Instruction/ maintenance manual of the product WM40T-1 Smeg
Go to page of 28
THE CONTENTS SECTION 1:BEFORE USING • Safety warnings • Recommendations SECTION 2:INSTALLATION • Removal of transportation screws • Adjustment of feet • Electrical connection • Water suppl.
SECTION 1:BEFORE USING SAFETY WARNINGS • Do not use a multiple socket or extension cord. • Do not insert a plug with damaged or b roken cord into the so cket. • If the cord is damaged it should be replace d by the manufa cturer or appointed service agent in order to avoid a haza rd.
• If you will not use your machine for a long time, unplug your machine, close the water supply and leave the door open in order to keep th e inside of the machine dry and for prevention from un plea sant odour. • As a result of the quality control procedures, a certai n amount of water may remain in your machine.
• You can adjust the balance of your machine from its feet. • First, loosen the plastic adjustment nut. • Adjust by rotating the feet upwards or downwards. • After the balance has been reached, tigh ten the plastic adjustment nut again by rotating it upwards.
Cold wat e r in let WATER DRAIN CONNECTION • Be sure that water inlet hoses are not folded, twiste d, cru shed or elongated by stretching. • Water drain hose sho uld be mounted at a height of minimum 60 cm, maximum 100 cm from the ground.
SECTION 3:TECHNICAL SPECIFICATIONS WM40T-1 Maximum dry laundry capacit y (kg) 5 Recommended loadi ng (kg) 4,5 Height (cm) 85 Width (cm) 59,6 Depth (cm) 51 Maximum spin cycle ( rpm ) 400 (*) Maximum sp.
SECTION 4:CONTROL PANEL WM40T-1 1 2 3 4 5 6 7 8 9 1-Detergent drawer 6-Program knob 2-Start/pause light 7-Start/pause button 3-Function indicator lights 8-Function buttons 4-Temperature adjustment kno.
START/PAUSE BUTTON U sed to start a selected program or pause during running. WARNING! It is required for the program knob to be brought to O(off) position before selecting the progra m or ch anging a continuing program. FUNCTION INDICATOR LIGHTS When the start/pause button or any function button is pressed,t he corresponding light turns on.
WARNING! F unctions vary depending on the model you have chosen.If you forgot to use additional function and your machi ne starts to wash push the additional function button if the indicator light is on. Additional function will be activated.If the indicator light is not on,additional function will not be activated.
1-Cotton 90°C 2- Cotton 60°C with prewash 3- Cotton 60°C 4- Cotton 40°C 5- Eco wash 6- Quick wash 7- Cotton cold 8- Synthetic 60°C 9- Synthetic 40°C 10- Synthetic cold 11- Delicate 30°C 12- Wool 30°C Rinsing Spin Draining OFF SECTION 5: WASHING YOUR LAUNDRY • Plug the machine.
• Pull the textiles like trousers,k nitted fabric,t-shirt and sweat shi rt inside out. • Wash your small clothes like socks and handkerchiefs in a wa shing bag. Wash up tol 90 ˚ C Wash up to 60 ˚ C Wash up to 30 ˚ C Not washable in w a s h i n g m a c h i n e Placement of the clothes into the machine • Open the door of your machine.
• You can use fluid detergents in all progra ms without pre-washing. For this, mount the fluid detergent level plate in the second compartment of the detergent drawer and arrang e the amount of fluid detergent according to the levels on this plate.
• The door will be unlocked i n approximat ely two minutes after the program ends.You can open the door b y pulling the handle of the door towards yourself and take out your clothe s. • After you unload your clothes leave the door op en to dry the interior of your machine.
MAX DRY LOAD CAPACITY (kg) PROGRAM DETERGENT COMPART. ADDITIONAL FUNCTION BUTTON WM40T-1 TYPE OF LAUNDRY EXPLANATIONS 1-COTTON 90 ˚ 2 5 Dirty, boil, cotton and linen textile 2-COTTON 60 ˚ (PREWASH) .
