Instruction/ maintenance manual of the product NV 6000 EXP AVerMedia Technologies
Go to page of 120
AVerMedia ® NV 3000/5000/60 00(EXP)/7000H Digital Video Recordin g System User Manual V ersion 7.1(SP1).
FCC NOTICE This device has been tested and found t o comply with the limi ts for a Class A digital device, pu rsuant to Pa rt 15 of the FCC Rules . These limits are designe d to provide reaso nable protecti on against h armful inte rference in a c ommercial , industrial or business environment.
In no event will AVerMedia ® be liable f or direct, indi rect, speci al, incidental, o r consequential damag es arising out of t he use or inabilit y to use this prod uct or documentation, even if advised of the possibility of such damages. TRADEMARKS AVerMedia ® is a trademark of AV erMedia ® TECHNOLOGIES, Inc.
i T able of Content s Chapter 1 Introduction..................................................................................... 1 NV3000 Package ........................................................................................................
ii 2.6.2 Installing (1) NV6000 Ex press and I/O ca rd ................................. 13 2.7 NV7000H Hardware Installation ................................................................................. 14 2.7.1 Installing (1) NV 7000H and I/ O ca rd.
iii 4.7 Setting Up and Using the Emap ................................................................................. 36 4.7.1 T o Set Up the Emap .................................................................. 36 4.7.2 T o Use the Emap .........
iv 5.9.7 T o Setup SMS/MMS Setting: .......................................................... 68 5.9.8 T o Setup PTZ Pr ese t Point: ........................................................ 68 5.9.9 T o Setup Al arm SO P : ...........................
v Chapter 1 1 Web T o ols.................................................................................. 103 11 . 1 Dispatch Server ........................................................................................................ 103 11 . 2 Remote Backup .
Manual Conventions The following conventions are used throughout this manual. Caution symbol is intended to alert the user of the important installation and operating instructions. Fail to comply may damage the system. i Information symbol is intended to provi de additional information for t he purpose of clarification.
1 Chapter 1 Introduction A V erMedia A V erDVR is a 32-bit PCI video capt ure card that works as a digital video surveillance system. It enables you to capture true color images and real-time videos from 4 up to 16 camera inputs simultaneously .
NV3000/5000/6000(EXP)/7000H User Manual 2 NV6000 Express Pac kage NV6000 Express package includes the following: (1) (2) (3) (4) (5) (6) 8 FC - 26P (7) (1) NV6000 (3) 2X A V cable (5) Installation CD .
Chap ter 1 I n troductio n 3 OSD kit (optional) This allows you to operate NV DVR with the use of remote contr ol. (1) (2) (3) (4) (1) Remote Control (batteries included) (2) IR USB Receiver (3) OSD Installation CD (4) 2X V elcro Strip s i OSD control is not supported un der dual monitor environment.
NV3000/5000/6000(EXP)/7000H User Manual 4 NV6000 Card Parts D-type AV IN port 01 TV out port I/O connector Reset pin Watchdog pin D-type AV IN port 02 NV 6000 Express Card Part s DVI AV IN port 01 I/O.
Chap ter 1 I n troductio n 5 IR USB Receiver Part & Connection USB Port IR sensor i For detail of OSD kit installation, please refer to OSD kit Quick Guide.
6 Chapter 2 Hardware Installation 2.1 Minimum System Requirem ents First, must verify if the computer meets the minimum system requirements. NV 3000/5000/6000/7000H: NV3000 NV5000 NV6000 NV7000H CPU Pentium ® 4 2.
Chapter 2 Hardw a re Inst a ll ation 7 2.2 NV3000/5000/600 0(EXP)/7000H Hardware Combinations A V erMedia NV DVR provides powerful su rveillance functions and flexible hardware combinations. The table show s the numbers of camera inputs, audio inputs, sensor inputs and relay outputs on different hardware combinations.
NV3000/5000/6000(EXP)/7000H User Manual 8 NV6000 Express hardw are combinations: Hardware Combinations NV6480 Card IO Card Camera Input Audio Input Sensor Input Relay Output 1 1 16 16 4 4 Hardware Com.
