Instruction/ maintenance manual of the product VISION MOUNT VMPO Sanus Systems
Go to page of 8
Assembly Instructions f or Model: VMPO Thank Y ou for your purchase of a Sanus Systems V ision Mount! The VMPO is designed to securely attach a Flat Panel LCD to a cabinet or an armoire. It will allow the ability to pull the TV out and swiv el. It can also be used with a VM200 for tilting LCDs or a VMPL50 for Plasmas.
TV Attachment Hardwar e: (4) M4 x 10 Bolt - p (4) M4 x 30 Bolt - q (4) M6 x 12 Bolt - r (4) M6 x 35 Bolt - s (4) M4 Lock W asher - t (4) M6 Lock W asher - u (4) M4 Spacer - v (4) M6 Spacer - w Step 1:.
Step 2: Attach Glides to Mounting Surface T o mount the Glides (k,l), insert a Button Head Bolt (a) through each indicated hole in the wood portion of the Glide, the Shelf you are mounting the VMPO to, a W asher (c), and finally thread a 1/4 20 Nut (b) onto the end.
Step 4: Attach T op Assembly to Glides Orient the Base (j) so that the 4 small holes face the front and the side with the long groov es faces down. Then orient the T op Assembly (m) so that the vertical tube is closer to the back. Insert a Furniture Bolt (g) through the T op Assembly , the Base, and finally thread it into the Glide (k,l).
Step 6: Adjust the height of the T op Assembly Using the Allen K ey (i), loosen the pin that is sho wn in the Detailed V ie w of Diagram 6. Once the Pin and the Nut are remov ed, raise or lower the free moving part of the T op Assembly (m) to the desired height and reinsert the Pin and the Nut into the appropriate hole.
Step 7: Attach Flat Panel LCD dir ectly to VMPO T o figure out the hardware needed to attach the VMPO directly to the TV , start by determining the diameter of the Bolt (M4 or M6) your TV requires by hand threading them into the threaded insert on the back of the TV .
If using a VM200 for tilt compatibility with flat panel LCD sets f ollow Step 8. Step 8: Attach the VM200 W all Plate to T op Assembly Insert a M8 Bolt (e) through the appropriate hole in the VM200 W all Plate, the T op Assembly (m), the M8 Lock W asher (f), and thread into a M8 Nut (d).
Sanus Systems 2221 Hwy 36 W est, Saint Paul, MN 55113 4.05.05 Customer Service: 800.359.5520. See complementary Sanus products at www .sanus.com If using a VMPL50 for tilt compatibility with a plasma set f ollow Step 9.
An important point after buying a device Sanus Systems VISION MOUNT VMPO (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sanus Systems VISION MOUNT VMPO yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sanus Systems VISION MOUNT VMPO - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sanus Systems VISION MOUNT VMPO you will learn all the available features of the product, as well as information on its operation. The information that you get Sanus Systems VISION MOUNT VMPO will certainly help you make a decision on the purchase.
If you already are a holder of Sanus Systems VISION MOUNT VMPO, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sanus Systems VISION MOUNT VMPO.
However, one of the most important roles played by the user manual is to help in solving problems with Sanus Systems VISION MOUNT VMPO. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sanus Systems VISION MOUNT VMPO along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
