Instruction/ maintenance manual of the product PLMS Atlas
Go to page of 4
Model PLMS Features • Light comes on when motion is detected. • Automatically controls existing post light. • Dual Light Level. • Photocell keeps the light off during day- light hours. This package includes: 240-031-A © 2003 Atlas Lighting Products, Inc.
2 598-1095-01 INST ALLA TION SPECIFICA TIONS Range . . . . . . . . . . . Up to 30 ft. (9.1 m) [varies with surround- ing temperature] Sensing Angle . . . . . U p t o 1 5 0 ° , 360 ° adjustable Sensor Capacity . . . Up to 360 Watts (3.0 A.) Maximum Power Requirements 120 VAC, 60 Hz Operating Modes .
3 598-1095-01 ADJUSTMENTS ❒ Turn on the circuit breaker and light switch. NOTE: Sensor has a 1 1 / 2 minute warm up period before it will detect motion.
4 598-1095-01 SYMPTOM Light stays on continuously. Light flashes on and off. POSSIBLE CAUSE 1. The sensor is pointed at nearby objects that cause heat to trigger the sensor. (Aim the sensor away from nearby objects) . 2. The sensor is pointed toward a heat source like an air vent, dryer vent, or brightly-painted heat-reflective surface.
An important point after buying a device Atlas PLMS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Atlas PLMS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Atlas PLMS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Atlas PLMS you will learn all the available features of the product, as well as information on its operation. The information that you get Atlas PLMS will certainly help you make a decision on the purchase.
If you already are a holder of Atlas PLMS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Atlas PLMS.
However, one of the most important roles played by the user manual is to help in solving problems with Atlas PLMS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Atlas PLMS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
