Instruction/ maintenance manual of the product CD/DVD Duplication System DUP-07 Primera
Go to page of 77
061605-510800-(01) Automated Optical Disc Duplication & Printing System AUTOPRINTER TM CD/DVD Duplication System USER’S MANUAL © 2005 All rights reserved Cover.
TABLE OF CONTENT TITLE PAGE Welcome!........................... ...................... .................... ....... 1 Before you start…………………………………………... 1 LCD Front Panel……………………………… ………….
TITLE PAGE Menu Overview 11. EDIT AUDIO TRACK …….….………………… 66 12. SETUP Language ………………….…….….…………….. 66 Auto Start ………………………….….………….. 66 Read Error Skip…………..……….
- 1 - W elcome! Our duplicator is a reliable, high performance, high speed, standalone CD and/or DVD dupli cator . W ith its professional industrial design and simple beginn er user interface, it will make your duplicating experien ce easier than ever .
- 2 - 4. External Connection W a rning: If you have an external connecti on installed in your duplicator , you will see the USB/Firewire sw itch(s) on th e back of your duplicator , and/or USB/Firewire sticker(s) on your writer front drive panel(s).
- 3 - 7. Double Layer Partition Issue Attention: If you have a 16x speed or higher duplicator with double layer/dual layer DVD9 capability , the hard drive partitions are set at the d efault size of 9GB each to accommodate for the expanded size of the DVD9 format.
- 4 - LCD Front Panel : Up : Down : Forward; Enter; OK; Execute the function : Backward; Escape; go back to the previous function : Shortcut to make a copy : Shortcut to make simulation of copying process : Shortcut to change the duplication speed : Shortcut to Load and Copy .
- 5 - T utorial Guide: I. Make Disc-to-Disc Copies This process will copy your m aster disc into several blank discs simultaneously . However , due to its simultaneous nature, a good conditioned master disc and lower recording speed is necessary for high success rate and good quality duplications.
- 6 - Make sure it is located at the “ Reader Port ”. If not, then you need to press UP or DOWN navigation button to search for it. If your duplicator does not equip any Reader port, then please choose the device with the W riter Port number as your Master Reading Source.
- 7 - b. Then. you will see the Counter Selection Menu like the following: c. The Counter Selection Menu will let you choose how many copies you want to make fo r your project. This Counter Selection feature will allow the duplicator to count the number of copies you’ve m a de and prompt you when the desired number of copies has been m ade.
- 8 - T o enter the number , you need to use UP or DOWN button to select the number for each digit and use “>>” or “<<” button to move the cursor position right o r left, once you’ve finished, move the cursor to “OK” and press “>>”.
- 9 - Now you shall see the following screen: OR If either one of the ABOV E 2 screens are display ed for more than 2 m inutes, please check your Master Disc or Blank Discs for quality . d. Please allow 5-10 seconds for th e duplicator to detect your Master Disc and Blank Discs as well.
- 10 - Once the number of blank discs you inserted matches the num ber of discs detected on the screen. Then press “>>” (if you are not using Auto S tart or wish to speed up the process) to confirm and the following Processing screen will appear .
- 1 1 - Once the duplication run is com pleted, the successful copies will be ejected and you shall see the following screen: O Next, refill more blank medi a to continue making m ore copies, or you can press “<<” to terminate your project and go back to the main menu.
- 12 - T utorial Guide: II. Make Hard Drive(HDD)-to-Dis c Copies (For Duplicator w / HDD installed) Copying from the Hard Drive is the best way to make copies. Overall, there are 4 benefits to copying from the Hard Drive: i. Performance – Duplicating f rom the Hard Drive will be able to boost the DVD duplication speed to 8x or above.
- 13 - For example, if you have a 40GB Hard Drive, then you can calculate the number of DVD-5 fo rmat partitions by: 40 / 5 = 8. Since there is 1 partition reserv ed for the system use, you will have 7 partitions to use. Or you can calculate the number of DVD-9 format partitions by: 40 / 9 = 4.
- 14 - a. Use UP or DOWN arrow button to navigate to the following screen. b. Press “>>” to enter Select Source Menu and you shall see the following: Make sure it is located at “ Hard Drive” . If not, then you need to press UP or DOWN navigation button to search for it.
- 15 - b. Press “>>” to enter Hard Drive Setup Menu and you shall see the following: c. Now , load your master disc on to the Hard Drive. T o do so, use UP or DOWN arrow button to navigate to the following screen. d. Press “>>” to enter Load Partition Menu and you shall see the following: e.
- 16 - f. Now , you can name the partition yo u are about to load into the Hard Drive. T o enter the name, you need to use the UP or DOWN buttons to select th e character and use “>>” or “<<” button to move the cursor position and once you’ve finished, move the cursor to “OK” and press “>>”.
