Instruction/ maintenance manual of the product W280922B Snapper
Go to page of 44
Parts Manual for REAR ENGINE RIDER SERIES 22 MODELS 280922B W280922B 281022BE 281222BE 300922B 301022BE W301022BE 301222BE 3314522BVE 331522KVE IT IS THE POLICY OF SNA PPER TO IMPRO VE ITS PRO DUCTS W HENEVER IT IS PO SSIBLE A ND PRA CTICAL TO DO SO .
2 CONTENTS DESCRIPTION PA GE WHEELS, FRONT .................................................................................................................. ...... 3 WHEELS, REA R ......................................................................
3 2, 2A 3 12 5 4 7 9 10 4 6 7 8 11 WHEELS - FRONT ITEM PA RT NO. DESCRIPTIO N 1 5-8943 ASSEMBLY, Front Tire & Rim ( Com plete) (Includes Item s 2, 3, 4, 5 & 6, ) 2 7-3563 TIRE, 11 x 4.00-4 (Kenda) 3 1-7146 RIM (For 4.10/3.50 x 4 T ire) 4 1-1807 BEARING, Ball 5 1-2234 VALVE, Air (Snap-in) 6 1-4669 FITT ING Lube 7 1-0935 W ASHER, 3/4” I.
4 6 WHEELS - REA R LEFT HA ND RIGHT HA ND MANUA L No . 06128 R. E. RIDER SERIES 22 1 A SSEMBLY 7 15 9 13 10 2 13 12 14 11 5 8 3 4.
5 WHEELS - REA R ITEM PA RT NO. DESCRIPTIO N 1 5-8951 ASSEMBLY, Rear Tire & Rim (Inc ludes Item s 2, 3 & 4) ( 28", 30” 33” Models) 2 7-3584 TIRE, 16-6.
6 FRONT END, STEERING MANUA L No. 06128 R. E. RIDER SERIES 22 28 12 6 30 14 31 10 12 15 17 10 31 16 12 6 30 2 1 38 39 37 36 35 5 34 33 26 27 7 9 12 40 20 21 8 20 11 41 25 13 22 4 29 31 10 19 18 3 23 3.
7 42 43 44 FRONT END, STEERING ITEM PA RT NO. DESCRIPTIO N 1 5- 8030 STEERING W HEEL (f or 5/8” shaft) (includes item 2) 2 2-3781 LOGO, Steering W heel 3 1- 3862 PIN, 1/4" x 1-1/2" Roll 4 3- 8243 LATCH, Park ing Brak e 5 2- 2449 CABLE, Clutch/Brak e(54.
8 MA IN CA SE MANUA L No. 06128 R. E. RIDER SERIES 22 6 10 12 8 38 19 39 21 37 29 29 32 33 29 CONNECTS TO ITEM 15 ON PAGE 9 31 35 30 23 7 4A 53 50 13 9 34 2A 42 4C 22 5 34 53 52 36 50 53 49 1 21 38 39 19 48 47 35 53 50 11 50 31 36 51 50 2B 3 * * NOTE: The heads of these fasteners are located underneath the main case.
9 MA IN CA SE ITEM PA RT NO. DESCRIPTIO N 1 5-8044 W ELDMENT, Main Cas e -- 5-9202* W ELDMENT, Main Case 2A 3-0798 BUMPER, Rear ( 2) 2B 3-6367 BUMPER (1- piece) (33” Deck ) 3 3-7285 FENDER, Lef t Ha.
10 DIFFERENTIA L, R. H. FENDER MANUA L No. 06128 R. E. RIDER SERIES 22 17 1 29 16 16 18 19 20 35 33 14 13 11 28 27 12 31 30 9 10 3 21 32 27 28 15 6 7 23 22 8 6 25 26 4 34 5 2A 24 2.
11 DIFFERENTIA L, R. H. FENDER ITEM PA RT NO. DESCRIPTIO N 1 1-4401* COLLAR, Lock (Includes P.N. 9-0201, 5/16-18 x 5/16” Setscrew) 2 1- 8822* BALL BEARING, Axle (Right Hand Fender) 2A 1-2296 BEARING.