Chapter 2 Hardw a re Inst a ll ation 9 2.3 NV3000 Hardw are Installation 2.3.1 Installin g (1) NV3000 and (1) I/O A udio cards (optional) i The I/O audio card is an optional item.
NV3000/5000/6000(EXP)/7000H User Manual 10 IN 1 IN 2 IN 3 IN 4 TV OUT IN 1 IN 2 IN 3 IN 4 TV OUT Card 1 NV3000 Card 2 Card 3 Card 4 Channel 1 2 3 4 5 6 7 8 IN 1 IN 2 IN 3 IN 4 TV OUT IN 1 IN 2 IN 3 IN.
Chapter 2 Hardw a re Inst a ll ation 11 NV5000 card I/O Audio card IN 1 IN 2 IN 3 IN 4 TV OUT NV5000 card I/O Audio card Channel 1 2 3 4 AUDIO IN 1 AUDIO IN 2 AUDIO IN 3 AUDIO IN 4 2.4.3 Inst alling (1) NV5000 a nd (3) BNC video extension cards i The BNC video extension card is an optional item.
NV3000/5000/6000(EXP)/7000H User Manual 12 NV5000 card BNC extension card IN 1 IN 2 IN 3 IN 4 TV OUT IN 1 IN 2 IN 3 IN 4 NV5000 Channel 1 2 3 4 5 6 7 8 BNC video extension card I/O Audio card AUDIO IN 1 AUDIO IN 2 AUDIO IN 3 AUDIO IN 4 I/O Audio card 2.
Chapter 2 Hardw a re Inst a ll ation 13 NV6000 card I/O card TV OUT NV6000 I/O card AV connection cable AV connection cable 2.6 NV6000 Express Hardw are Installation The NV6000 Express can support up to 16 cameras and 8 audio inp uts 2.
NV3000/5000/6000(EXP)/7000H User Manual 14 NV6000 Express card I/O card NV 6000 Express I/O card AV connection cabl e AV connection cabl e 2.7 NV7000H Hardware In stallatio n The supplied A V connection c able provides up to 16 cameras and 8 audio inputs.
Chapter 2 Hardw a re Inst a ll ation 15 NV7000H card 1 I/O card 1 NV7000H card 2 I/O card 2 TV OUT NV7000H card 1 I/O card 1 TV OUT NV7000H card 2 I/O card 2 2.
NV3000/5000/6000(EXP)/7000H User Manual 16 2.8.2 Connecting the W atchdog line to NV6000 1. Look for the labeled RESET SW switch lead and connect it to the NV6000 card reset pin. 2. Connect the supplied Watchdog line to the NV6000 card watchdog pin and the other end to the motherboard RESET SW panel.
Chapter 2 Hardw a re Inst a ll ation 17 2.9 Connecting t he Cameras, a TV and Audio device 2.9.1 Connecting the Cam eras, a TV and A u dio device to NV3000/5 000 1.
NV3000/5000/6000(EXP)/7000H User Manual 18 Camera 5 Camera 6 Camera 7 Camera 8 Camera 2 Camera 3 Camera 1 Camera 4 MIC 3 MIC 2 MIC 4 MIC 1 RCA cable Television TV OUT NV600 0 AV connection cable Camera 13 Camera 14 Camera 15 Camera 16 Camera 10 Camera 11 Camera 9 Camera 12 MIC 7 MIC 6 MIC 8 MIC 5 AV connection cable 2.
Chapter 2 Hardw a re Inst a ll ation 19 NV6000 Express Camera 5 Camera 6 Camera 7 Camera 8 Camera 2 Camera 3 Camera 1 Camera 4 MIC 3 MIC 2 MIC 4 MIC 5 MIC 6 MIC 7 MIC 8 MIC 1 RCA cable Television AV c.
NV3000/5000/6000(EXP)/7000H User Manual 20 2.10 Dual Monitors Setup The NV DVR system Supports Single and Dual monitor displays. When using dual monitors, the E-map and Playback function will be display on the second monitor . The Video configuration is different for each di f ferent VGA chipsets.
Chapter 2 Hardw a re Inst a ll ation 21 4. Select the Extended Desktop and then click Finish . 5. If user selected the Advanced mode, click the Vi ew button. 6. In Displa y Manager , right click on the second Displa y on the right side and select Extend Main onto monitor .