- 17 - g. Now you shall see the following confirm ation screen: h. Press “>>” button to confirm. Once your master disc has been recognized. The loading progress indicator will be displayed and you shall see the following i.
- 18 - b. Use UP or DOWN arrow bu tton to navigate to the following screen. 4. S tart the Copy Process. a. Now , please insert your blank discs into the writer trays (make sure the Reader T ray is empty) and press “>>” button to enter COPY menu.
- 19 - Or , you can select “Specify Counter” between 1 to 9999 by pressing the UP or DOWN naviga tion button to the below screen: Then please press “>>” button to s u bmit. Y ou shall see the screen below: T o specify the number of copies for your project, you need to enter/input a 4-digit number .
- 20 - iii. Press “DOWN” button cons ecutively until “0” is displayed. iv. Press “>>” button once to move the cursor to the next position. v. Press “DOWN” button cons ecutively until “2” is displayed. vi. Press “>>” button once to move the cursor to the next position.
- 21 - d. Please allow 5-10 seconds for th e duplicator to detect your Hard Drive partition and Bla nk Discs as well. After your Hard Drive partition and Blank Discs have been recognized, then you shall see the following screen: By default, the “Auto S tart” setting is set to “Auto”.
- 22 - e. After 2 or 3 seconds of processing time, the following Copy Progress Screen will appear . Counter Specified No Counter OR It is normal to see the pr ogress ind icator stays at 0- 10% and 100% for approximately 30 seconds for CD duplication and up to 1 minute for DVD duplication.
- 23 - Next, refill more blank medi a to continue making m ore copies, or you can press “<<” to terminate your project and go back to the main menu.
- 24 - T utorial Guide: III. Select the Duplication Speed This process will allow you to adjus t the duplication speed subject to your various needs. By default, the duplication speed will be set to the optimal speed. However , under some ci rcumstances, you might want to lower down the duplication speed.
- 25 - 2. Enter Speed Selection Menu. Then, you can press “>>” button to enter into Speed Selection Menu. Y ou shall see the following: 3. Select Duplication Speed T ype. There are four types of recording speed: • CD to CD: Copy CD Disc to CD-R Discs directly .
- 26 - 4. Select Desir e d Duplication Speed. Once you have submitted the duplication speed type, you shall see the following: Y ou can press UP or DOWN button to select the desired speed and then press “>>” to submit your speed selection. 5.
- 27 - T utorial Guide: IV . Select the Master Reading Sour ce When you try to make a copy , you need to specify where the master disc is. Is it in the Reader tray? Or is it an Im age inside the Hard Drive? This tutorial will sh ow you how to change the Master Reading Source to satisfy your needs.
- 28 - iv. Convenience – W ith your master discs stored inside the Hard Drive, you can have access to each one easily . There is no need to carry your master discs; they are all stored inside the duplicator . • Disc-to-Disc copy (read for W RITER tray) – This is the case when your master disc is full of scratches.
- 29 - 3. Select Desir ed Master Reading Device. Y ou can press UP or DOWN button to select the desired Master Reading Source. Then, you can press “>>” to submit your Source Selection.
- 30 - T utorial Guide: V . Load Master Disc onto the Hard Drive In order to copy from the Hard Dr ive, you are required to load your master disc onto a hard drive partition.
- 31 - b. Press “>>” to enter Select Source Menu and you shall see the following: Make sure it is located at “ Hard Drive” . If not, then you need to press UP or DOWN navigation button to search for it. c. Press “>>” to submit your selection.
- 32 - d. Press “>>” to. enter Load Partition Menu and you shall see the f ollowing: e. Now , you have a choice to load your master disc into a new (empty) partiti on or overwrite one of the existing partitions if any exists. Y ou can simple press UP or DOWN arro w button to select your partition and press “>>” to subm it.
- 33 - f. Now , you can name the partition yo u are about to load into the Hard Drive. T o enter the name, you need to use UP or DOWN button to select the character and use “>>” or “<<” button to m ove the cursor position and once you’ve finished, move the cursor to “OK” and press “>>”.
- 34 - g. Now you shall see the following confirm ation screen: h. Press “>>” button to confirm. Once your master disc has been recognized. The loading progress indicator will be displayed and you shall see the following i.
- 35 - T utorial Guide: VI. Rename Existing Hard Drive Partition Name When you load your master disc to a hard drive p artition, you are asked to give it a name. However , if you don’ t like the name you entered before, you can rename it at anytim e afterwards.
- 36 - 5. Use UP or DOWN arr ow button to find the d esir ed partition and then pr ess “>>” to submit your selection and you shall see the follow ing confirmation scr een: 6. Pr ess “>>” once again to confirm it and you shall see the following: 7.
- 37 - Once you’ve done above, you shall see the following: Then, you will be dir ected back to HDD Image Setup Menu. NOTES Partition FUN2 Renamed! Hard Drive Setup 3.
