Instruction/ maintenance manual of the product FR8316 Pelco
Go to page of 20
INST ALLA TION FT8316/FR8316 Fiber T ransmitter and Receiver Sixteen-Channel Digitally Encoded Video C2603M (6/06).
.
C2603M (6/06) 3 Contents Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Regulatory Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 C2603M (6/06) Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings.
C2603M (6/06) 5 The product and/or manual may bear the following marks: This symbol indicates that dangerous voltage constituting a risk of electric shock is present within this unit. This symbol indicates that there are important operating and maintenance instructions in the literature accompanying this unit.
6 C2603M (6/06) Regulatory Notices This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
C2603M (6/06) 7 Product Overview DESCRIPTION The FT8316/FR8316 fi ber transmitter and receiver provide the ability to transmit up to 16 composite video channels over one optical fi ber (refer to Figure 1).
8 C2603M (6/06) MODELS The FT8316/FR8316 fi ber transmitter and receiver consist of the following series of models: Multimode Models:* FT8316MSTR Sixteen-channel fiber optic video transmitter; multi.
C2603M (6/06) 9 FRONT PANEL The front panel of the FT8316 transmitter and FR8316 receiver provides LED indicators that a llow you to monitor signal status, laser status (transmitter only), and operating power. The following sections provide a view of the front panel of the transmitter and receiver.
10 C2603M (6/06) FRONT PANEL - FR8316 RECEIVER Figure 3 illustrates the front panel of the FR8316 receiver. Figure 3. Front Panel of FR8316 Receiver For detailed information about the front-panel indicators, refer to the T roubleshooting section.
C2603M (6/06) 11 REAR PANEL Connections to the FT8316 transmitter and FR8316 receiver are made to the rear panel of the modules (refer to Figure 4). Figure 4. Rear Panel of FT8316 T ransmitter and FR8316 Receiver For additional information about rear-panel connections, refer to the Installation section.
12 C2603M (6/06) Installation PACKAGE CONTENTS The following items are supplied: 1 FT8316 transmitter or FR8316 receiver 1 Regulated switching power supply with either of the following: • Four plug adapters (North American, Australian, U.
C2603M (6/06) 13 CONNECTIONS Connections to the FT8316 transmitter and FR8316 receiver are made on the rear panel of the modules and consist of the following: • Power connection NOTES: – A 12 VDC or 24 VAC power supply can be used to power the transmitter/receiver when used as a stand-alone module.
14 C2603M (6/06) T roubleshooting LED indicators on the front panel of the FT8316 transmitter and FR8316 receiver (refer to Figure 2 and to Figure 3, respectively) allow you to monitor signal status , laser status (transmitter only), and operating power .
C2603M (6/06) 15 Video Present LED (Continued) Red on receiver Incoming video signal is not present on the channel. Optical signal is not being received from the trans- mitter . Optic Fault LED is also red. Refer to the Optic Fault LED - Receiver section in this table.
16 C2603M (6/06) Optic Fault LED - Receiver Green The optical signal is being received from the transmitter . – No action required. Red The optical signal is not being received from the transmitter . T ransmitter is not powered on. Check power connections.
C2603M (6/06) 17 Specifications VIDEO Number of Channels 16 Modulation T ype Pulse code modulation, 8-bit resolution Video Input (FT8316)/ 1.0 Vp-p, 75 ohms; NTSC, PAL, and SECAM Video Output (FR8316) Bandwidth 6.5 MHz Gain Unity Crosstalk -50 dB typical at 3.
18 C2603M (6/06) OPTICAL POWER BUDGET AND TRANSMISSION DIST ANCE Model No. Wavelength Optical Power Budget Maximum T ransmission Distance T ransmitter Compatible Receiver Multimode (62.5/125 µm) FT8316MSTR FR8316MSTR 1275 nm 1300 nm 18 dB* † 1 km (0.
PRODUCT WARRANTY AND RETURN INFORMATION WARRANTY Pelco will repair or replace, without charge, any merchandise proved defective in material or workmanship for a period of one year after the date of shipment.
Worldwide Headquarters 3500 Pelco Way Clovis, California 93612 USA USA & Canada T el: 800/289-9100 Fax: 800/289-9150 International T el: 1-559/292-1981 Fax: 1-559/348-1120 www.
An important point after buying a device Pelco FR8316 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Pelco FR8316 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Pelco FR8316 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Pelco FR8316 you will learn all the available features of the product, as well as information on its operation. The information that you get Pelco FR8316 will certainly help you make a decision on the purchase.
If you already are a holder of Pelco FR8316, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Pelco FR8316.
However, one of the most important roles played by the user manual is to help in solving problems with Pelco FR8316. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Pelco FR8316 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center