NV3000/5000/6000(EXP)/7000H User Manual 22 2.10.2 Graphic card with NVIDIA chipset 1. Click the NVIDIA nView , and select the Dualview mode. 2. Adjust each monitor resolution to 1024x768. 3. T o review if the display mode is correct, you can check the task bar .
Chapter 2 Hardw a re Inst a ll ation 23 D-Type I/O port AUDIO IN 1 NV3000 I/O Audio card AUDIO IN 1 AUDIO IN 2 AUDIO IN 3 AUDIO IN 4 NV5000 I/O Audio card D-type cable 2.11.1 I/O box Sensor a nd Relay pinhole al location: The signal from the sensor (i.
NV3000/5000/6000(EXP)/7000H User Manual 24 Pin # Definition Pin # Defini ti on 1 Sensor input sig nal 1+ 11 Relay Normal Close 1 2 Sensor outpu t signal 1-(GND) 12 Relay Common 2 3 Sensor input sig na.
Chapter 2 Hardw a re Inst a ll ation 25 C. COIL RA TINGS (at 20 oC ) Coil Nominal V oltage (VDC) Coil Resistance 10% Pick-up V oltage (VDC) Drop-Out V oltage (VDC) Nominal Current (mA) 5 125 3.75 0.5 40 * Max Continuous Voltage at 20 o C : 1 10% of Coil Nominal Voltage D.
26 Chapter 3 Software Installation This chapter describes how to install the NV DVR software and drivers. The CD-Key is permitted for use on a singl e computer. It is prohibited to use the CD-key on more than one computer . Once detecte d, this would cause a system conflict and some of the features might fail to work on both PC.
Chapter 3 Software Installation 27 3.1 Installing NV DVR Software and Drivers in Windows XP/2000 Upon turning the computer on, the system automatically detects the newly installed hardware. When the Found New Hardware dialog box ap pears, IGNORE it. Remember : It is important to install the NV DVR sof tware first, before installing the drivers.
28 Chapter 4 Using the NV DVR Software 4.1 Running the NV DVR Soft w are T o run the application, double-click on your PC desktop or click Start > Progra ms > DSS > NV DVR . For security purpose, some of the features would require you to enter User ID and Password before it can be accessed.
Chapter 4 Using the NV DVR Software 29 4.3 Familiarizing the Buttons in Prev iew /Advanced Mode Name Function (1) Exit Call up the Logout dialog box. In the logout dialog box , you may do the following : - Click Exit to close the NV DVR program. - Click Login to sign-in in different acc ount.
NV3000/5000/6000(EXP)/7000H User Manual 30 Name Function (5) Emap Display the map in each area, and the location of camera/ sensor/ rela y and the warning. (see also Chapter 4.7 ) (6) Network Enable/disable remote system access. This feature allows you to access NV DVR server from a remote location via internet connection.
Chapter 4 Using the NV DVR Software 31 4.3.1 Using Event Log Viewer Show the record of activities that take place in the system. 1. Click the Event Log button on DVR system main interface. The Event log viewer window will show up. 2. Select the Date to view or search certain event log by key word.
NV3000/5000/6000(EXP)/7000H User Manual 32 Name Function (4) Search String Enter specific key word or word st ring to search the POS event log. Mark the “Match whole word exactly” box if wants to find exactly key word or word string of POS event log.
Chapter 4 Using the NV DVR Software 33 Name Function (2) AutoScan St art/S top video screen c ycle switch (3) Alarm Alert and display warning info. (4) Playback Switch to Playback mode. This allows you to view the recorded video file. (see Chapter 4.5 ) (5) Advanced Switch to Preview/Advanced mode.
NV3000/5000/6000(EXP)/7000H User Manual 34 Name Function (3) Hour Buttons Select and click to playback the recorded video file on the specific time frame. i The Hour buttons represent the ti me in 24-hour clock. The blue bar on top of the hour button indicates that there is a recorded video file on that period of time.
Chapter 4 Using the NV DVR Software 35 Name Function (14) Full screen View in Playback-comp act mode. T o return, press the right button of the mouse or ESC on the keyboard or click the arrow icon. When you switch to full screen in multiple-screen mode, Left click to toggle to only display one of the video in the multiple-screen mode or all.
