Instruction/ maintenance manual of the product 170S8FS Planet Technology
Go to page of 26
.
Trademarks Copyrigh t PLAN ET T echnolog y Corp. 2002. Contents subject to revis ion with out prio r notice. PLANET is a registered trademark of PLANET T echnology Corp. The information in this manual is su bject to cha nge withou t notice. All other t rademarks b elong to the ir respect ive owners.
1 T able of Contents Chap ter 1 INTR ODU CTIO N 1 1.1 B rief ing 1 1.2 F ea ture s 1 Chap ter 2 UNP ACKI NG A ND I NST ALL 3 2.1 U npack ing 3 2.2 I nsta llati on 3 2.3 D ecid ing H ow t o In stal l th e S yste m 3 Chap ter 3 IDEN TIF YING FRO NT P ANEL 7 3.
1 Chapter 1 Introduction 1.1 Brieng The Intelligent Media Converter Chassis WMC-1600R series provides 16-slot and one management system in the 19”-rack chassis.
2 3.
2 3 Chapter 2 UNP A CKING AND INST ALL This chapter provides unpacking and setup information for the Media Converter Chassis. 2.1 Unpacking Open the box of the WMC-1600R and carefully unpack it.
4 5 2.3.1 Mounted to 19-inch standard rack Use the rack -mount brackets and screws to install the chassis into any EIA 19" standard rack. Step 1: Attach the brackets to each side of the chassis. Apply four screws to each side and secure them tightly .
4 5 Step 3: Carefully slide in the module and fasten the hand screw clockwise by using hand or screwdriver until it is fully and rmly tted into the slot of the chassis. Insert the media converter module into an available slot and fasten the hand screw clockwise by using hand or screwdriver .
6 7 2.3.4 Installing and Removing the Power Supply T o remove a power supply out the chassis, you have to loose the hand screw counter clockwise and pull out the power supply from the chassis. T o install a power supply to the chassis, you have to fasten the hand screw clockwise and slide in the power supply to the chassis.
6 7 Chapter 3 IDENTIFYING FRONT P ANEL This section identies all the major components of the front panel. The front panel is shown, followed by a description of each panel feature. The indicator panel is described in detail in the next chapter . 3.
8 9.
8 9 Chapter 4 CONFIGURING THE SY STEM This chapter provides network managers and system administrators with information about how to congure the WMC-1600R via the Management interface.
10 1 1 4.1.3 Management Setting Through T erminal Emulator There are three items in the Main Menu, System Function, Conguration and SNMP Conguration. 4.1.3.1 System Function There are three items in System Function menu, “Software Reboot, Factory Reset, and Image Update.
10 1 1 There are four items in the Conguration menu, “General Conguration, System Conguration, Media Converter Chassis and Media Con verters. 4.1.3.2.1 General Conguration Hardware revision: noted the version of the hardware. BIOS revision: noted the version of the BIOS.
12 13 4.1.3.2.3 Media Converter Chassis The screen will show out the power status of the WMC-1600R. V stands for “yes” and X stands for “No” . Plug in: indicates if Power 1 or 2 was plugged in or not. Power Fail: indicates if the Power 1 or 2 is fail or not.
12 13 Device LLCF: Link Loss Carry F orward, “on” or “off” . Enable: to enable the link of the Device, “on” or “off” . Media 1 LLR: Link Loss Return, “on” or “off” . Auto: “ A” for Auto-Negotiation or “F” for “forced Mode” .
14 15 4.1.3.3 SNMP Conguration Get Community Name: to get the device community name (default = public). Set Community Name: to set the device community name (default = private). Trap Community Name: to authorize the device trap community name (default = public).
14 15 4.2 Management through Web browser The WMC-1600R is accessible using a Web browser (IE explorer , Netscape Communications, etc.) to open up the chassis monitoring system. The default IP Address for the chassis system is “192.168.1.1” , and the default Login name and password is both “root” .
16 17 4.2.1 System Function There are four items in System Function menu, “Software Reboot, Factory Reset, Image Update and Conguration Update. 4.2.1.1 Software Reboot Reboot the management module in order to run the new setting properly . 4.2.1.
16 17 System Name: to authorize the device system name. Location: to show the WMC-1600R where it is located. Refresh time: to set the refreshing time of the device through the web. NOTE: After configuring the system device, need to press the save button to save the setting.
18 19 Warm Start trap: to set the trap when the device had been reset (default = enable). Authentication Fail Trap: to set the warning trap when the community name of the device and workstation are different (default = enable). Power Fail Trap: to set the Power F ail T rap (default = enable).
18 19 4.2.2.5 Redundant Backup Setting The redundant function is to change the master line to the slave line in case of the linking fails happen. The Redundant functions were set xed, the master slot is slot 1(odd number slot) and the slave slot is slot 2(even number slot), and there are eight redundant groups in all.
20 21.
20 21 Chapter 5 TECHNICAL SPECIFICA TIONS Chassis System Capacity Sixteen bays for housing up to sixteen media converters Material Steel Power One power supply provided, hot-swappable *A second power .
22 Management Module Standards IEEE802.3 10Base- T Ethernet IEEE802.3u 100 Base- TX F ast Ethernet IEEE802.3x flow control Protocol CSMA/CD Data T ransfer Rate Ethernet: 10Mbps (half duplex), 20Mbps (.
22 Part No.:EM-WMCv1.
An important point after buying a device Planet Technology 170S8FS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Planet Technology 170S8FS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Planet Technology 170S8FS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Planet Technology 170S8FS you will learn all the available features of the product, as well as information on its operation. The information that you get Planet Technology 170S8FS will certainly help you make a decision on the purchase.
If you already are a holder of Planet Technology 170S8FS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Planet Technology 170S8FS.
However, one of the most important roles played by the user manual is to help in solving problems with Planet Technology 170S8FS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Planet Technology 170S8FS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
