Instruction/ maintenance manual of the product VWM-900 Sanyo
Go to page of 16
Please read this manual carefully before connecting your VCR and operating it for the first time. Keep the manual in a safe place for future reference.
IMPORT ANT COPYRIGHT INFORMA TION : Many television programs and films are copyrighted. In certain circumstances, copyright law may apply to private in-home video taping of copyrighted materials. FCC W ARNING: This equipment may generate or use radio fre- quency energy .
3 IMPORT ANT SAFETY INSTRUCTIONS 1. Read these instructions. - All these safety and oper- ating instructions should be read before the product is operated. 2. Keep these instructions. - The safety , operating and use instructions should be retained for future reference.
AUDIO LINE1(AUX1) R L IN IN OUT OUT ANT.IN VIDEO RF OUT VHF/UHF /CATV 4 CONTROL NAMES AND LOCA TIONS FRONT REMOTE CONTROL POWER Power Cord VIDEO IN/ AUDIO IN (L/R) JACKS CHANNEL ( V / v ) P AUSE/ STIL.
5 INST ALLA TION Placing your VCR on top of or under the TV receiver may result in interference on the TV screen when the VCR is on. If this occurs, move the VCR to a position beside the TV receiver .
6 ❶❷ ❸ ❹ ❺ ONSCREEN DISPLA Y (OSD) SETTING THE ONSCREEN DISPLA Y Some of these functions will be displayed every time the VCR is operated. The SETUP , clock setting, and timer recordings are accessed conveniently with Onscreen Menu Displays that lead you through each step.
This VCR is equipped with a frequency synthesized tuner capable of receiving up to 181 channels. These include VHF channels 2-13, UHF channels 14-69, and CA TV channels 1-125. PREP ARA TION • Connect the VCR to the desired type of antenna or cable TV system, as shown in ANTENNA TO VCR CONNECTIONS .
AUTO CLOCK SET 1 Press MENU and the MAIN menu will appear . 2 Press v or V to choose the CLOCK menu. Press ENTER and the CLOCK menu will appear. 3 Press V to choose AUTO CLOCK SET . Press b or B to choose ON. The Auto Clock Set feature is set to ON at the factory .
9 SETTING THE TVG ® (TVGuardian ® ) TVGuardian ® T echnology embedded into the VCR will filter foul language from pre-recorded movies which have CC (Closed Caption). TVGuardian reads the hidden sig- nals for closed captions, detects offensive language, momentarily mutes the sound, and displays alternate words and phrases.
10 NORMAL PLA YBACK PREP ARA TION • T urn on the TV . • Be sure the TV is set to the VCR Output Channel (CH 3 or 4). • If a direct VIDEO/AUDIO connection is made between the VCR and the TV , set the TV’s source selector to VIDEO. 1 Insert a prerecorded video cassette.
11 AUTO POWER SHUT -OFF FUNCTION This feature is especially helpful when you finish watching a tape. Press STOP , REW , and POWER . The VCR will rewind the tape and turn itself off automatically . 1. Press STOP when you finish watching a tape. 2. Press REW to rewind the tape.
12 10 Press V for SPEED. Press b or B to choose the desired tape speed (AUTO, SP , or SLP). Example : SP • The AUTO mode determines how much tape is left and switches speed from SP to SLP , if necessary , to complete recording the program. There will be some picture and sound distortion at the point of the speed change.
13 CHECKING THE RECORDING TIME Press REC once to check the recording time. The recalled setting will automatically appear on the TV screen after 6 seconds. TO EXTEND THE RECORDING TIME The recording time can be extended at anytime by press- ing REC . Subsequent presses result in advancing the recording time by 30-minute increments.
14 MUL TICHANNEL TV SOUND INDICA TOR (MTS) Appears on-screen as illustrated below when ENTER is pressed. • One or both of the indicators will light, depending on the MTS broadcast. If only STEREO appears on the TV screen. The VCR can record in stereo onto the VHS Hi-Fi audio tracks when BROADCAST TYPE is in the STEREO position.
15 TROUBLESHOOTING Cassette cannot be inserted. • Load the cassette correctly (refer to arrow on cassette). • A cassette is already in the VCR. • Check if the POWER indicator is lit on the VCR indicator panel. If not, make sure the power cord is plugged in.
P/N: (8)3834RV0003B - (1E12/03) Copyright SANYO, 2004 All rights reserved. Printed in Indonesia For assistance in obtaining repairs and operational information, please contact the following T oll Free.
An important point after buying a device Sanyo VWM-900 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Sanyo VWM-900 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Sanyo VWM-900 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Sanyo VWM-900 you will learn all the available features of the product, as well as information on its operation. The information that you get Sanyo VWM-900 will certainly help you make a decision on the purchase.
If you already are a holder of Sanyo VWM-900, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Sanyo VWM-900.
However, one of the most important roles played by the user manual is to help in solving problems with Sanyo VWM-900. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Sanyo VWM-900 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center