NV3000/5000/6000(EXP)/7000H User Manual 36 4.6 Familiarizing the Buttons in PTZ Camera Controller (see also chapter 4.13 ) Name Function (1) Close Exit PTZ camera controller . (2) Setup Configure PTZ cameras.(also see Chapter 4.13 ) (3) AutoPan Operate the PTZ cameras automatically based on the selected camera group preset position number .
Chapter 4 Using the NV DVR Software 37 4. When the inserted map appears on the Emap screen, click Edit . Y ou may now drag t he camera, sensor , and relay icons to its pl ace on the map. Icons on the map can be relocated anywhere. Right click camera icon c an select the camera direction in 8 angles.
NV3000/5000/6000(EXP)/7000H User Manual 38 4.8 To Cut and Sa ve the Wanted Portion of the Recorde d Video 1. Use the Play back Control buttons or drag the ba r on the playback progress bar and pause on where you want to start the cut. Then, click Segment to set the begin mark.
Chapter 4 Using the NV DVR Software 39 Seconds of that minute, every Second of that 10 seconds. T o go back, click . T o view from the selected frame and close event search, click . 4.11 To Search Using the E vent Search 1. Click on the video screen on where you want to search.
NV3000/5000/6000(EXP)/7000H User Manual 40 4.13 To Setup the PTZ/IP PTZ Camera 4.13.1 Setup the PTZ Camera 1. In the PTZ control panel, click Setup . 2.
Chapter 4 Using the NV DVR Software 41 4.13.2 Setup the IP PTZ Camera 1. In the PTZ control panel, click Setup . 2. When the PTZ Setup dialog box appears, click IP PTZ tab.
.
43 Chapter 5 Customizing th e NV DVR System In the Preview/Advanced screen mode, click button to customize your NV DVR. When the NV DVR configuration setup selection appears, select and click the buttons you want to change the setting.
Chapter 5 Customizing NV DVR Sy stem 44 of days in Days text box. (2) Hard Disk Calculator Estimate the hard disk recording capacity . The result of calculation is a rough value which only for reference. The hard disk record cap acity will be varied by the real record quality and complexity of video scene.
NV3000/5000/6000(EXP)/7000H User Manual 45 on the computer , then there is only one video card channel for selection. (2) Select the display mode as Autoscan . (3) Preview screen: Live camera video would be displayed here. (4) Video Mode: Select the video mode user wants to display on screen.
Chapter 5 Customizing NV DVR Sy stem 46 Enable the conditions in Miscellaneous section you want the system to perform. - Status Re p or t Send a daily system event and attention analysis report. T o change the e-mail settings, click Setup . - Desktop Lock Deactivate the [ Ctrl-Alt-Del ] and [ Windows ] keyboard key functions.
NV3000/5000/6000(EXP)/7000H User Manual 47 5.1.1 T o Set the POS Setting: 1. In the System Setting dialog box, POS section, click Setting . T o set the text flow and color format, click Advance .
Chapter 5 Customizing NV DVR Sy stem 48 (5) Port Setting : Select the Local or Remote port to where it is connected. Local - select the COM port number which is connected. Remote – Use the UDP protocol for remote connection if POS system can broadcast to Internet.
NV3000/5000/6000(EXP)/7000H User Manual 49 (3) Camera - Display Enable/disable to show the video. Even if the video of the selected camera is hidden you can still record the video and preview it in playback mode. - Name Change the camera name. - Description Add a short comment.
Chapter 5 Customizing NV DVR Sy stem 50 2. Enable Detected Regions in Dis play section. This enables the object counting information show on the screen. Moving Object will enable the object size frame to show on the screen. 3. Click Region1 and press left button of mouse and drag the area that user wants the object to be counted.
NV3000/5000/6000(EXP)/7000H User Manual 51 5.3 Recording Setting In the Recording dialog box, click OK to accept the new settings, click Cancel to exit without saving, and click Default to revert back to original factory setting. (1) Camera Icons Select the camera number you want to set the recording setting.
Chapter 5 Customizing NV DVR Sy stem 52 (3) Enable Audio Select to assign the audio channel of the selected camera. Y ou can only assign one audio channel to one camera source. This way you can record both audio and video. i An Audio I/O card is required to use this function.
