Instruction/ maintenance manual of the product A120S Shure
Go to page of 2
GENERAL The A120S Accessory in-Line Switch can be used to add an On/OFF , Push-T o-T alk, Cough Button, or T ransmit- ter-Relay Keying function to a microphone or other device rated a t u p t o 3 amps ac (0.5 Adc) 125V , non-inductive load. The switch has gold-plated contacts for reliable perfor- mance even in low-current circuits.
3. Solder the conductors to the switch terminals to ob- tain the desired function (see Figure 3 for switch configuration.) T ake care no to leave long bare con- ductors that may bridge across terminals and make unintended connections.
An important point after buying a device Shure A120S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Shure A120S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Shure A120S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Shure A120S you will learn all the available features of the product, as well as information on its operation. The information that you get Shure A120S will certainly help you make a decision on the purchase.
If you already are a holder of Shure A120S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Shure A120S.
However, one of the most important roles played by the user manual is to help in solving problems with Shure A120S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Shure A120S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
