Instruction/ maintenance manual of the product S24C770T Samsung
Go to page of 60
T ouchscr een monitor User Manual The color and the appearance may diff er depending on the product, and the specifications are subject to change without prior notice to improv e the per formance.
2 T able of con tents Before U sing the Pr oduc t Cop yright 4 Securing the Installation Space 5 Precautions f or storage 5 Safety Precautions 5 Symbols 5 Cleaning 6 Electricity and S afety 6 Installa.
3 T able of con tents In A V mode 36 Configuring the HDMI black lev el 37 Enabling/disabling the off timer 37 Enabling PC or A V mode 38 Adjusting the v olume 38 T roubleshooting Guide Requirements Before C ontacting Samsung Customer Service C enter 39 T esting the Product 39 Checking the Resolution and Frequency 39 Check the followings .
4 C opyright The contents of this manual are subject to change without notice to impr ove quality. ⓒ 2013 Samsung Electronics Samsung Electronics owns the copyright for this manual . Use or reproduction of this manual in parts or entirety without the authorization of Samsung Elec tronics is prohibit ed.
5 Securing the Installation Space Ensure some space around the pr oduct for ventilation. An internal temperature rise may cause fire and damage the product. Be sure to allow the amount of space as shown belo w or greater when installing the product. ― The exterior may differ depending on the product.
6 Cleaning ― Exercise car e when cleaning as the panel and exterior of advanced LCDs are easily scrat ched. ― T ak e the following steps when cleaning . ― The following images ar e for ref erence only . Real-life situations may differ fr om what is shown in the images.
7 Do not bend or pull the power cord with f orce. Be careful not to lea ve the power cord under a hea vy objec t. • Damage to the cord may r esult in a fire or electric shock . Do not place the power cord or pr oduct near heat sources. • A fire or electric shock may result.
8 ! Keep the plastic pack aging out of the reach of children. • Children may suff ocate. Do not install the product on an unstable or vibrating sur face (insecure shelf , sloped sur face, etc .) • The product may fall and become damaged and/or cause an injury.
9 Operation W arning There is a high voltage inside the pr oduct. Never disassemble, repair or modify the product yourself . • A fire or electric shock may result. • Contact Samsung Customer Service Center for repairs. ! Before mo ving the product, turn off the power switch and disconnect the power cable and all other connected cables.
10 ! Do not use or keep combustible spray or an inflammable substance near the product. • An explosion or fire may r esult. Ensure the vents ar e not blocked by tablecloths or cur tains.
11 ! Rest your eyes for mor e than 5 minutes for every 1 hour of product use. • Eye fatigue will be relieved . Do not touch the screen when the product has been turned on for an extended period of time as it will become hot. ! Store small accessories out of the reach of childr en.
12 C orrect posture to use the pr oduc t Use the product in the correct posture as follows: • Straighten your back. • Allow a distance of 45 to 50cm between your eye and the scr een, and look slightly downward at the screen. Keep your eyes directly in front of the scr een.
13 P repar ations Chapter 02 Checking the Cont ents Removing the P ackaging ― The following images ar e for ref erence only . Real-life situations may differ fr om what is shown in the images. 1 Open the packaging box. Be careful not to damage the product when you open the packaging with a sharp instrument.
14 - Contact the vendor where you purchased the product if any components are missing. - The appearance of the components and items sold separately may diff er from the image shown. - Components may vary depending on the country. Componen ts Quick setup guide W arrant y card (Not available in some locations) User manual P ower cord ( P.
15 P ar ts F ront Butt ons A Key guide ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to impr ove quality. ― Pr ess one of the four buttons, other than the pow er button, found at the bottom right front of the pr oduct.
16 Reverse Side HDMI IN 2 HDMI IN 1 DC 1 4V USB (PC) ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to impr ove quality. Po r t Description DC 1 4V Connect to a DC power adapter . HDMI IN 1 HDMI IN 2 Connect to a source device using an HDMI or HDMI-DVI cable.
