Instruction/ maintenance manual of the product PX300 Audiovox
Go to page of 12
Owner's Owner's Owner's Owner's Owner's Manual Manual Manual Manual Manual PX-300 2/3-W ay Active Crossover BASS BOOST +B dB @ 45Hz ON OFF 30Hz 30Hz .
INDEX Specifications ................................................................................1 Installation Instructions .................................................................2 Wiring Instructions ................................
HIGH PERFORMANCE 2/3-WAY ACTIVE CROSSOVER This unit has been designed to provide high quality performance with a minimum of maintenance. However, it's performance will only be as good as the care and quality of components with which it is installed.
INSTALLATION INSTRUCTIONS 1. Select a mounting area where the crossover will be accessible for occasional adjustment of control settings. 2. Place the crossover on the mounting surface and mark the locations of the four mounting holes as shown in the illustration.
-3- WIRING INSTRUCTIONS The wiring of your crossover will depend on the system and speakers you are using but will either be a 2-way (bass and midrange /high) or 3- way (bass, midrange and high) application using 2 or 4 channels of input from the car stereo.
CAR STEREO -4- 2-WAY SYSTEM WIRING USING 2 CHANNEL INPUT LOW-LEVEL RCA OUTPUTS RIGHT AUTO-ANTENNA LEAD LEFT WOOFER EXISTING SCREW OR BOLT CLEAN PAINT, RUST, DIRT OR GREASE FROM AREA FOR GOOD CONNE.
CAR STEREO -4- 2-WAY SYSTEM WIRING USING 4 CHANNEL INPUT LOW-LEVEL RCA OUTPUTS AUTO-ANTENNA LEAD LEFT WOOFER EXISTING SCREW OR BOLT CLEAN PAINT, RUST, DIRT OR GREASE FROM AREA FOR GOOD CONNECTION .
CAR STEREO -6- 3-WAY SYSTEM WIRING USING 2 CHANNEL INPUT LOW-LEVEL RCA OUTPUTS RIGHT AUTO-ANTENNA LEAD LEFT WOOFER EXISTING SCREW OR BOLT CLEAN PAINT, RUST, DIRT OR GREASE FROM AREA FOR GOOD CONNE.
CAR STEREO -7- 3-WAY SYSTEM WIRING USING 4 CHANNEL INPUT LOW-LEVEL RCA OUTPUTS AUTO-ANTENNA LEAD LEFT WOOFER EXISTING SCREW OR BOLT CLEAN PAINT, RUST, DIRT OR GREASE FROM AREA FOR GOOD CONNECTION .
-8- OPERATION 1 POWER INDICATOR The Power Indicator LED will illuminate to indicate that the unit is connected to the battery and that the Remote Turn-On terminal is receiving +12 volts, thus turning on the crossover. 2 INPUT SELECTOR This switch is used to select the inputs of the audio signal to the crossover.
-9- 8 MIDRANGE LEVEL CONTROL This control is used to adjust the output level from the “MIDRANGE OUTPUT” jacks. Set the control to the “MIN” position and slowly adjust it until the desired level of midrange output is achieved for the amplifier/ speaker system being used.
AUDIOVOX CORPORATION (the Company) warrants to the original retail purchaser of this product that should this product or any pa rt thereof, under normal use and conditions, be proven defective in material or workmanship within 12 months from the date of orig inal purchase, such defect(s) will be repaired or replaced with new or reconditioned product (at the Company's option) without charge for parts and repair labor.
An important point after buying a device Audiovox PX300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Audiovox PX300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Audiovox PX300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Audiovox PX300 you will learn all the available features of the product, as well as information on its operation. The information that you get Audiovox PX300 will certainly help you make a decision on the purchase.
If you already are a holder of Audiovox PX300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Audiovox PX300.
However, one of the most important roles played by the user manual is to help in solving problems with Audiovox PX300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Audiovox PX300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center