Instruction/ maintenance manual of the product VP6342 SMK-Link
Go to page of 16
Page 1 User’s Manual V ersaPoint R echargeable Wireless Media K eyboar d.
Page 2 Regulatory Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Page 3 equipment. Extension cables are not recommended, if used, they must be shielded in order to comply with the emission limits. IC Certication The term “IC” before the certication/registration number only signies that the Industry Canada technical specications were met.
Page 4 System Requirements Hardware: Desktop or notebook system with 2 available USB ports 1 for receiver dongle, 1 for charging Operating System: W indows 2000, XP , V ista or W indows 7 Package Contents 2.4GHz rechargeable wireless media keyboard 2.
Page 5 light located under the translucent scroll wheel. (See Fig. 1) 2. Please familiarize yourself with the various indicators below (See Fig 2.) Pairing of RF When receiver dongle is successfully paired up with the keyboard LED lights up for approx.
Page 6 Installing Batteries Remove the battery cover located at the bottom of the keyboard. (See Fig. 3) Insert the two supplied AAA rechar geable Ni-MH batteries (included in the package) into the battery compartment. Make sure the positive (+) and negative (-) ends of the batteries match the polarity markings inside the battery compartment.
Page 7 Charging the batteries Do not attempt to charge non-rechar geable disposable Alkaline batteries. The batteries may leak and damage your keyboard. Use only the rechargeable Ni-MH batteries supplied. Shall replacing batteries become necessary use only rechargeable Ni-MH batteries.
Page 8 It’ s recommended that you fully char ge the batteries before initial use; nevertheless it’ s ready for set up (see next step) anytime during charging. Connect the mini USB connector of the charging cable (included in the box) to the keyboard’ s mini USB port.
Page 9 Pairing the Ke yboar d to the Receiver Dongle Make sure the computer ’ s power management is set to disable hibernation mode while the product is being charged. (Go to Control Panel, Power Options, select “Hibernate” from the tabs and uncheck the box marked “Enable Hibernation.
Page 1 0 The radio frequency (RF) codes are factory preset for your convenience; the keyboard should already be paired up with the receiver at this point. Just connect the receiver dongle to the PC’ s USB port and wait for the OS to install the default driver in the background.
Page 11 1. Plug the mini USB connector of the USB adapter (included in the box) to the mini USB port on the keyboard. (See Fig. 6-1) 2. Connect the RF USB receiver dongle to the USB adapter while the adapter is plugged into the keyboard.
Page 12 that the RF is successfully connected. Caution: the auto- pairing is taking place while the keyboard and the receiver are physically connected; do not remove the receiver dongle prematurely before the LED light turns red. (See Fig. 6-2) 3. Remove the receiver from the adapter , plug the receiver to the PC’ s USB port.
Page 13 Operating Instructions This keyboard features the standard QWER TY conguration plus 8 convenient one-touch hot keys for Internet launch and media player controls. (See Fig. 8) 1. T rackball / W ake up T rackball: controls cursor movements similar to mouse functions.
Page 1 4 2. Scroller / Power-low Indicator LED: scrolls the screen up and down; same as the scroll wheel in a traditional mouse. Also doubles as power -low indicator: when scroller ashes with red LED light it’ s an indication that batteries need recharging.
Page 15 W arr anty SMK-LINK warrants to the original end-user purchaser of the Product (“you”) that the Product, excluding batteries, will be free from defects in materials or workmanship under normal use and service for one-year from date of purchase.
Page 1 6 contact information can be found on SMK-LINK website: http://www .smklink.com/support/contactsupport.html. This warranty does not affect your statutory right and you may also have other rights which vary from state to state.
An important point after buying a device SMK-Link VP6342 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought SMK-Link VP6342 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data SMK-Link VP6342 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, SMK-Link VP6342 you will learn all the available features of the product, as well as information on its operation. The information that you get SMK-Link VP6342 will certainly help you make a decision on the purchase.
If you already are a holder of SMK-Link VP6342, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime SMK-Link VP6342.
However, one of the most important roles played by the user manual is to help in solving problems with SMK-Link VP6342. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device SMK-Link VP6342 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