MAX DRY LOAD CAPACITY (kg) PROGRAM DETERGENT COMPART. ADDITIONAL FUNCTION BUTTON WM40T-1 TYPE OF LAUNDRY EXPLANATIONS RINSING When you need an additional rinsing to be done to y our clothes after the w ashing process, you can u se this program for all kinds o f clothes.
WARNING! Danger of being scalded! Since the water inside the pump maybe hot, wait for it to cool. DETERGENT DRAWER Detergents may form a sediment in your detergent dra wer or in housing of the detergent drawer in time. To clean the sediment, pull out the detergent drawer from time to time.
SIPHON PLUG Pull out the detrgent drawer. Remove the siphon plu g and clean the residues of the softener thoroughly. Fit the cleaned siphon plug in its location. Check if it placed properly. THE CABINET Clean the exterior surface of the cabine t of your machine with lukewarm water and a cleaning substan ce t hat will not irritate the cabinet.
SECTION 7:PRACTICAL INFORMATION Alcoholic beverages: The stain point, should first be washed with cold water, than should be wiped with glycerine and water and be rinsed with water mixed with vinegar. Shoe Polish: The stain should be slightly scratched without ruining the cloth, rubbed with detergent and rin sed.
• Remove the water inlet hose. • Remove the filters found on the water inlet valves by usin g a pincer and wash thoroughly with a brush. • Clean the filters of the water inle t hoses located o n the tap side by removing manually together with the seal.
Mould : Mould stains should be clea n ed as soon as possi ble. The stain should be washed with deterg ent, and if it does not disappear, it should be wiped with ox ygenated water (in proportion of 3%). Ink: Hold the stained area under cold water and wait until the inky water completely runs off.
FAILURE PROBABLE CAUSE METHODS OF ELIMINATION It is unplugged. Insert the plug into the socket. Your fuse is defected. Change your fuse. The electric power is off. Check the electric power. Start/pause button has not been pressed. Press the start/pause button.
FAILURE PROBABLE CAUSE METHODS OF ELIMINATION There is a small amount of clothes in the device. It does not prevent operation of the machine. Excessive amount of clothes are filled in the machine or the clothes are not placed in a well-balanced manner.
FAILURE PROBABLE CAUSE METHODS OF ELIMINATION Clothes exceeding the maximum capacity has been filled in your machine. Put the clothes in your machine in a manner not to exceed its maximum capacity. Your water may be hard. Use the amount of detergent according to the declaration of the detergent producer.
FAILURE PROBABLE CAUSE METHODS OF ELIMINATION The spining process is not done or starts with delay . No failure. The unbalanced load control may works in that way. The unbalanced load control system will try to distribute your clothes in a homogenous manner.
FAILURE CODE FAILURE INDICATOR PROBABLE FAILURE THE PROCESS TO BE DONE Err 02 The program ready light blinks. The water level in your machine is below heater. The pressure of your water supply may be low or locking. Turn on the tap to the end.Water may be cut, check it.
FAILURE CODE FAILURE INDICATOR PROBABLE FAILURE THE PROCESS TO BE DONE Err 05 The start/pause light and program end light blink. The heater of your machine or the heat sensor has failed. Shut down your machine and unplug. Turn off your tap and apply to the nearest authorized service.
SECTION 10: INTERNAT IONAL WASHING SIGNS Washing temparature. Do not wash (hand wash) Lukewarm iron. Medium hot iron. Hot iron. Do not iron. Do not tumble dry. Hang to dry. Drip dry. Dry flat. Do not bleach. Handy to bleach. All of these are dry cleaning symbols.
5 2 0 1 0 0 7 7.
An important point after buying a device Smeg WM40T-1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Smeg WM40T-1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Smeg WM40T-1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Smeg WM40T-1 you will learn all the available features of the product, as well as information on its operation. The information that you get Smeg WM40T-1 will certainly help you make a decision on the purchase.
If you already are a holder of Smeg WM40T-1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Smeg WM40T-1.
However, one of the most important roles played by the user manual is to help in solving problems with Smeg WM40T-1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Smeg WM40T-1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
