Instruction/ maintenance manual of the product QT17DVR4C Q-See
Go to page of 10
4 CH DVR Quick Installa tion Guide MODEL Q T17D VR4C V ersion: 6214C-P01.010 P ackage Con tents: 1. 1-17" TFT w/built-in 4 Channel MPEG4 DVR 2. 4 - CCD Out door Night Vision Cameras 3. 1- Remote control 4. 1- Po wer Cable 5. 4- BNC Cables (60 foot) 6.
Installation: 1. Attach the camera to the BNC connector and the pow er connection. Line up the slots on the yellow BNC c onnector (1) with the tabs on the grey connector(2), then push in and turn the head on the yellow connector clockwise to lock it in place .
2. Mak e sure the Hard Drive (1) is in the ba y (2) and locked. 4. After you attach all 4 cameras you will see quad screen on the Monitor 3. Plug the DVR power cord in to the bottom connector on the back of the DVR (1) 1.
T o Rec ord With Y our DVR : There are 3 modes f or recor ding . 1. Manual recording: Push the REC ORD button. It will record all the time until you st op it by pushing the REC ORD button again. 2. Motion Detec tion Recording: This will rec ord only when there is a Motion in fron t of the camera.
T o Set Up Time Schedule Recor ding: Use the Remote C ontrol and push SETUP and f ollow the instruction below : 1. Selec t "W ork Set" using the directional arrows and hit ENTER. 2. Use the directional arrows to select "Setup" and hit ENTER 3.
T o Pla yback the Recording: NO TE: Recording will not be interrupted while y ou are in Playback mode . 1. Using the remote contr ol, push CHECK Select "All Record" and hit the ENTER button.
T o Back Up the files: Y ou can use the USB cable and connect it direc tly from DVR to USB por t on the PC and either copy it y our PC hard drive or pla y it back on your PC 1. Push SETUP on the romote c ontrol Use the directional arrows to select "Basic Set".
T o Monitor the C amera on a Remot e C omputer: Here is the connection diagram: T o monitor your camera on a remote comput er you need to f orward your IP por t to the remote c omputer . There are instr uctions on how to do this on the website http://www .
T o Install the D VR6214 Remote Clien t Progr am : 1. Inser t the Remote Client Pr ogram CD into the CD/DVD-ROM drive on the comput er 2. Double click on the QT17DVR4C folder 3. Double click on the Remote Client Progr am icon 4. Click on "Next" 5.
Y ou can also connect to the DVR using the Internet Explorer web browser b y typing your W AN IP & the W eb por t from the Network Set ( EX: http://75.
An important point after buying a device Q-See QT17DVR4C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Q-See QT17DVR4C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Q-See QT17DVR4C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Q-See QT17DVR4C you will learn all the available features of the product, as well as information on its operation. The information that you get Q-See QT17DVR4C will certainly help you make a decision on the purchase.
If you already are a holder of Q-See QT17DVR4C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Q-See QT17DVR4C.
However, one of the most important roles played by the user manual is to help in solving problems with Q-See QT17DVR4C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Q-See QT17DVR4C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
