Instruction/ maintenance manual of the product Modbus Interface T-3 Raypak
Go to page of 2
T -3 MODBUS INTERF ACE B6000 BMS Modbus System Control Interface The T -3 Modbus Interface provides certified compatibility for data sharing and program access between the Raypak B6000 Boiler Management System and a host of other Building Manage- ment Systems.
T -3 Modbus Interface Interface Board Certified Modbus Compatibility ProSoft Series 1500 T ranslator RS-485 to N2 Gateway T ransfer Rate: 9600 Baud Read/Write Attributes Analog/Binary T otal B6000 BMS.
An important point after buying a device Raypak Modbus Interface T-3 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Raypak Modbus Interface T-3 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Raypak Modbus Interface T-3 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Raypak Modbus Interface T-3 you will learn all the available features of the product, as well as information on its operation. The information that you get Raypak Modbus Interface T-3 will certainly help you make a decision on the purchase.
If you already are a holder of Raypak Modbus Interface T-3, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Raypak Modbus Interface T-3.
However, one of the most important roles played by the user manual is to help in solving problems with Raypak Modbus Interface T-3. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Raypak Modbus Interface T-3 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