- 38 - T utorial Guide: VII. Delete Existing Hard Drive Partition Permanently If for some reason you would like to delete your existing hard drive partition permanently , you can do the following: 1. Use UP or DOWN arr ow button to navigate to the following scr een.
- 39 - 5. Use UP or DOWN arr ow button to find the d esir ed partition and then pr ess “>>” to submit your selection and you shall see the follo wing: 6. Pr ess “>>” to confirm and you shall see the following for 2 seconds. 7. Then, you will be dir ected back to Hard Drive Setup Menu.
- 40 - T utorial Guide: VIII. Changing the Hard Drive Partition Size If you have a 16x speed or hi gher duplicator with double layer/dual layer DVD9 capability , the hard drive partitions are set at the default size of 9GB each to accomm odate for the expanded size of the DVD9 format.
- 41 - 4. Pr ess “>>” to enter Partition Size Menu and you shall see the follow ing: 5. Use UP or DOWN arr ow button to find the d esir ed partition size and then pr ess “>>” to submit your selection. Then you will be directe d back to Hard Drive Setup Menu.
- 42 - T utorial Guide IX. Change the SETUP settings Most of the internal settings and information is stor ed inside the SETUP menu. T o explore and modify them is simple.
- 43 - 5. Use UP or DOWN arr ow button to modify th e setting to “Full” and then pr ess “>>” to submit your selection and you shall see the follo wing: 6. If you would like to modify mor e settings, then please go back to step 3. Otherwise, pr ess “<<” button to bring you back to main menu.
- 44 - T utorial Guide: X. Audio CD Editing This process will guide y ou to perform the Audio T rack Selection feature. This process will help you combine audio tracks from various CDs into a single customized audio CD.
- 45 - 1. Going to the “Edit Audio T r ack” menu Press UP or DOWN arrow button to navigate to the following screen. 2. If your duplicator does not have a Hard Drive installed, please skip to S tep 5.
- 46 - 3. Once you made your selection, you shall see the following: OR When you see above, please insert an audio CD that contains your favorite track(s) in the Ma ster Reading T ray and a blank CD-R media into one of W riter T r ays.
- 47 - Y ou can press “>>” button to submit your selection. Y ou will see the following: If the capacity of total audi o tracks you have selected is more than your blank CD-R disc’ s capacity , you shall see the f ollowing two screens flashing: If you see messages above, please press “>>” button to continue.
- 48 - If you choose to insert another au dio CD for more songs, you need to press DOWN arrow button unt il you see the f ollowing screen: Then, press “>>” button to conti nue. After that, your old master disc will be ejected and you can in sert another audio CD into the Reading T ray .
- 49 - When the whole process completes, your m ixed copy will be ejected and you shall see the following: Then, you will be directed back to the m ain menu: NOTES Job Completed! Press OK to Finish DUPLICATOR 5.
- 50 - Example of Editing Audio T racks to Hard Drive (For Duplicators with Hard Drive Installed): W e need to create a new Audio CD from 2 dif ferent Discs. CD1: song 2, and song 4 CD2: song 3, song 4 and song 5 1. Go to function 1 1. Edit Audio T r ack 2.
- 51 - 8. Use the UP or DOWN arrow button until you see following: 9. Press “>>” Once you submit your selection, you shall see the following: 10.
- 52 - appear on the left of “T rack 3” like following: 14. Use the UP or DOWN arrow button until you see “T rack 4” on the 2 nd line, and then press “>>” to conf irm. A “*” symbol will appear on the left of “T rack 4” like following: 15.
- 53 - 19. Since we have finished selecti ng all of our tracks. Press “>>” button to continue to finalize. Y ou shall see the following screen: 20. Press “>>” button again to c onfirm the finalization and you shall see the following screen: 21.
- 54 - T utorial Guide XI. Intr oduction to Account Management Featur e This feature allows you, the admini strator , to have the power to: 1. Create user accounts and passwords to prevent unauthorized use of this duplicator . 2. Edit existing user account information, including name and password.
- 55 - 3. Enable the Account Management feature by turning ON the “Password on Boot UP” setting. Please refer to Feature Overview “5. Password on Bootup” below for more information. This duplicator comes with standard license which allows you to create up to 32 users.
- 56 - Once your password is validated, you will be guided to the main Manage Accounts screen like below: Ther e ar e five menus in the Manage Accounts: 1. V iew User This menu allows you to view current existing user accounts. - User “Admin” is the adm inistrative account.
- 57 - Press “>>” button to enter in to this m enu and press “<<” button to go back to the main m enu or cancel the current selection. 3. Edit User Info This menu allows you to change the existing user account’ s name and password.
