Instruction/ maintenance manual of the product AL1731 Acer
Go to page of 10
1 Table of Contents Preface ............................................................................................................................... 1 Chapter 1 Inst allation......................................................................
2 Important Safety Instructions Please read the following instructions carefully. Th is m anual should be retained for future use. 1. To clean LCD Monitor screen; -- Power off LCD Monitor and unplug the AC Cor d. -- Spray a non-solvent cleaning solution onto a ra g.
3 Detaching LCD Monitor from Its Stand Unscrew screws n the swivel base support column and pull it from main body. Figure 1-3 Interface for Arm Applications Before installing to mounting de vice, please refer to Fig.1-3. The rear of this LCD display has four integrated 4 mm, 0.
4 Setting Up the LCD Monitor 1.Make sure the AC power cord is connected to the LCD Monitor. 2.Turn on the LCD Monitor's power switch, located on the bezel of the monitor. Power Management System This LCD Monitor complies with the VESA DPMS (versi on 1.
5 Adjusting the Monitor's Display The monitor has four function control buttons to select among functions shown on OSD menu, designed for easy user-viewing environments. OSD Function Menu To access OSD Main menu, simply press one of the Function Select control buttons, and the menu diagram will pop up on the screen as shown on Fig.
6 Exit To exit the main menu. Options OSD To move t he OSD image. OSD H-position To move the OSD ima ge horizontally left or right. OSD V-position To move the OSD image vertically up or down. Language You can choose one of the nine languages you need.
7 ATTL This features adjusts < to decrease left speaker volume and > to increase left speaker volume. ATTR This features adjusts < to decrease right speaker volume and > to increase right speaker volume. Loudness This features choose on or off to get loudness.
8 Video Input Signal Input Impedance Polarity Amplitude Multi-mode Supported Analog RGB 0.7Vpp 75 Ohm ± 2% Positive, Negative 0 - 0.7 ± 0.05 Vpp Horizontal Frequency: 30 ~ 80 KHz Vertical Frequency:.
9 Power Supply (AC Input) Input Voltage Single phase, 100 ~ 240VAC, 50 / 60 Hz Input Curren t 1.5 A maximum Size and Weight Dimensions 381 (W) x 400 (H) x 147 (D) mm Net Weight 5.
10 Standard Timing Table If the selected timing is NOT included in table below, this LCD monitor will use the most suitable available timing. Resolution H. Freq. (KHz) V. Freq. (Hz) Pixel Freq. (MHz) H/V Sync. Polarity Mode 640 x 480 31.469 59.940 25.
An important point after buying a device Acer AL1731 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Acer AL1731 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Acer AL1731 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Acer AL1731 you will learn all the available features of the product, as well as information on its operation. The information that you get Acer AL1731 will certainly help you make a decision on the purchase.
If you already are a holder of Acer AL1731, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Acer AL1731.
However, one of the most important roles played by the user manual is to help in solving problems with Acer AL1731. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Acer AL1731 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