NV3000/5000/6000(EXP)/7000H User Manual 53 MPEG4 MPEG 4 Encryption H264 H264 Encryption MJPG NV 3000 9 9 9 9 9 NV 5000 9 9 9 9 9 NV 6000 9 9 9 9 NV 6000 Express 9 9 9 9 NV 7000H 9 Using the Advanced MPEG4 enables you to enc r ypt the recorded video that way onl y the person who knows the password can clearly view the video playback.
Chapter 5 Customizing NV DVR Sy stem 54 T o encrypt the recoded video back, click and enter a WRONG password. i It is important to encrypt the video again, to avoid unauthorized user viewing the video.
NV3000/5000/6000(EXP)/7000H User Manual 55 and register .(also see Appendix A ) Y ou will be prompted to enter CD key number , product name, password, and user information. Use this service if the IP address changes each time when you connect to internet.
Chapter 5 Customizing NV DVR Sy stem 56 - Enable Handy View Enable remote users to use a PDA or a mobile phone to access NV DVR server and select the video size and quality . (See also Chapter 8. 5 and 8.6 ) - Network Bandwidth Limit By Channel: Set the network bandwidth by each channel.
NV3000/5000/6000(EXP)/7000H User Manual 57 5.5 Schedule Setting Schedule to record, backup, enable network, r eboo t and disable alarm of all the cameras either weekly or one time. The number from 00 to 23 represent the time in 24-hour clock. The left most column display the days in a week.
Chapter 5 Customizing NV DVR Sy stem 58 5.5.1 T o set sch edule at a specific portion of time in that hour: 1. Right click the colored blocks. 2. In the Select time dialog box, click to enable or disable the portion you want to set. 3. Click OK to accept the setting and Cancel to exit without saving the setting.
NV3000/5000/6000(EXP)/7000H User Manual 59 5.6 Backup Setting In the Backup Setting dialog box, the number from 00 to 23 represent the time in 24-hour clock. The numbers from 01 to 16 represent the camera number . When you back up the file, you may find QLog Viewer and Player application included in the backup folder (see also Chapter 6 ).
Chapter 5 Customizing NV DVR Sy stem 60 9. In CD/DVD Backup, enable/disable Delete file after burning check box to remove the archived file after burning. Click Burn to start and Exit to cancel this process. 5.7 Sensor Setting The I/O device must be installed to use this function.
NV3000/5000/6000(EXP)/7000H User Manual 61 5.9 Alarm Setting In the Alarm Setting dialog box, click Ad d to insert and set new alarm setting, click Delete to remove the selected alarm setting, click OK to exit and save the setting, Cancel to exit without saving, and Default to revert back to original factory setting.
Chapter 5 Customizing NV DVR Sy stem 62 - Enable/disable the Abnormal Event check box, to set the condition of the event for system to alarm. • Normal Reboot: when the NV DVR s ystem reboot without abnormal condition, the system will send out the alarm message.
NV3000/5000/6000(EXP)/7000H User Manual 63 7. In (6) Action , yo u may now set the alarm action for the system to p erform when the alarm condition is activated. - Launch E-Map Display mini Emap screen. - TV Out Switch to only display the video on TV from where the alarm is activated or selected camera.
Chapter 5 Customizing NV DVR Sy stem 64 - Relay Output Set to enable/disable the relay operation when the alarm is activated and to extend additional time in second before it st ops the relay operation (see also Chapter 5.9.1 ). - Play W ar ning Sound Play alarm sound.
NV3000/5000/6000(EXP)/7000H User Manual 65 5.9.1 T o Setup Alarm Relay: 1. Beside the Relay Output check box, click Detail . 2. In the Alarm Relay dialog box, select from the available rela y list and in the ON column, set to enable/disable the relay operation when the alarm is activated.
Chapter 5 Customizing NV DVR Sy stem 66 5.9.3 T o Setup Call Out List: 1. Beside the Make Phone Calls check box, click Det ail . 2. In the Call Out List, click Ad d to insert a new contact number , Modify to edit the selected item, Remove to delete the selected item, T est to check if it is working.