17 Adjusting the P roduct Tilt The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to impr ove quality . 3° ~ 5° 53° ~ 57° • Y ou can adjust the product tilt. • Grasp the top center of the product with your hand , then push or pull the product to tilt.
18 Anti-theft Lock ― An anti-theft lock allows you to use the product securely even in public places . ― The locking device shape and lock ing method depend on the manufacturer . Refer to the user guide provided with y our anti-theft lock ing device for details.
19 U sing Magic T une T ouch Chapter 03 About MagicT une T ouch MagicT une T ouch is designed to control monitors. The program allows you to conv eniently control a monitor to adjust the screen brightness or color from a comput er , without the need to use buttons on the monitor .
20 Installing/Uninstalling Magic T une T ouch ( W indow s) Installation 1 Run the MagicT une T ouch installer program in the install CD. ― If a soft ware install popup does not appear on the main screen, go to CD -ROM AutoPla y Manual MagicT uneT ouch and run the MagicT une T ouch executable file.
21 U sing a touchscr een monitor Control a PC by tapping the scr een instead of using an input device such as a keyboard or mouse. Chapter 04 T ouchscr een monitor Control a PC by tapping the scr een instead of using an input device such as a keyboard or mouse.
22 C onnec ting the touchscreen monit or C onnec ting to a PC 1 Connect a PC to the product using an HDMI or HDMI-DVI cable. HDMI IN 1 , HDMI IN 2 HDMI IN 1 , HDMI IN 2 or 2 Connect the DC power adapter to the pr oduct and power outlet.
23 C onguring the touchscreen monit or settings T o properly use the touch function of the product in Windo ws, go to T ablet PC Settings and calibrate the product. ― F irst connect the touchscreen monitor before configuring the f ollowing settings.
24 Ac cessing the calibration menu fr om MagicT une T ouch ― The following method is applicable f or Windows 8. The same method applies to both Windows 7 and Windows 8. 1 Run MagicT une T ouch . 2 Select T ouch Calibration from the Options tab. Select Start .
25 Calibr ation ― Instructions below are for Windows 8. The same method applies to both Windows 7 and Windows 8. ― After changing the screen siz e or PC/A V mode using the OSD menu, the monitor may need to be calibrated again. ― In the occurrence of an error during calibration, go to T ablet PC S ettings the Display tab.
26 3 Select the product from Display under Display options . Next, select Calibrate . 4 Perform calibration following the onscr een instructions displayed as shown in the image. To provide calibration samples, tap the crosshair each time that it appears on the screen.
27 C onguring the touchscreen monit or settings from a Mac T o use the touch function of the product from a Mac computer , make sure to install the corresponding program as instructed below .
28 C ontrolling the scr een Basic touch functions The control method is the same as when using a mouse Ta p T o selec t a function or menu item, tap the selection lightly on the screen. This is similar to clicking with a mouse. Dra g T o move when viewing a webpage, map or gallery, drag in the desired dir ection.
29 Flick T o move to the previous or next page when viewing a webpage or galler y , flick with your finger as shown in the image. Zoom in/out T o zoom in or out when viewing a webpage, map or gallery, pinch with your fingers as shown in the image. Notes • T o increase the touch input accuracy, enlarge the f ont or icons.
30 C onnec ting and Using a Sour ce De vice Chapter 05 Befor e Connecting Check the following bef ore you connect this product with other devices. HDMI IN 2 HDMI IN 1 DC 1 4V USB (PC) Pr e - connec tion Checkpoints ― Before connecting a source device , read the user manual provided with it.
31 C onnec tion Using an HDMI C able There are sev eral methods available to connect a source device to the product. Select the appropriate method according to the envir onment where you are using the product. ― Connecting par ts may differ in diff erent products.
32 C onnec tion Using an HDMI-DVI C able There are sev eral methods available to connect a source device to the product. Select the appropriate method according to the envir onment where you are using the product. ― Connecting par ts may differ in diff erent products.
33 C onnec ting to an A udio Sy stem C onnec ting the P ow er Connect the power cable to the DC power adapt er . Next, connec t the adapter to the product.
