Instruction/ maintenance manual of the product FGS397X Roper
Go to page of 16
UGRiiiid CareGuide ROPER’” -. EzoIneAppliances FGS397X Thank you for choosing a Roper appliance. This Use and Care Guide will help you operate and mainta.in your new, quality- built Roper range. Keep this Use end Care Guide in a safe place for future reference.
Important Safety Instructions Gas ranges have been thoroughly tested for safe and efficient operation. However, as with any appliance, there are specific installation and safety precautions which must be followed to ensure safe and satisfactory operation.
if available, a multipurpose dry chemical or foam-type extinguisher. 18. Never leave surface burners unattended at high heat settings. A boil-over could result and cause smoking and greasy spill-overs that may ignite. 19. Make sure surface burners are off when you are finished, and when you are not watching.
Using Your Range Surface burner marker Right rear I control knob Right uont control knob Left koit control knob L&rear control knob Using the surface burners Pushfnandturn Control knobs must be pushed in, then turned to the LlTE position. The clicking sound is the ignition sparking.
Time/Temp Set Kuob Once you’ve pushed a command button to tell the oven what you want it to do, you’lI use the Time/remp Set Knob to set a temperature or time. Turning the Time/remp Set Knob clockwise increases the number on the display. Turning the Time/remp Set Knob counterclockwise decreases the number on the display.
Broiling Broiling tips . Use the broiler pan and grid for broiling. They are designed to dram excess liquid and fat away from the cooking surface to help prevent spatter, smoke or fire. . If you broil small quantities, you may want to use a small broiler pan.
Using the electronic oven control The electronic oven control will turn the oven on and off at times you set . . . even when you are not around. Automatic baking/roasting is ideal for foods which do not require a preheated oven, such as meats and casseroles.
The oven vent Hot air and moisture escape from the oven through a vent located under the backguard. The vent is needed for air circulation. Do not block the vent. Poor baking will result. Burn Hazard When the oven is ON, pans and pan handles left near the oven vent can become hot enough to burn the user and to melt plastics.
Caring For Your Range Bum, Electrical Shock, Fire And Explosion Hazard .Make sure all controls are OFF and the range is wol before cIeaning. . Do not use oven cleaners, bleach or rust removers. . Do not use gasoline or other flammable liquids or vapors to clean this or any other appliance.
9. Turn the burner on to determine if it wik light. If the burner does not light after cleaning, contact an authorized RopetiM service technician. Do not service the sealed burner yourself. 9. The bottom area of the surface burner grate is not covered by porcelain enamel and therefore should be dried thoroughly to prevent rusting of the prongs.
Setting the controls 6. After the self-Cleaning cycle is completed, the CLEAN indicator will go off and the time-of-day will show in the large display. 1. Make sure the Clock is set to the correct time of day. (See “Setting the clock” on page 5.) 2.
Burn And Electrical Shock Hazard Make sure all controls are OFF and the range is cool before cl-g. Failure to do so fan result in burns or electrical shock. PART WHAT TO USE HOW TO CLEAN Exterior surfaces (other Warm, soapy water and a soft n Wipe off regularly when range is COOL than control panel) cloth.
The oven light The oven light will come on when you push the Oven Light Switch on the control panel. Push the switch again to turn off the light. Ektrical Shock And Personal Injury Hazard n Make sum oven and light bulb are cool and power to the oven llm been turned off before repking the light bulb.
Before You Call For Service If you are having an operating problem, check the chart to see what the cause might be before you call for assistance. OPERATING PROBLEM Nothing operates. Oven will not operate. CHECK IF m Range is properly connected to gas and electrical supplies.
OPERATING PROBLEM Control knob(s) will not CHECK IF WHATTODO n YOU pushed in knob(s) before trying to n Push in knob(s) before turning. turn. If the Self-Cleaning cycle will not operate. Cooking results are not what you expected . The clock shows the correct time of day.
LIMITED WARRANTY ZEEE’. HomeAppUances LENGTH OF WARRANTY (From date of purchase) PRODUCTS COVERED WHAT WE WILL PAY FOR FULL ONE YEAR WARRANTY All Roper Appliances Replacement parts and repair labor to correct defects in materials or workmanship.
An important point after buying a device Roper FGS397X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Roper FGS397X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Roper FGS397X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Roper FGS397X you will learn all the available features of the product, as well as information on its operation. The information that you get Roper FGS397X will certainly help you make a decision on the purchase.
If you already are a holder of Roper FGS397X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Roper FGS397X.
However, one of the most important roles played by the user manual is to help in solving problems with Roper FGS397X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Roper FGS397X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