NV3000/5000/6000(EXP)/7000H User Manual 67 T o a nd CC: Enter the recipient email address and separate it with comma or a semicolon (;). Subject: Enter the messa ge title. Message: T ype the message. (3) Email Notice Setting Notice Inter val: Set the period of time before it sends another e-mail notice.
Chapter 5 Customizing NV DVR Sy stem 68 5.9.7 T o Setup SMS/MMS Setting: T o use this feature, GSM/GPRS m odem is required. Connect the GSM/GPRS modem to the serial COMM port of PC. Beside the SMS/MMS check box, click Det ail . 1. Select the port number in ComPort drop down list from where the GSM/GPRS modem is connected.
NV3000/5000/6000(EXP)/7000H User Manual 69 5.9.10 T o Setup CMS Settin g Beside the Send to CMS check box, click Detail . In the CMS Setting, select the camera to enable/disable sending the video to CMS. Enable Al l to select all cameras. Then, click OK to accept the new settings and Cancel to exit without saving.
Chapter 5 Customizing NV DVR Sy stem 70 4. Use the mouse to click and drag the frame on the screen. User can drag more than one frame. 5. Sensitivity: Set the system detects sensitivity . 6. Delay Time: Set the lasting time for system to detect the object.
NV3000/5000/6000(EXP)/7000H User Manual 71 - Scene Change When the camera has been moved, the system will alarm. 1. Select the camera number (0-16) and press right button on the mous e to call up the setup windows. And then, click the Scene Ch ange T ab.
Chapter 5 Customizing NV DVR Sy stem 72 After clicking Add or Edit , you m ay customize the user control setting. OK to exit and accept the setting, and Cancel to exit without saving the setting (1) (2) (3) (4) (5) (6) (7) (8) (1) Authorization le vel Select the status of the user .
NV3000/5000/6000(EXP)/7000H User Manual 73 (6) Description Enter the user description. (7) Password Enter the user password. (8) Confirm Passw ord Enter the same user password for confirmation.
74 Chapter 6 Backup Vid eo Players Y ou can playback the backup files using QLogVie wer and Player applications. When you back up the recorded file, QLogViewer and Player applications are automatically included in the backup folder . QLogViewer can only playback one video at a time.
NV3000/5000/6000(EXP)/7000H User Manual 75 Name Function (1) T ime Display the file date, time and play speed. (2) File Display the path where the file is located. (3) Playback Control Buttons Begin: Move to the beginning of the recorded video file. Previous: Go back to the previous frame.
Chapter 6 Backup Video Player 76 6.2 Familiarizing the Player Buttons (3) (5) (4) (6) (8) (7) (10) (9) (11) (12) (13) (14) (17) (16) (15) (1) (2) Name Function (1) S pl it Screen Mode Select from six (6) different split screen type to playback the recorded video file of all the camera, or one camera over the other or alongside on a single screen.
NV3000/5000/6000(EXP)/7000H User Manual 77 Name Function (6) Date Select the date on the calendar and the time from 00 to 23 to where to start playing the recorded video file. i The numbers from 00 to 23 represent the time in 24-hour clock. The numbers from 01 to 16 represent the camera ID.
78 Chapter 7 Using Functiona l Keys The NV DVR system provides shortcut ke ys. The table shows the function keys and descriptions. Function Keys description F1 Display system information F2 S tart rec.
79 Chapter 8 Using the Remo te Programs Y ou can use Microsoft Internet Explorer to a ccess NV DVR server by entering the IP address or domain name. T o use this feature, make sure that you are connected to the intern et and the Network feature is enabled.
Chapter 8 Using the Remote Programs 80 8.1 Familiarizing the NV DVR WebVie wer Buttons Right-clicking on the webcam video screen, enables you to start video recording, change video quality , switch camera and enable/disable DirectDra w .
NV3000/5000/6000(EXP)/7000H User Manual 81 Name Function (10) Remote E-Map Display the NV DVR server Emap screen (see also Chapter 4.7 ). (1 1) Remote setup Change the NV DVR server settings (see also Chapter 8.1.1 ). (12) Select a PTZ camera Initiate PTZ camera control ler (see also Chapter 8.