- 58 - - User “Admin” is the adm inistrative account; you can NOT delete this account. Press “>>” button to enter in to this m enu and press “<<” button to go back to the main m enu or cancel the current selection. 5. Password on Bootup This menu allows you to enable/disable account management upon boot up.
- 59 - T utorial Guide XII. Intr oduction to Duplication Mode In order to achieve 8x or hi gher duplication performance; there are 3 factors that need to be certified as 8x or higher speed: 1. Master Disc Reading Speed 2. Computer Controlling Speed 3.
- 60 - T o simplify this process for anyone, we introduced a new feature called “Load and Copy” under the new category “Duplication Mode”. This f eature reduces the “Duplication from Hard Dr.
- 61 - Advantage: - Faster duplication in a long run. (Un-Restricted DVD Duplication speed supported by the duplication blank media) - S table duplication. - Reliable duplication Disadvantage: - The loading time m ay have an impact on overall duplication time for small duplication jobs.
- 62 - Press UP or DOWN Button Consecutively until you see following: Press “>>” button once. You shall see following: Press UP or DOWN Button Consecutively until you see following: Press “>>” button once. You shall see following: Press UP or DOWN Button Consecutively to select your desired mode.
- 63 - Setup Guide I. Setup IEEE 1394 Fir ewir e / USB 2.0 device(s) For first time use 1. T urn your duplicator of f if it is running. 2. T urn your computer of f if it is running. 3. Set the IEEE 1394 Firewire/USB 2.0 switch to “ON” at the back of your duplicator .
- 64 - Menu Overview: 1. COPY This menu will guide y ou to make CD/DVD copies. Before you enter this menu to copy , please make sure you have selected the correct Master Reading Source. For more information, please refer to “ T utorial Guide I – Make Disc- to-Disc Copies ” or “T utorial Guide II – Make Hard Drive(HDD)-to-Disc Copies” 2.
- 65 - 4. TEST + COPY This menu will guide y ou to perform the sim ulation of copying process and if everything has passed during the simulation, a real copying pro cess will be perform ed. If there’ s an error encountered during the simulation, an error message will be displaye d and the copying process will no t be initiated.
- 66 - 9. ERASE This menu will guide y ou to erase your rewritea ble discs in the WRITER T ray . There are two options to erase your rewriteable discs: Full Erase: It will erase th e entire dis c which will make it im possible to be recovered. Quick Erase: It will erase the index of the rewritable disc, not the data section.
- 67 - When it is Of f, the copy process requires you to press “>>” button to confirm the duplication. When it is Auto, if your duplic ator has detected 3 blank discs on a 4 tar get or higher duplicator for example and didn’ t detect any additional blank discs for 30 seconds, then the duplication will be started au tomatically .
- 68 - 12.6 Buzzer This setting will allow you to choose whether you want to hear a beep when you press a button or when a task has been completed. 12.7 S tartup Menu This setting will allow you to choose which menu you would like to see first when you turn on the duplicator .
- 69 - 13. Utility 13.1 Disc Info If you are uncertain about the type of blank recordable media you are using, the duplicat or is equipped with the disc info function to help identify and notify you of the disc information encoded within. This function (Disc Info ) can be found in the “U tility” menu.
- 70 - 13.4 Device Info By entering this menu, you will be able to see th e information for devices built inside your duplicator . That information includes but lim ited to manufacture, model number , etc. 13.5 Load Default This function will reset all of the options back to manufacture’ s default.
- 71 - T urning of f your duplicator withou t perform this function will increase the risk of damaging your duplicator . NOTES.
- 72 - T rouble Shooting 1. No display on LCD or the unit does not operate when the pow er is on. 9 Check the connection of power cable and the environment of power outlet is normal. 9 Make sure the power voltage matches the volt age of your power outlet.
- 73 - 5. The failure rate is high. 9 Lower the “write speed” and try again. Please refer to “ T utorial III – Select the Duplication Speed .” 9 Quality of blank disc may be poor .
- 74 - 11. How do I reset my duplicator back to default? I) Use UP or DOWN arrow bu tton to navigate to the following screen. II) Press “>>” to enter Setup Menu and you shall see the following: III) Use UP or DOWN arrow bu tton to navigate to the following screen.
An important point after buying a device Primera CD/DVD Duplication System DUP-07 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Primera CD/DVD Duplication System DUP-07 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Primera CD/DVD Duplication System DUP-07 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Primera CD/DVD Duplication System DUP-07 you will learn all the available features of the product, as well as information on its operation. The information that you get Primera CD/DVD Duplication System DUP-07 will certainly help you make a decision on the purchase.
If you already are a holder of Primera CD/DVD Duplication System DUP-07, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Primera CD/DVD Duplication System DUP-07.
However, one of the most important roles played by the user manual is to help in solving problems with Primera CD/DVD Duplication System DUP-07. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Primera CD/DVD Duplication System DUP-07 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