34 Changing the Resolution ― Adjust the resolution and r efresh rate in Control P anel on your PC to obtain optimum picture quality . ― The picture quality of TFT -L CDs may degrade if the optimum resolution is not selected. Changing the Resolution on Windo ws 7 Go to Contr ol Panel Display Screen Resolution , and change the resolution.
35 OSD menu The OSD menu is not available while MagicT une T ouch is running. Chapter 06 Exiting from the menu Exit fr om the OSD menu as follows. ― Pr ess one of the four buttons, other than the pow er button, found at the bottom right front of the pr oduct.
36 Changing the scr een size ― After changing the screen siz e, the monitor may need to be calibrated again. ― T o calibrate the monitor again, refer to "C alibration" on page 25 . In PC mode In A V mode Change the screen size as f ollows.
37 C onguring the HDMI black level - This menu is available only when a source device is connected via HDMI. - This menu may not be compatible with some source devices. If a DVD player or set-top box is connected to the product via an HDMI cable, the contrast and color ma y degrade and the screen may darken.
38 Enabling PC or A V mode - After changing the PC/A V mode, the monitor may need t o be calibrated again. - T o calibrate the monitor again, refer to "Calibration" on page 25 . Enable PC or A V mode according to the sour ce device connected to the product.
39 T r oubleshooting Guide Chapter 07 Requirements Bef ore C ontacting S amsung C ustomer Ser vice C enter Before calling Samsung Cust omer Ser vice Center , test your product as f ollows. If the problem persists, contact Samsung Customer Service Center .
40 Check the follo wings. Installation issue (PC mode) The screen keeps swit ching on and o. Check the cable connection between the product and PC, and ensure the connection is secure. Blank spaces are f ound on all four sides of the screen when an HDMI or HDMI-DVI cable is connected to the product and PC.
41 Screen issue The screen is not clear . The screen is blurry . Check the cable connection to the product. Remove any accessories (video extension cable, etc) and try again. Set the resolution and frequency to the recommended level . The screen appears unstable and shaky .
42 T ouch func tion issues The touch function does not work. Make sure not to use an object other than your finger when tapping the screen. Make sure the screen or your finger is not wet. Make sure you are not wearing a glove and y our finger is not dir ty.
43 Q & A Question Answer What is the minimum touch ar ea? Ensure the touch ar ea is at least 8mm in diameter when tapping with your finger . How can I change the frequency? Set the frequency on your graphics card.
44 1 Size 2 Display area H V 3 Dimensions ( W x H x D) W D H General Model Name S24C770 Panel Siz e 24 Class (24 inches / 60.96 cm) Display area 531.36 mm (H) x 298.89 mm ( V ) / 20.9 inches (H) x 11.8 inches ( V ) Pix el Pitch 276.75(per one triad) mm (H) x 276.
45 Model Name S24C770 Synchronization Horiz ontal Frequency 30 ~ 81 kHz V er tical Fr equency 56 ~ 75 Hz Resolution Optimum resolution 1920 x 1080 @ 60 Hz Maximum resolution 1920 x 1080 @ 60 Hz Maximum Pixel C lock 148.5 MHz Po wer Supply This product uses 100 to 240V .
46 P owerSa ver The power-sa ving function of this product reduces power consumption by switching off the screen and changing the color of the po wer LED if the product is not used for a specified period of time. The power is not turned off in power-saving mode.
47 Pr eset T iming M odes - This product can be set to only one resolution for each scr een size to obtain the optimum picture quality due to the nature of the panel. Using a r esolution other than the specified resolution may degrade the picture quality.
48 Resolution Horizontal F requency (kHz) V ertical Frequency (Hz) Pix el Clock (MHz) Sync P olarity (H/V ) VESA, 1280 x 720 45.000 60.000 74.250 +/+ VESA, 1280 x 800 49.702 59.810 83.500 -/+ VESA, 1280 x 1024 63.981 60.020 108.000 +/+ VESA, 1280 x 1024 79.
