Instruction/ maintenance manual of the product APS-30 Q-Logic
Go to page of 6
KEYLESS ENTR Y ALARM UPGRADE MODULE INST ALLA TION INSTRUCTIONS PRE - INSTALLATION NOTES : STAND ALONE PASSIVE ALARM When installing the APS-30 as a stand alone passive alarm system, the dip switches .
This alarm can be programmed to drive an electronic siren, or pulse the vehicle's horn. In the siren mode, the audible output will deliver a switched + 12 VDC output when the system is triggered. This allows for direct connection to an optional electronic siren.
SCENARIO A SCENARIO B SCENARIO C SCENARIO D RESULT APS-30 DISARMS NO CHANGE IN ALARM STATUS APS-30 DISARMS NO CHANGE IN ALARM STATUS DISARM #2 RED / BLACK WIRE NEGATIVE POSITIVE POSITIVE NEGATIVE DISA.
Two pin switches are included for use in protecting the hood and trunk ( or hatchback ) of the vehicle. The switches must always be mounted to a grounded, metal surface of the vehicle. It is important to select a location where water cannot flow or collect, and to avoid all drip gutters on hood and trunk fender walls.
Connect this wire to the DARK BLUE wire from the push-button manual override switch. Connect the BLACK wire from the switch to chassis ground. BLACK WIRE : CHASSIS GROUND Connect this wire to a solid, metal part of the vehicle’s chassis. ORANGE WIRE : 300 mA GROUND OUTPUT WHEN ARMED This wire is provided to control the starter cut relay.
Printed in Taiwan Audiovox Corp., 150 Marcus Blvd. Hauppauge, N.Y. 11788 Form No. 128-4515 + FACTORY REMOTE KEYLESS ENTRY MODULE + TYPIC.
An important point after buying a device Q-Logic APS-30 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Q-Logic APS-30 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Q-Logic APS-30 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Q-Logic APS-30 you will learn all the available features of the product, as well as information on its operation. The information that you get Q-Logic APS-30 will certainly help you make a decision on the purchase.
If you already are a holder of Q-Logic APS-30, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Q-Logic APS-30.
However, one of the most important roles played by the user manual is to help in solving problems with Q-Logic APS-30. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Q-Logic APS-30 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