12 CHA IN CA SE, L. H. FENDER MANUA L No. 06128 R. E. RIDER SERIES 22 1 A SSEMBLY 24 13 34 31 6 7 14 2 12 10 9 8 11 25 29 4 9 10 31 34 16 15 5 5 26 33 19 A SSEMBLY 17 A SSEMBLY 3 18 22 20 21 23 25 27 .
13 CHA IN CA SE, L. H. FENDER ITEM PA RT NO. DESCRIPTIO N 1 5-2683 ASSEMBLY, Chain Case (Includes item s 2 thru 13, 15, 16, & 31 thru 35) 2 4-1136 CASE, Sprock et 3 2-8761 GASKET , Case Cover 4 1-1121 W ASHER, .
14 SMOOTH CLUTCH A SSEMBLY MANUA L No. 06128 R. E. RIDER SERIES 22 21 14 13 12 11 10 9 8 7 6 5 4 3 2 1 21 20 19 18 18 17 17 16 16 15 30 29 29 28 27 26 25 24 23 22 34 33 32 31 See page 6, Item 40.
15 SMOOTH CLUTCH A SSEMBLY ITEM PA RT NO. DESCRIPTIO N 1 5-3114 ASSEMBLY, Smooth Clutch (I ncludes Item s 2 thr u 6) 2 5-4243 HUB, Driven Disc ( assem bly) 3 5-3103 DISC, Driven (rubber tir e bonded t.
16 11 10 12 15 21 13 42 41 31 21 33 RA ILS & LIFT A RMS A SSEM BLY (Se e Pa g es 18 and 19 ) 16 24 40 2 (30” Deck) 39 8 35 17 4 5 3 9 44 19 36 20 SILHOUETTE OF SPINDLE A SS’Y. (See Page 21 For Parts Breakdown) 43 46 SILHOUETTE OF BLADE, ITEM 46 NOTE: Blade part number appears On blade.
17 CUTTING DECKS, DEFLECTORS ITEM PA RT NO. DESCRIPTIO N 1 7- 3434 COVER, Spindle 2 6- 1970 DECK, 28” (Painted w/decals) -- 6-1971 DECK, 30” (Painted w/decals) -- 6-1972 DECK, 33” (Painted w/decals) 3 6- 0480 KIT, Air Lif t (25”, 28” & 33” Deck ) (incl.
18 RA ILS, LIFT A RMS, CA M LIFT MANUA L No. 06128 R. E. RIDER SERIES 22 CA BLE, NO RE VERSE IN MOW (SEE PA GE 20, ITEM 11) 28 20 37 36 21 26 34 32 33 26 3 25 5 6 2 1 14 8 7 13 23 24 9 10 11 35 10 12 .
19 RA ILS, LIFT A RMS, CA M LIFT ITEM PA RT NO. DESCRIPTIO N 1 9-1503 HAIRPIN, 3/32” X 1-1/2” (2) 2 2- 8200 SW IVEL (2) 3 2-8728 HO OK, Chain (2) 4 9-0223 NUT , 5/16-24 Hex ( 2) 5 9-0854 NUT , 3/8.
20 BLA DE STOP PEDA LS ITEM PA RT NO. DESCRIPTIO N 1 7-3267 PEDAL, Blade Stop Control 2 3-5669 SPRING, Latching 3 1-5448 SPRING, Pedal 4 1-5495 BOLT, 3/8- 24 Shoulder, Grade 5 5 1-5446 BOLT, 3/8- 24 x 9/16" Shoulder 6 1-2063 W ASHER, Cone 13/32” I.
21 SPINDLE ITEM PA RT NO. DESCRIPTIO N 1 5-4531 ASSEMBLY , Spindle Housing (Includes Item s 2 T hru 13) 2 1-2491 RING, 1.85” Internal Retaining (2) 3 1-3313 BEARING, Spindle (2) 4 4-0460 W ELDMENT, Spindle Housing 5 1-0817 FITT ING, Lube ( for 3/16” diameter hole) 6 4-4785 SPINDLE, Rider (10.
