Instruction/ maintenance manual of the product PS-20 RTS
Go to page of 2
PS-20 Power Supply The RTS PS-20 is the new agship of a complete independent TW power supply . The PS-20 features two- and four-channel operation, RTS monitoring, two-channel program input, audio linking, and three-mode operation: R TS 2-channel, RTS 4-chan - nel and Clear-Com mode.
PS-20 Specications General Input V oltage: 90 to 264 V AC, 50 to 60 Hz Output V oltage: 28 VDC to 32 VDC Output Current: 2.00 Amps Maximum per channel T ermination Impedance: Selectable 200 Ω / 400 Ω 1.
An important point after buying a device RTS PS-20 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought RTS PS-20 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data RTS PS-20 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, RTS PS-20 you will learn all the available features of the product, as well as information on its operation. The information that you get RTS PS-20 will certainly help you make a decision on the purchase.
If you already are a holder of RTS PS-20, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime RTS PS-20.
However, one of the most important roles played by the user manual is to help in solving problems with RTS PS-20. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device RTS PS-20 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