Chapter 8 Using the Remote Programs 82 8.1.1 T o Setup Remo te System Setting Click OK to exit and save the setting and Cancel to exit without saving the setting. The setting here applies to Remote DVR only . (11) (12) (13) (14) (10) (1) (9) (8) (7) (6) (5) (4) (3) (2) (1) Camera Name Select the camera you want to adjust the settings.
NV3000/5000/6000(EXP)/7000H User Manual 83 - Motion Recording S tart recording the video from the selected camera onl y when the system detects motion. Once a motion is detected, the sy stem automatically saves the previous frames and stop based on the Start Record Prior and Stop Record After settings.
Chapter 8 Using the Remote Programs 84 8.2 Familiarizing the WebVie w er PTZ Buttons (4) (3) (2) (5) (6) (1) Name Function (1) Direction buttons Adjust and position the focal point of the PTZ camera. Click the center to pan automatically . (2) Select PTZ Choose to enable/disable the PTZ camera.
NV3000/5000/6000(EXP)/7000H User Manual 85 8.3 Familiarizing the Re mote Console Buttons (1) (3) (8) (7) (6) (5) (4) (9) (10) (12) (13) (14) (15) (2) (11) Name Function (1) Exit Close the Remote Console.
Chapter 8 Using the Remote Programs 86 Name Function (13) Snapshot Capture and save the screen shot either in *.jpg or *.bmp format. (14) Full screen Use the entire area of the screen to only display the video. T o return, Right click the mouse or press ESC on the keyboard.
NV3000/5000/6000(EXP)/7000H User Manual 87 8.4 Using the R emote Play back T o use this feature, first you need to select the source of the file. In the Select Playback Mode dialog box, choose Local Playback to open the file that is recorde d in the Remote Console, and Remote Playback to open th e file that is recorded in the NV DVR server .
Chapter 8 Using the Remote Programs 88.
NV3000/5000/6000(EXP)/7000H User Manual 89 8.4.1 Familiarizing th e Local Playback Buttons (2) (4) (3) (5) (6) (9) (8) (7) (10) (11) (12) (13) (1) Name Func tion (1) S plit Screen Mode Select from six (6) different split screen types to playback the recorded video file of all the camera, or one camera over the other or alongside on a single screen.
Chapter 8 Using the Remote Programs 90 Name Func tion (4) Playback Control Buttons Next: Go to the next frame. End: Go to the end of the recorde d video file. (5) Date Select the date on the calendar and the time from 00 to 23 to wher e to start playing the recorded video file.
NV3000/5000/6000(EXP)/7000H User Manual 91 8.4.2 Familiarizing the RealTime Playback Buttons (2) (4) (3) (5) (6) (9) (8) (7) (10) (11) (1) Name Function (1) S plit Screen Mode Select from two (2) different split screen type to playback the recorded video file of all the camera, or one camera.
Chapter 8 Using the Remote Programs 92 Name Function (5) Date Select the date on the calendar a nd the time from 00 to 23 to where to start playing the recorded video file. i The numbers from 00 to 23 represent the time in 24-hour clock. The numbers from 01 to 16 represent the camera ID.
NV3000/5000/6000(EXP)/7000H User Manual 93 8.4.3 Familiarizing the Download and Playback Buttons (2) (8 ) (7 ) (4 ) (6 ) (5 ) (1) (3) Name Function (1) Progress bar Show the progress of the file being played. Y ou may move the bar to seek at any location of the track.
Chapter 8 Using the Remote Programs 94 support IE browser and is connected to the internet. T o use this feature, you need to install the PDA Viewer software either thru ActiveSync connection or download it from th e internet. Please check if your PDA meets the 2 requirements below .
NV3000/5000/6000(EXP)/7000H User Manual 95 8.6.2 T o install PDA Viewer from the Internet Make sure you are connected to the internet. 1. Open the web browser and enter the server IP . Then click the hyperlink Download PDA-Viewer . 2. When the Download dialog box appears, enable Open file after download and click Ye s .
Chapter 8 Using the Remote Programs 96 8.6.3 T o Use th e PDA Viewer 1. Run the PD A-V i ewer 5.5 in the Programs. 2. Familiarizing the PDA Viewer buttons. (7) (6) (5) (3) (4) (8) (9) (10) (1) (2) Name Function (1) Connect Hook up to the NV DVR server.
