Instruction/ maintenance manual of the product MM56A Audiovox
Go to page of 12
128-6544 1 of 12 Released: 02-11-04 Owner ’ s Manual Color TFT L CD Monitor MM56A.
128-6544 2 of 12 EXPLANA TION OF GRAPHIC SYMBOLS W ARNING: TO PREVENT FIRE OR ELECTRIC SHOCK HAZARD, DO NOT OPEN CAUTION: 1. This product is designed to operate with a 12 volt, negative ground battery system. 2. Disconnect the ground wire from the battery terminal before connect- ing the electrical system.
128-6544 3 of 12 A. Precaution: 1. Before installation, verify that it will not damage electrical wires, fuel lines, brake lines, hoses, exhaust system components or any other items that will impair the operation of the vehicle. 2. Ensure the cable has already been pulled through the supporting pipe before installing the base into the headrest.
128-6544 4 of 12 4 B. Installation: Front View T op View 1. Installation will vary from vehicle to vehicle, as headrests in vehicles are not standard. 2.
128-6544 5 of 12 1 ) Remove the headrest from the vehicle for easi- est installation. 2) Lay headrest on a flat sur- face. 3) Center trim collar on head- rest as shown. NOTE: Depending on the angle of the headrest, the T rim Ring and housing may be mounted upside down.
128-6544 6 of 12 9) Using your fingers, tear the foam out of the headrest leav- ing a recess where the shell will be inserted. NOTE: At this point you will need to install the harness up through the area into the recess. It may be help- ful to follow one of the posts and tie wrap it to the post for restraint.
128-6544 7 of 12 1 1) Guide the cable through the side opening of the Mounting Tray and plug it into the Monitor . Make sure the connector locks into place. In- sert the Monitor into the Mount- ing T ray and secure the cable using tie wraps or screws 12) T urn the Monitor around and in- sert it into the Mounting T ray housing.
128-6544 8 of 12 8 C. Controls/Indicators/Connectors: Front View 2. Earphone Jack 3. Color Adjust Up/Down Buttons 4. Brightness Adjust Up/Down Buttons 5.
128-6544 9 of 12 Exploded V i ew 9 6. DIN Connectors 7. Signal Cable 8. Black Wire (Ground) 9. Red Wire (+12 Vdc Input) 10. White RCA Jack (Audio Input L) 1 1.
128-6544 10 of 12 10 D. Operation: 1. Connect the red monitor power input wire (9) to a DC power source (Red = +12 VDC), and the Black wire (8) to ground. 2. Connect the external video source output signal (from VCP , DVD, TV etc.) to the VIDEO IN jack (12).
128-6544 11 of 12 11 THIS P AGE LEFT BLANK INTENTIONALL Y.
128-6544 12 of 12 E. Specifications: Display 5.6” Color TFT LCD Resolution 960 (W) x 234 (H) Lines Active Area 1 14.2 (W) x 83.5 (H) mm Backlight CCFL Input Signal NTSC/PAL(auto-switch) Lamp Life 10,000 Hours Audio Specifications: Input Impedance 10 K-Ohms Audio Output 0.
An important point after buying a device Audiovox MM56A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox MM56A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox MM56A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox MM56A you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox MM56A will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox MM56A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox MM56A.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox MM56A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox MM56A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