49 Appendix Chapter 09 C ontac t SAMSUNG WORLD WIDE ― If you have any questions or comments relating t o Samsung products, please contact the SAMSUNG customer care center . NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung .com CANADA 1-800-SAMSUNG (726-7864) http://www.
50 LA TIN AMERICA COST A RICA 0-800-507-7267 http://www.samsung .com/latin (Spanish) http://www.samsung .com/latin_en (English) DOMINICA 1-800-751-2676 http://www.samsung .com/latin (Spanish) http://www.samsung .com/latin_en (English) ECU ADOR 1-800-10-7267 http://www.
51 EUROPE A USTRIA 0810 - SAMSUNG (7267864, € 0.07/min) http://www.samsung .com BEL GIUM 02-201-24-18 http://www.samsung .com/be (Dutch) http://www.samsung .com/be_fr (Fr ench) BOSNIA 05 133 1999 http://www.samsung .com BUL GARIA 07001 33 11, normal tariff http://www.
52 EUROPE IT ALIA 800-SAMSUNG (726-7864) http://www.samsung .com LA T VIA 8000-7267 http://www.samsung .com LITHU ANIA 8-800-77777 http://www.samsung .com L UXEMBURG 261 03 710 http://www.samsung .com MONTENEGRO 020 405 888 http://www.samsung .com NETHERLANDS 0900-SAMSUNG (0900-7267864) (€ 0,10/Min) http://www.
53 CIS ARMENIA 0-800-05-555 http://www.samsung .com AZERBAIJAN 088-55-55-555 http://www.samsung .com BELARUS 810-800-500-55-500 http://www.samsung .com GEORGIA 0-800-555-555 http://www.samsung .com KAZAKHST AN 8-10-800-500-55-500 (GSM: 7799) http://www.
54 ASIA P ACIFIC INDIA 1800 1100 11 3030 8282 1800 3000 8282 1800 266 8282 http://www.samsung .com INDONESIA 0800-112-8888 021-5699-7777 http://www.samsung .com JAP AN 0120-327-527 http://www.samsung .com MALA YSIA 1800-88-9999 http://www.samsung .com NEW ZEALAND 0800 SAMSUNG (0800 726 786) http://www.
55 MIDDLE EAST BAHRAIN 8000-4726 http://www.samsung .com/ae (English) http://www.samsung .com/ae_ar (Arabic) EGYPT 08000-726786 http://www.samsung .com IRAN 021-8255 http://www.samsung .com JORDAN 800-22273 065777444 http://www.samsung .com KUW AIT 183-2255 http://ww w .
56 AFRICA GHANA 0800-10077 0302-200077 http://www.samsung .com KENY A 0800 545 545 http://www.samsung .com NAMIBIA 8197267864 http://www.samsung .com NIGERIA 0800-726-7864 http://www.samsung .com SENEGAL 800-00-0077 http://www.samsung .com SOUTH AFRICA 0860-SAMSUNG (726-7864) http://www.
57 Responsibility for the P ay Ser vice( Cost to C ustomers) ― When the ser vice is requested , in spite of in warranty, we may char ge you for a visit from a service technician in the following cases . Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc.
58 C orrect D isposal C orrect D isposal of This P roduct ( W aste Electrical & Electronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessor ies or literature indicates that the pr oduct and its electronic accessories (e.
59 License The terms HDMI and HDMI High-Definition Multimedia I nter face, and the HDMI Logo ar e trademarks or registered trademarks of HDMI Licensing LL C in the United States and other countries. Open Source Licence Notice In the case of using open source software, Open Source Licences are available on the pr oduct menu.
60 T erminology 480i / 480p / 720p / 1080i / 1080p ____ Each of the scanning rates above ref ers to the number of effective scanning lines that decides the screen resolution. The scanning rate may be indicated in i (interlaced) or p (progr essive), depending on the scanning method.
An important point after buying a device Samsung S24C770T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung S24C770T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung S24C770T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung S24C770T you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung S24C770T will certainly help you make a decision on the purchase.
If you already are a holder of Samsung S24C770T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung S24C770T.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung S24C770T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung S24C770T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
