Instruction/ maintenance manual of the product JGB92XD1W Smeg
Go to page of 27
Contents 25 INSTRUCTIONS FOR THE INSTA LLER: these are for the qualified technician who must carry out a suitable check of the gas system, install the appliance, set it functioning and carry out an inspection test.
Introduction 26 1 INSTRUCTIONS FOR SAFE AND PROPER USE THIS MANUAL IS AN INTEGRAL PART OF THE APPLIANCE AND TH EREFORE MUST BE KEPT IN ITS ENTIRETY AND IN AN ACCESSIBLE PL ACE FOR THE WHOLE WORKING LIFE OF THE COOKER. WE ADVISE READING THIS MANUAL AND ALL TH E INSTRUCTIONS THEREIN BEFORE USING THE COOKER.
Introduction 27 LOWER THE GLASS COVER SLOWL Y AND BY HAND. WARNING: THE GLASS COVER MAY SHATTER IF IT OVE RHEATS. SWITCH OFF ALL RINGS AND WAIT FOR THEM TO COOL DO WN BEFORE CLOSING THE COVER. DURING USE THE APPLIANCE BECOMES VERY HOT. TAKE CARE NOT TO TOUCH THE HEATING ELEMENTS INSIDE THE OVEN.
Instruction for the installer 28 2 INSTALLATION OF THE APPLIANCE It is the law that all gas applia nces are installed by competent persons . Corgi gas i nstallers ar e approved to work to safe and satisfactory standards .
Instruction for the installer 29 2.1 Electrical connection Make sure that the power line voltage matche s the specifications indicated on the ratin g plate located inside the storage compartment.
Instruction for the installer 30 2.3 Connecting to natural and LPG gas (Please see connection diagram) Make the connection to the appliance usin g flexible bayonet style hose in accordance to B.S. 669. T he hose connecti on at the rear of the applian ce has a ½” BSP internal thread.
Instruction for the installer 31 3 ADAPTATION TO DIFFERENT TYPES OF GAS Before performing any cleaning or maintenance work , detach the appliance from the electrical socket.
Instruction for the installer 32 3.2 Burner and nozzle characteristics table (60 cm. models) Burner Rated heating capacity (kW) LPG – G30/G31 28/37 mbar Nozzle diameter 1/100 mm By-pass mm 1/100 Reduced flowrate (W) Flowrate g/h G30 Flowrate g/h G31 Auxiliary 1.
Instruction for the installer 33 3.3 Burner and nozzle characteristics table (90 cm. models) Burner Rated heating capacity (kW) LPG – G30/G31 28/37 mbar Nozzle diameter 1/100 mm By-pass mm 1/100 Reduced flowrate (W) Flowrate g/h G30 Flowrate g/h G31 Auxiliary 1 50 30 350 73 71 Semi-rapid 1.
Instruction for the installer 34 3.4 Arrangement of burners on cooking hob BURNERS 1. Auxiliary 2. Semi-rapid 3. Rapid (60 X 60) 4. Triple crown 5. Rapid (60 X 50) 3.5 Arrangement of burners on cooking hob BURNERS 1. Auxiliary 2. Semi-rapid 3. Rapid 4.
Instruction for the installer 35 3.6 Adjustment of the oven burne r (only for gas oven models) To adjust the oven burners follow the p rocedure described be low from inside the oven: • Open the oven door; • Remove the oven dish and shelf. • Lift up the oven floor and remove.
Instruction for the installer 36 4 FINAL OPERATIONS After replacing the nozzles, reposition th e flame- spreader crown s, the burner caps and the grids. Following adjustment to a gas othe r than the preset one, replace the gas adjustment label fixed to th e appliance with the one correspondi ng to the new gas.
Instruction for the user 37 5 DESCRIPTION OF FRONT PANEL CONTROLS All the oven controls are groupe d together on t he front panel. The table below provide s a description of the symbols used.
Instruction for the user 38 OVEN LIGHT SWITCH (CERTAIN MODELS ONLY) This switch allows the light inside the oven to be switched on at any moment. Tramite questo tasto è anche possibile far pa rtire il motorino girarrosto.. MINUTE COUNTER K NOB (CERTAIN MODELS ONLY) Turn clockwise to wind up the alarm and set to the desired time.
