Instruction/ maintenance manual of the product PLVW1048VGA PYLE Audio
Go to page of 26
PL VW1048VGA 10.4” FLIP-DOWN IN-CAR DISPLA Y (+VGA) USER MANUAL V1.0.
INDEX NO CONTENT P AGE 1 Specification 2 Installation 3 OSD function 4 Content of OSD function 5 Accessories 6 Outside dimension 7 Pr ecaution 8 Remark.
1. Specification CAR-TV 10.4” + VGA function Resolution 800(H) x 600(V) Size 10.4” TFT LCD Brightness 200 cd/ ㎡ (Typ) Video input Composite Video(RCA)(F) × 2 (NTSC,PAL,SECAM) Not support mono signal Audio input Stereo Sound Input (RCA)(F) × 2 PC Sound Input (Phone Jack) × 1 PC input Analog 0.
Instruction to fix the screw of the iron slice 2. Installation St e p 1 : Attention: It’ s dir ectional for the ir on slice..
Instruction to fix the screw of the monitor Scr ew hole 4 mm.
C a r ro o f Ir on slice St e p 2 : Install the monitor on the r oof. C a r ro o f Mounting plate.
St e p 3 : Fix the monitor on the ir on slice with the scr ews. See step 1 Completed.
3. OSD function VIDEO contr ol keys ： 1 2 3 4 5 6 dome lights ON/OFF 1. Power ： When you push this button, it will Power ON or OFF the LCD. 2. ” — “ ： When you push this button, it will decrease the degr ee of the function that you selected.
PC/VIDEO r emote control function ： 1. POWER ： When you push this button, it will Power On or Off the LCD. 2. V1/V2: Y o u could select V1 or V2 or PC with this button. 3. MENU ： Show Function Menu List and Select the function on the menu, when you push this key .
4. Content of OSD Function OSD Adjustment for PC function Pr ess “MENU” Button ， display will show following pictur e. BIOS VERSION PIP Enable Auto T u ne Bright ness Contrast Color Quality Po si t i on Mute FM Default Sav e Exit 800X600 H:37.6KHz V:59.
4.1 PIP CHANNEL SELECT ( Under PC Mode ) VIDEO 1 VIDEO 2 PIP OFF RETURN VIDEO 1: Set VIDEO 1 Input （ Press “MENU” to enter ） VIDEO 2: Set VIDEO 2 Input （ Press “MENU” to enter . ） PIP OFF : exit PIP function. RETURN: Back to new setting.
4.4 CONTRAST CONTRAST : Adjust white color level 0~63 of the image. 4.5 COLOR 9300 7500 6550 USER RETURN 9300K : Set color to 9300K （ Use “MENU” to enter ） 7500K : Set color to 7500K （ Use .
4.6 QUALITY SIZE PHASE TEST/GFX SHARPNESS RETURN SIZE : Adjust size of the image. PHASE : Adjust phase level 0~63 of the image. TEXT/ GFX: DOS MODE/ change T e xt 720x400 & Gfx 640x400. SHARPNESS : Adjust Sharpness level 0~15 of the image. RETURN: Back to new setting 4.
4.8 MUTE MuteOff MuteOn H:37.6KHz V:59.7 Hz Mute Off : Choose this to close the mute function. Mute On : Choose this to open the mute function 4.9 FM BIOS VERSION FM88.0MHZ FM88.1MHZ FM88.2MHZ FM88.3MHZ FM88.4MHZ FM88.5MHZ FM88.6MHZ FM88.7MHZ FM88.8MHZ FM88.
Channel in frequen cy m odul ation FM88MHz that the radio is adjus ted Receive the sound to export. Adjusting range: 88.0MHz~88.9MHz RETURN : Back to new setting 4.10 DEFAULT 5 OSD Adjustment for VIDEO function Press “MENU” Button ， display will show following picture.
PIC MODE : See 5.4 CONTRAST : See 5.5 SA TURA TION : See 5.6 HUE : See 5.7 DEF AUL T : Set default value. See 5.8 SA VE EXIT : Save all of adju stment & exit to OSD function. 5.1 BRIHTNESS BRIGHTNESS: Adjust LCD brightness level 0~63 of the image 5.
5.3 FM BIOS VERSION FM88.0MHZ FM88.1MHZ FM88.2MHZ FM88.3MHZ FM88.4MHZ FM88.5MHZ FM88.6MHZ FM88.7MHZ FM88.8MHZ FM88.9MHZ Ret u r n 800X600 H:37.6KHz V:59. 7Hz The signal carrier frequency o f the sound outputs the function: Can use Channel in frequen cy m odul ation FM88MHz that the radio is adjus ted Receive the sound to export.
5.5 CONTRAST CONTRAST : Adjust white color level 0~63 of the image. 5.6 SATURATION . SA TURA TION : Adjust color Satu ration level ~128~127. 5.7 HUE HUE : Adjust color Hue level –128~127 5.
5. Description of Accessories Accessory Description 1. V ideo, audio, power input See chart 1 2 Power cable+ Fuse(spec:3A/250V) Y ellow ： video input 1, video input 2 Red ： audio input (R)1, audio input(R)2 White ： audio input(L)1, audio input(L)2 Power input connector: Red: Anode Black: Ground See chart 2 3 IR transmitter: Receive 2.
4 Sound cable: PC audio output connect to audio input of monitor 5 PC audio input 6 RGB cable: connect PC to video input of monitor 7 PC video input.
Description of accessories : Chart 1:.
Chart 2:.
6. Outside dimension L:306.65mm W :304.40mm H:42.50mm.
.
7. Pr ecaution 1. It does not support mono signal. 2. When ther e’ s no input signal of PIP function, the feedback of OSD key may become slow . Y ou could just turn off the PIP window . 3. Do not apply Pr essur e to the scr een 4. Do not sprinkle any liquid to clean LCD.
8. Remark 1:M4 × 0.7 L= 5 mm scr ew × 6 2: ψ 4 L= 10 mm scr ew × 8.
An important point after buying a device PYLE Audio PLVW1048VGA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought PYLE Audio PLVW1048VGA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data PYLE Audio PLVW1048VGA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, PYLE Audio PLVW1048VGA you will learn all the available features of the product, as well as information on its operation. The information that you get PYLE Audio PLVW1048VGA will certainly help you make a decision on the purchase.
If you already are a holder of PYLE Audio PLVW1048VGA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime PYLE Audio PLVW1048VGA.
However, one of the most important roles played by the user manual is to help in solving problems with PYLE Audio PLVW1048VGA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device PYLE Audio PLVW1048VGA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
