Instruction/ maintenance manual of the product User Station MCE-325 RTS
Go to page of 2
MCE-325 User Station The MCE-325 is a four-channel, programmable intercom station. It may be used as a headset station or , with the addition of the MCS-325 Modular Speaker , as a speaker station. It may be mounted in a console or equipment rack via optional mounting kits.
MCE-325 Specications General Bridging Impedance (to line) 10,000 Ω typical Noise Contribution to 200 Ω Line -90 dBu Call Signal Frequency 20 kHz, crystal controlled T alk-off Frequency 24 kHz, .
An important point after buying a device RTS User Station MCE-325 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought RTS User Station MCE-325 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data RTS User Station MCE-325 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, RTS User Station MCE-325 you will learn all the available features of the product, as well as information on its operation. The information that you get RTS User Station MCE-325 will certainly help you make a decision on the purchase.
If you already are a holder of RTS User Station MCE-325, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime RTS User Station MCE-325.
However, one of the most important roles played by the user manual is to help in solving problems with RTS User Station MCE-325. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device RTS User Station MCE-325 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