Instruction for the user 39 6 USE OF THE COOKING HOB 6.1 Lighting of the cooking hob burners Before lighting the hob burners check that the flam e caps are in the correct position and that thei r burner caps are in place, making sure that the holes A in the flame caps correspond to the spark plug s and thermocouples.
Instruction for the user 40 6.3 Diameter of containers (60 cm. models) BURNERS (60 X 50) 1. Auxiliary 2. Semi-rapid 5. Rapid Ø min. and max. (in cm. ) 12 – 14 16 – 22 18 – 24 BURNERS (60 X 60) 1. Auxiliary 2. Semi-rapid 3. Rapi d 4. Triple crown Ø min.
Instruction for the user 41 6.5 Switching on the electric hob 6.5.1 Switching on the electric hobs The cookers are equipped with hob s of different di ameters. These are controlled by a switch and are turned on by turning the knob to the desired positi on.
Instruction for the user 42 7 USE OF THE OVEN For those models with electronic programmer, before using the ove n make sure that th e display shows the symbol .
Instruction for the user 43 7.4 Use of the electric grill 7.4.1 Using the grill in cookers with electric oven Having opened the o ven door, press the knob and turn it clockwise to the grill position, placing a lit match to the burner on the roof of the oven.
Instruction for the user 44 How to use the grill Once the grill is lit, the red wa rni ng light will come on. Leave th e oven to heat up for five minutes before placing the food inside. Food should be flavoured and ba sted with oil or melted butter before cooking.
Instruction for the user 45 7.5 Use of the gas grill 7.5.1 Manual lighting of the gas grill burner Having opened the o ven door, press the knob and turn it clockwise to the grill position, placing a lit match to the burner on the roof of the oven. Once the burner is lit, hold the knob down for about 10 se co nds.
Instruction for the user 46 8 ELECTRONIC PROGRAMMER (ONL Y ON EQUIPPED MODELS) LIST OF FUNCTIONS MINUTE-COUNTER KEY COOKING TIME KEY END-OF-COOKING KEY DECREASE TIME KEY INCREASE TIME KEY 8.1 Clock adjustment When using the oven for the first tim e, or after a power failure, the di splay flashes re gularly and indicates .
Instruction for the user 47 8.4 End of cooking When cooking is over, the oven w ill automatically swit ch off and, at the same time, an intermittent alarm will sound. After swit ching off the alarm, the display will once again show the rig ht time together with the symbol , indicating that the oven has returned to manual operation mode.
Instruction for the user 48 9 DIGITAL TIMER (CERTAIN MODELS ONLY) This component allows an on -off beeper to be set to indicate the end of the cooking time. It is therefore just a timer, wi th no programming functions. LIST OF FUNCTIONS TIME-SETTING BUTTON VALUE DECREASE BUTTON VALUE INCREASE BUTTON 9.
Instruction for the user 49 11 CLEANING AND MAINTENANCE 11.1 Cleaning stainless steel and enamelled versions To maintain stainless steel in good condition it must be cleaned regularly a fter each use, once it ha s cooled down.
Instruction for the user 50 11.2.2 Grids Remove the grids and clean them in warm water with a non-abrasive dete rgent, taking care to remove any incrustations. Replace them on the cooking ho b. Continuous contact of the grids with the flame can cause the paint near the hot areas to be altered.
Instruction for the user 51 12 EXTRAORDINARY MAINTENANCE The oven may req uire extraordinary maintena nce or replacement of parts subject to wear such as seals, bulbs, and so on. The following i nstructions describe how to carry out these minor maintenance operations.
An important point after buying a device Smeg JGB92XD1W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Smeg JGB92XD1W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Smeg JGB92XD1W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Smeg JGB92XD1W you will learn all the available features of the product, as well as information on its operation. The information that you get Smeg JGB92XD1W will certainly help you make a decision on the purchase.
If you already are a holder of Smeg JGB92XD1W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Smeg JGB92XD1W.
However, one of the most important roles played by the user manual is to help in solving problems with Smeg JGB92XD1W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Smeg JGB92XD1W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
