Instruction/ maintenance manual of the product REG10J0052-0200 Renesas
Go to page of 20
REG10J0052-0200 D007133_1 1 Renesas Starter Kit Ethernet & USB Application Board User's Manual RENESAS ST ARTER KIT Rev .2.00 Renesas T echnology Europe Ltd.
T able of Content s Chapter 1. Preface .................................................................................................................................................. 3 Chapter 2. Purpose ............................................
Chapter 1. Preface Cautions This document may be, wholly or partially, subject to change without notice. All rights reserved. Duplication of this document, either in w hole or part is prohibited without the written permission of Rene sas Technology Europe Limited.
Chapter 2.Purpose This RSK Application Board is an evaluation tool for using Renesas microcontrollers with Ethernet and USB interfaces. It is use d in conjunction with the RSK for the microcontroller to be evaluated. Features include: • Mounting connections to allow RSK to be added to top of board.
Chapter 3.Board Layout 3.1.Component References The following diagram shows the component references for the board. Figure 3-1: Component Refer ences 5.
3.2.Board Component functions The following diagram the shows the functions of the components on the board. J2 JA5 JA1 JA6 JA2 Application Board Interface Application Board Interface JA3 J1 J4 USB Min.
3.3.Board Dimensions The following diagram gives the board dimensions and connector positions. All through hole connect ors are on a common 0.1” grid for easy interfacing.
Chapter 4.User Circuitry 4.1.Fitting the Target RSK to the RSK application board The board is supplied with 2x 24 way socket s, 2x 26 way sockets and 1 x 50 way socket. These should be soldered on the underside of the host RSK in JA1, JA2, JA5, JA 6 and JA3 positions.
A[7:1] CSn,W Rn Data 10ns 5ns 5ns 35ns 5ns Valid Figure 4-2: Ethernet controller write timing The Ethernet controller can drive two interrupt s. IRQ0 is the IRQ from the Ethernet controller .
A[17:1] CSn,RDn Data 35ns 0ns 5ns 40ns 5ns Valid Figure 4-3: USB controller read timing A[17:1] CSn,W Rn Data 8ns 5ns 5ns 20ns 5ns Valid Figure 4-4: USB controller wri te timing The ISP1761 controller can drive two interrupt s. IRQ1 is the HC_IRQ from the ISP1761 controller .
4.4.SRAM The board is provided with 512 kilobytes of st atic RAM arranged as 256k x 16 bit words. This RAM is byte addressable, pr ovided the host RS K support s this. The chip select use d for th e RAM is CS3 which is on JA3 pin 45. Please note the timing.
4.5.Option Links Table 4-1 below describes the function of the option links contai ned on this CPU board. The default configuration is indicated by BOLD text.
Chapter 5.Headers 5.1.Application Headers This information is supplied for reference. On ly pins marked are connected on th is board. These connections are not level translated. T able 5-1 and below T able 5-2 show the standard application header connections.
JA2 Pin Generic Header Name CPU board Signal Name Pin Header Name CPU board Signal Name 1 Open drain RESn 2 External Clock Input EXTAL 3 Open drain NMIn 4 Regulated Supply 1 Vss1 5 Open drain output W.
JA6 Pin Generic Header Name CPU board Signal Name Pin Header Name CPU board Signal Name 1 DMA DREQ 2 DMA DACK 3 DMA TEND 4 Standby (Open drain) STBYn 5 Host Serial SCIdTX RS232TX 6 Host Serial SCIdRX .
T able 5-5 below shows the Memory Expansion connections These connections support 5 to 3.3V level translation. JA3 Pin Generic Header Name Signal Name Pin Header Name Signal Name 1 A(0) A(0) 2 A(1) A(.
Chapter 6.Code Development RSKs with appropriate connections will include suitable samp le software to drive the interfaces on this board. 17.
Chapter 7.Additional Information For details on how to use High-performance Embedded Workshop (HEW), refer to the HEW man ual available on the CD or from the web site. Online technical support and information is available at: http://www.renesas.com/renesas_starter_kits T echnical Contact Details America: techsupport.
Renesas S tarter Kit Ethernet & USB Application Board User's Ma nual Publication Date Rev.2.00 17.Jan.2008 Published by: Renesas T echnology Europe Ltd. Duke’s Meadow , Millboard Road, Bourne End Buckinghamshire SL8 5F H, United King dom ©2007 Renesas T echn ology Euro pe and Renes as Solutions C orp.
Renesas S tarter Ethernet & USB Application Board User's Manual Renesas T echnology Europe Ltd. Duke’s Meadow , Millboard Road, Bourne End Buckinghamshire SL8 5F H, United King dom.
An important point after buying a device Renesas REG10J0052-0200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Renesas REG10J0052-0200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Renesas REG10J0052-0200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Renesas REG10J0052-0200 you will learn all the available features of the product, as well as information on its operation. The information that you get Renesas REG10J0052-0200 will certainly help you make a decision on the purchase.
If you already are a holder of Renesas REG10J0052-0200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Renesas REG10J0052-0200.
However, one of the most important roles played by the user manual is to help in solving problems with Renesas REG10J0052-0200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Renesas REG10J0052-0200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center