Instruction/ maintenance manual of the product PFSY2925.0 ProForm
Go to page of 20
Visit our website at www .proform.com new products, prizes, fitness tips, and much more! V CAUTION Read all precautions and instruc - tions in this manual before using this equipment. Save this manual for future reference. Model No. PFSY2925.0 S erial No.
2 W ARNING DECAL PLACEMENT W ARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 IMPORT ANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 1. Read all instructions in this manual and all warnings on the resistance system before using the resistance system. Use the resist- ance system only as described in this manual. 2. It is the responsibility of the owner to ensure that all users of the resistance system are adequately informed of all precautions.
ASSEMBLED DIMENSIONS: Height: 83 in. / 21 1 cm Width: 60 in. / 152 cm Depth: 48 in. / 122 cm 4 Resistance Bars Pulley Housing Upright Handle Short Cable Squat Bar Upright Base Base Right Side Left Sid.
5 ASSEMBL Y 1. Attach three Plastic Feet (1) to the Base (2) with three M4 x 16mm Screws (61). Attach the Base Cover (4) to the Base (2) with two M4 x 50mm Screws (66). 1 Before beginning assembly , make sure you understand the information in the box above.
6 2. Attach the Upright Base (5) to the Base (2) with four M10 x 76mm Button Bolts (65) and four M10 N ylon Locknuts (56). 3. Identify the Left Upright (6) and the Right Upright (7) by the “L” and “R” stickers.
7 4. Attach the two 10-pound Short Caps (81) to the 10-pound Center Bar (45) with two M4 x 12mm F lat Head Screws (58). U sing ten M4 x 12mm Flat Head Screws (58), attach the two 10-pound Caps (53) to.
8 9. Attach a Pulley Bracket (17) to the indicated “U”- channel (18) with an M10 x 129mm Button Bolt (72), two M10 W ashers (59), and an M10 Nylon Locknut (56). W rap the Long Cable (42) over a 90mm Pulley (38). Attach the Pulley inside the Pulley Bracket (17) with an M10 x 41mm Button Bolt (71) and an M10 Nylon Locknut (56).
9 1 1. Route the Long Cable (42) under a 90mm Pulley (38). Attach the Pulley , a Cable T rap (39), and two Finger Guards (37) to the indicated hole in the Base (2) (see the inset drawing) with an M10 x 47mm Button Screw (76) and an M10 W asher (59). Make sure that the Cable T rap is oriented to hold the Cable in the groove of the Pulley .
10 15. Make sure that the Long Cable (42) is below the rod in the Swivel Arm (12). Attach a 90mm Pulley (38) inside the Swivel Arm (12), under the Long Cable (42), with an M10 x 51mm Button Bolt (74), two M10 W ashers (59), two 5mm Spacers (82), and an M10 Nylon Locknut (56).
1 1 19. Slide four Foam Pads (32) onto the Pad T ube (35) and the Leg Lever (9). 20. Set the Seat Frame (8) onto the Upright Base (5). 21. Make sure that all parts have been properly tight- ened. The use of the remaining parts will be explained in ADJUSTMENTS, beginning on the next page.
12 This section explains how to adjust the resistance system. See the EXERCISE GUIDELINES on page 15 for important information about how to get the most benefit from your exercise program. Also, refer to the accompa- nying exercise guide to see the correct form for each exercise.
13 42 6 A TT ACHING THE SQUA T BAR The Squat Bar (25) can be attached to the Short Cables (43) at the squat stations (see A TT ACHING THE PULLEY HOUSINGS above) with the two Extension Straps (27) and four Clips (29). Adjust the length of the Extension Straps as necessary .
14 CABLE DIAGRAM The cable diagram shows the proper routing of the Long Cable (42). Use the diagram to make sure that the cable has been assembled correctly . If the cable has not been correctly routed, the resistance system will not function properly and damage may occur .
15 EXERCISE GUIDELINES THE FOUR BASIC TYPES OF WORKOUTS Muscle Building— T o increase muscle size, use a high amount of resistance. Y our muscles will adapt and grow as you progressively increase the intensity of your exer- cise by: • changing the level of resistance • changing the number of repetitions or sets performed.
Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. See the back cover of the user ’s manual for information about ordering replacement parts.
M6 W asher (60) M8 W asher (54) M8 Nylon Locknut (57) M10 W asher (59) M10 Nylon Locknut (56) M10 x 81mm Button Bolt (68) M10 x 41mm Button Bolt (71) M10 x 47mm Button Screw (76) M8 x 100mm Button Bol.
22 22 62 2 3 62 66 66 61 67 1 1 61 1 61 67 62 4 65 65 79 79 79 79 56 56 5 37 39 38 59 37 76 39 38 59 76 37 37 39 38 59 76 76 39 37 37 38 59 64 60 64 60 6 56 56 30 23 23 7 9 78 77 63 55 25 78 77 63 33 33 32 32 34 44 34 61 36 56 33 32 3 4 3 1 8 32 33 60 75 60 64 64 35 4 EXPLODED DRA WING A—Model No.
EXPLODED DRA WING B—Model No. PFSY2925.0 R0805A 24 80 10 21 56 59 12 38 59 74 42 42 38 59 74 12 56 59 24 80 21 68 68 41 41 37 38 39 37 69 37 38 39 37 69 28 26 27 29 29 57 54 54 16 14 13 15 70 43 40 .
LIMITED W ARRANTY ICON Health & Fitness, Inc. (ICON), warrants this product to be free from defects in workmanship and material, under normal use and service conditions, for a period of five (5) years from the date of purchase. ICON warrants the resistance bars for the lifetime of the product.
An important point after buying a device ProForm PFSY2925.0 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ProForm PFSY2925.0 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ProForm PFSY2925.0 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ProForm PFSY2925.0 you will learn all the available features of the product, as well as information on its operation. The information that you get ProForm PFSY2925.0 will certainly help you make a decision on the purchase.
If you already are a holder of ProForm PFSY2925.0, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ProForm PFSY2925.0.
However, one of the most important roles played by the user manual is to help in solving problems with ProForm PFSY2925.0. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ProForm PFSY2925.0 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
