Instruction/ maintenance manual of the product ECLP21 551HV Snapper
Go to page of 21
Safety Instructions & Operator’s Manual for 21” CAST ALUMINUM DECK WALK BEHIND MOWERS COMMERCIAL MODEL SERIES 1 MODELS ECLP21551HV MODEL NUMBER EXPLANATION E C L P 21 55 1 H V MODEL DESIGNATIO.
2 IMPORTANT SAFETY INSTRUCTIONS WARNING: This pow erful cutting machine is capable of amputating hands and feet and can throw objects that can cause injury and damage! Failure to comply w ith the follow ing SAFETY instructions could result in serious injury or death to the operator or other persons.
3 IMPORTANT SAFETY INSTRUCTIONS SAFE HANDLING OF GASOLINE (Continued From Previous Page) 3. DO NOT remove fuel cap or add fuel with the engine running.
4 TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTION S ................................................ 2-3 TABLE OF CO NTENTS ............................................................................. 4 SECTION 1 - FAMI LIARIZAT ION ..................
5 Section 1 - FAMILIARIZATION 1.1 INTRODUCTION This manual has been prepared for the operators of the SNAPPER WALK BEHIND MOWERS. Its purpose, aside from recommending operating and routine service requirements, is to promote safety through the use of accepted operating practices.
6 Section 2 - OPERATING INSTRUCTIONS 2.1 PRE-START CHECK LIST Make the following checks and perform the service required before each start-up. 2.1.1. Check guards, deflectors, grass bag, adapter and covers to make sure all are in place and securely tightened.
7 Section 2 - OPERATING INSTRUCTIONS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug w ire and secure aw ay from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.
8 Section 2 - OPERATING INSTRUCTIONS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug w ire and secure aw ay from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.
9 Section 3 - MAINTENANCE 3.1 INTRODUCTION To retain the quality of the mower, use genuine SNAPPER replacement parts only. Contact a local SNAPPER dealer for parts and service assistance. For the correct part or information for a particular mower, always mention model and serial number.
10 Section 3 - MAINTENANCE WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug w ire and secure aw ay from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.
11 Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug w ire and secure aw ay from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.
12 Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug w ire and secure aw ay from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.
13 Section 4 - REPAIR & ADJUSTMENTS WARNING DO NOT attempt any maintenance, adjustments or service with engine and blade running. STOP engine and blade. Disconnect spark plug w ire and secure aw ay from spark plug. Engine and components are HOT. Avoid serious burns, allow sufficient time for all components to cool.
14 TROUBLESHOOTING PROBLEM PROBABLE CAUSE CORRECTIVE ACTION Engine Will Not Start 1. Fuel tank empty, or fuel valve closed. 1. Fill fuel tank wi th fresh fuel. Turn valve to “ON”. Using Recoil Starter 2. Engine needs choking. 2. Move c hoke control to “CHOKE” position.
15 MAINTENANCE SCHEDULE ITEM SERVICE PERFORMED REF. EACH USE 5 HRS 25 HRS 50 HRS 100 HRS EACH SEASON Engine Oil Check Oil Level Page 6 X Initial Oil Change Page 9 X Periodic Oil Change Page 10 X* Air Pre-Cleaner Clean Sponge Element Engine Manual & Page 10.
16 DECAL IDENTIFICATION (1) WARNING INSTRUCTIONS. (2) WARNING (DECK): Read and follow Starting and Safety Instructions in Owner’s Manual. Improper use of machine can result in serious injury. (3) WARNING: Do Not operate without entire Grass Catcher or Guard in place.
17 DECAL IDENTIFICATION (7) GROUND SPEED: Shows direction of movement and the ability to select one of three ground speeds by moving the lever. The number 3 (Rabbit) indicates the top speed, number 2 indicates the medium speed and the number 1 (Turtle) indicates the slowest speed.
18 DECAL IDENTIFICATION (13) WARNING: DO NOT operate without grass catcher, side chute or plug installed. (14) AIR FILTER: Indicates location of engine air filter. To service the filter, read and follow the engine operating and maintenance instructions.
19 2 YEAR LIMITED WARRANTY For two (2) years from purchase date for the orig inal purchaser's residential, non-commercial use, SNAPPER , through any authorized SNAPPER dealer will replace, free o.
20 SERVICE NOTES ______________________________________________________________________________ ______________________________________________________________________________ _________________________.
21 Safety Instructions & Operator’s Manual for 21” CAST ALUMINUM DECK COMMERCIAL MODEL WALK MOWERS SERIES 1 IMPORTANT Snapper products are built using engines that meet or exceed all applicable emissions requirements on the date manufactured.
An important point after buying a device Snapper ECLP21 551HV (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Snapper ECLP21 551HV yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Snapper ECLP21 551HV - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Snapper ECLP21 551HV you will learn all the available features of the product, as well as information on its operation. The information that you get Snapper ECLP21 551HV will certainly help you make a decision on the purchase.
If you already are a holder of Snapper ECLP21 551HV, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Snapper ECLP21 551HV.
However, one of the most important roles played by the user manual is to help in solving problems with Snapper ECLP21 551HV. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Snapper ECLP21 551HV along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
