Instruction/ maintenance manual of the product UQ07SBGE Samsung
Go to page of 28
SPLIT TYPE ROOM AIR CONDITIONER ( Cool and Heat ) E DB98-08237A(5) AQ07S8GE AQ07SBGE SH07ZS8 AQ09S8GE AQ09SBGE SH09ZS8 AQ12SBGE AQ12SGGB AQ12SGGE SH12ZSG AQ18S0GB AQ18S0GE SH18ZS0 AQ24S6GB AQT24S6GE S.
E- 2 Safety Precautions ◆ If the power supply cord of this air conditioner is damaged, it must be replaced by the manufacturer or its authorized service personnel only in order to avoid a safety hazard. W ARNING ◆ Do not attempt to install the air conditioner by yourself.
E- 3 Contents ◆ P REP ARING YOUR AIR CONDITIONER ■ Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 ■ View of the Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ■ Remote Control-Buttons and Display .
V iew of the Unit E- 4 The design and shape are subject to change according to the model. Indoor Unit Air filter (under the grille) Air flow blades (outlet) Air Inlet Remote Control Sensor On/Off swit.
SH30ZC1(C2)X E- 5 Air Inlet(Rear) Air Outlet Connection V alve (inside) Outdoor Unit UQ07S8GE SH07ZS8X UQ09S8GE SH09ZS8X Air Inlet(Rear) Air Outlet Connection V alve Outdoor Unit UQ07SBGE UQ09SBGE UQ1.
Remote Control - Buttons and Display Operating mode ( AUTO, COOL, DRY , F AN, HEA T) Remote control transmission indicator Mode selection button (AUTO, COOL, DR Y , F AN, HEA T) T urbo/Sleep mode sele.
G etting Started Y ou have just purchased a split type air conditioner and it has been installed by your installation specialist. Y our Owner’ s Instructions contains valuable infor mation on using your air conditioner . Please take the time to read it as it will help you take full advantage of the unit’ s features.
Inserting the Remote Control Batteries Push the battery cover on the rear of the remote control with your thumb in the direction of the arrow and remove it. Insert the two batteries, taking care to respect the polarities : ◆ + on the battery with + on the remote control.
Selecting the Automatic Operating Mode E- 9 Y ou can start the air conditioner in Automatic mode from your remote control. In the Automatic mode, the standard temperature and the optimum fan speed is selected automatically . Y ou can adjust the standard temperature but not the fan speed.
Cooling Y our Room 1 If necessary , press the (On/Of f) button. Result : ◆ The operation indicator on the indoor unit lights up. ◆ The air conditioner starts up in the mode selected when the unit was last used.
Heating Y our Room E- 11 Y ou must select the Heat mode if you wish to adjust the: ◆ Heating temperature ◆ Fan speed when heating 1 If necessary , press the (On/Of f) button. Result : ◆ The operation indicator on the indoor unit lights up. ◆ The air conditioner starts up in the mode selected when the unit was last used.
Changing the Room T emperature Quickly The T urbo cooling/heating function is used to cool or heat your room as quickly as possible. E E E E x x x x a a a a m m m m p p p p l l l l e e e e : Y ou have just come home and find that the room is very hot.
Removing Excess Humidity E- 13 If the atmosphere in your room is very humid or damp, you can remove excess humidity without lowering the room temperature too much. 1 If necessary , press the (On/Of f) button. Result : ◆ The operation indicator on the indoor unit lights up.
Airing Y our Room If the atmosphere in your room is stale, you can air the room using the Fan feature. 1 If necessary , press the (On/Of f) button. Result : ◆ The operation indicator on the indoor unit lights up. ◆ The air conditioner starts up in the mode selected when the unit was last used.
Selecting Energy Saving Mode If you wish to save energy when using your air conditioner , select the Energy saving mode with the Energy saving button. 3 Press the button. Result : ◆ The indoor unit beeps. ◆ The air conditioner runs in the Energy saving mode.
Adjusting the Air Flow Direction V ertically Depending on the position of the indoor unit on the wall of your room, you can adjust the position of the outer air flow blade on the bottom of the unit, thus increasing the efficiency of the air conditioner .
Adjusting the Air Flow Direction Horizontally There are two sets of inner air flow blades. Just as the outer air flow blade can be adjusted vertically , the inner blades can be adjusted horizontally . 1 Adjust each set of inner blades to the required position, by pushing or pulling them sideways.
Setting the On T imer If you want to turn on the air conditioner before the timer reaches the setting time, press the (ON/OFF) button. N N N N o o o o t t t t e e e e The On T imer enables you to switch on the air conditioner automatically after a given period of time.
Setting the Off Timer The Off T imer enables you to switch off the air conditioner automatically after a given period of time. Y ou can set the period of time from 30 minutes to 24 hours. T o set the operating time, press the button one or more times until the required time is displayed.
Setting the Sleep Timer The Sleep T imer can be used when you are cooling or heating your room to switch the air conditioner off automatically after a period of six hours. N N N N o o o o t t t t e e e e If you wish to switch the unit off at a specific time, refer to page 19.
Operating Recommendations Here are a few recommendations that you should follow when using your air conditioner . T opic Recommendation Heating performances The heat pump inside the air conditioner absorbs heat from outside air and brings it indoors. If the temperature of the outside air drops, the air conditioner will heat less.
T emperature and Humidity Ranges The following table indicates the temperature and humidity ranges within which the air conditioner can be used. If the air conditioner is used at... Then... High temperatures The automatic protection feature may be triggered and the air conditioner stopped.
Solving Common Problems Explanation/Solution ◆ Check that the breaker used for the air conditioner is switched on. ◆ Check that the operation indicator on the indoor unit is on; if necessary press the (On/Of f) button on the remote control. ◆ Check whether the TIMER indicator on the indoor unit is switched on.
Cleaning Y our Air Conditioner Cleaning Deodorizing and Bio-Green filters (Option) 3 W ash the filters with clean water , then dry them in the shade. 2 Pull out the deodorizing and Bio-Green filters. 1 Open the upper front grille by pulling right and left sides of the grille.
T echnical Specifications Model Indoor unit AQ07S8GE AQ07SBGE SH07ZS8 AQ09S8GE AQ09SBGE SH09ZS8 AQ12SBGE AQ12SGGE SH12ZSG AQ18S0GE SH18ZS0 AQT24S6GE SH24TS6 220-240V~, 50Hz AQ12SGGB AQ18S0GB AQ24S6GB .
E- 26 MEMO.
E- 27.
ELECTRONICS THIS AIR CONDITIONER IS MANUF ACTURED BY : Printed in Korea.
An important point after buying a device Samsung UQ07SBGE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Samsung UQ07SBGE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Samsung UQ07SBGE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Samsung UQ07SBGE you will learn all the available features of the product, as well as information on its operation. The information that you get Samsung UQ07SBGE will certainly help you make a decision on the purchase.
If you already are a holder of Samsung UQ07SBGE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Samsung UQ07SBGE.
However, one of the most important roles played by the user manual is to help in solving problems with Samsung UQ07SBGE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Samsung UQ07SBGE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