NV3000/5000/6000(EXP)/7000H User Manual 97 3. T o change the video qualit y , enable/disable audi o, and select to display different camera, tap on the video screen longer the pop up menu will appear . 8.7 Using Java-Viewer to Access NV DVR Server Using the mobile phone within Symbian Smart Phone OS to access the NV DVR thr ough Internet.
Chapter 8 Using the Remote Programs 98 8.7.2 T o Use the J A V A-Vie w er 1. Run the JA V A-Viewer program. 2. Enter the DVR IP address, port number , user ID, and password. Please refer to your DVR server setting for that information. 3. And then, select the Connect to connect to DVR server .
NV3000/5000/6000(EXP)/7000H User Manual 99 6. T o switch to different camera view , select menu and select the channel. 7. The JA V A-Viewer support PTZ co ntrol function, you can refer to Help file for detail function control key . Select menu and go the way down to select the Help file.
100 Chapter 9 Image Verification ImageV erification is a watermark-checking progr am to identify the authenticity of a saved image (e.g. by snapshot). This program can only verify uncompressed bmp image files. 9.1 To Run the ImageVerification p rogram 1.
101 Chapter 10 iEnhan ce The bundled iEnhance is a video editing tool and can only be used with *.dvr video file. It allows you to adjust the video picture quality , segment and save the wanted portion of the video, zoom in and out the image, and print o r save the screen shot.
Chapter 10 iEnhance 102 Name Function (13) Sharpness Improve the overall image by enhancing edges. This gives the image more depth. (14) Effect s • Gray Scale : convert the image into black and white (monochrome). • Normalize: adjust the brightness intensity .
103 Chapter 11 Web Tools The bundled Web T ools includes Dispatch Serv er and Remote Back up program. T o install Web T ools, place the CD into the CD-ROM drive then click Install Web T ools . 11.1 Dispatch Ser ver Dispatch is designed to reduce the network traf fic of the NV DVR server .
Chapter 11 Web Tools 104 11.2 Remote Back up Remote Backup is purely for backing up the *.dvr file from the NV DVR sever . Y ou can select between Auto Backup and Manual Backup. Auto Ba ckup continuously archives one hou r of th e recorded data at a time, starting from the specified date.
NV3000/5000/6000(EXP)/7000H User Manual 105 - Click Add to set the storage path. - Click Delete to remove the selected storage path. - Click Schedule t o select/unselect the time you want to backup.
106 Chapter 12 Using the Remote Control Server The bundled Remote Control Server enables the PC with Central Management System program (CM3000) installed in it remotely access the NV DVR server . Y ou may need to manually run this program for CMS access the NV DVR server.
107 Appendix A Registering Domain Na mes DDNS (Dynamic Domain Name Service) is a dat a query service mainly used on the Internet for translating domain names into Internet addres s es. It allows remote client s to intelligently search dynamic servers without any previous enquiring for servers’ Internet addresses.
108 Appendix B Configure UPnP NV DVR application support UPnP function that can automatically configure the port setting to the local router . Please make sure the following items are true for the UPn.
109 4. Mark the UPnP Framework check box and click OK..
1 10 Appendix C Net w ork Service Port The following table shows the ports that DVR server uses for certain network service. Port # Variable Remote Console (CM 300 0) 5550 Y WebC am 80 Y 2-way audio 9.
111 LIMITED WARRANTY A VerMedia TECHNOLOGIES, Inc. warrants that this product to be fr ee of defect s resulting from faulty manufacturing or component s under the following term s: W ARRANTY LENGTH Labor is warranted for 15 months from the date of pu rchase.
An important point after buying a device AVerMedia Technologies NV 6000 EXP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AVerMedia Technologies NV 6000 EXP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AVerMedia Technologies NV 6000 EXP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AVerMedia Technologies NV 6000 EXP you will learn all the available features of the product, as well as information on its operation. The information that you get AVerMedia Technologies NV 6000 EXP will certainly help you make a decision on the purchase.
If you already are a holder of AVerMedia Technologies NV 6000 EXP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AVerMedia Technologies NV 6000 EXP.
However, one of the most important roles played by the user manual is to help in solving problems with AVerMedia Technologies NV 6000 EXP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AVerMedia Technologies NV 6000 EXP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