22 14 16 17 31 32 * 8 33 13 34 13 8 14 14 30 38 15 39 20 11 29 36 28 24 23 24 24 12 37 27 26 25 21 6 19 7 5 10 9 18 7 19 6 35 3 2 1 22 4 * SEE PA GE 18, ITEM 38 BELTS, BRA KES, INTERLOCK MANUA L No .
23 BELTS, BRA KES, INTERLOCK ITEM PA RT NO. DESCRIPTIO N 1 4-3844 BELT, Drive (73.75” AA Section) (N ote: part num ber appears on belt) 2 7-4467 NUT, 3/4-16 Hex Jam , G rade 8 3 3-2027 W ASHER, 49/64” I.
24 DRIVE DISC A SSEMBLY ITEM PA RT NO. DESCRIPT ION 1 7-4187 W ELDMENT, 5.25” O.D. Drive Dis c (33" Models ) - 7-2658 W ELDMENT, 5.75” O.D. Drive Dis c (28”, 30” & 42” Models) 2 9-0132 SCREW , 3/8-16 x 3/8” Set (2) 3 1-0210 KEY, 1/4” Square x 2” MANUA L No .
25 FUEL TA NK & OPERA TORS SEA T ITEM PA RT NO. DESCRIPTIO N 1 2-8595 SEAT, Operator (12, 14.5 & 15HP Models ) (s hown) -- 2-8650 SEAT, Operator (9 & 10HP Models) (not s hown) 2 5-1905 ASSEMBLY , Fuel Tank (9 & 10HP Models ) (Inc ludes Item 3) -- 5-2435 ASSEMBY , Fuel Tank with Gauge (12, 14.
26 ENGINES & EXHA UST MUFFLER 9.0 RECOIL BRIGGS & STRATTON 28B702 1154-E1 14.5 ELECTRIC BRIGGS & STRATTO N C.A.R.B . 287707 1235-E1 15.0 ELECTRIC KOHLER CV15ST PS-41580 ITEM PA RT NO.
27 THROTTLE CONTROL ITEM PA RT NO. DESCRIPTIO N 1 2-2751 CONTROL, T hrottle ( 23.6” long) (Briggs Engines ) -- 7-4320 CONTRO L, Throttle ( 34.6” long) (Kohler Engine) 2 9-0539 SCREW , 1/4-20 x 1/2” Hex W asher Self -T ap (2) 3 3-3470 PLATE, T hrottle Control 4 9-0913 SCREW , #10-24 x 1/2” Hex W asher Self -T ap (T orx) ( 2) R.
28 DECA LS ITEM PA RT NO. DESCRIPTIO N 1 2-3996 DECAL, 28 Inch 2 2-3997 DECAL, 30 Inch 3 2-2991 DECAL, 33 Inch 4 7-1916 DECAL, Snapper 5 7-4481 DECAL, No Mow in Reverse 6 2-6831 DECAL, Danger (CPSC) 7 4-6218 DECAL, Height Cut 8 2-3980 DECAL, Back -up Recoil 9 2-3982 DECAL, OHV 10 2-9470 DECAL, Patent Num bers MANUA L No.
29 DECA LS ITEM PA RT NO. DESCRIPTIO N 1 4-6440 DECAL, Safety Instructions 2 4-6720 DECAL, Chute/Deflector W arning 3 1-5691 DECAL, Battery Caution 4 7-3335 DECAL, OPEI, Ride-On 5 2-9113 DECAL, Caution, Fuel (English) 6 1-2358 DECAL, Battery 7 1-6134 DECAL, Caution Tag R.
30 ELECTRICA L SYSTEMS (For 9HP Briggs Recoil Start) MANUA L No. 06128 R. E. RIDER SERIES 22 TO ITEM 9 TO ITEM 11 TO ITEM 1 (D, E, F) TO ITEM 1 (A) TO ITEM 3 H.
31 ELECTRICA L SYSTEMS (For 9HP Briggs Recoil Start) ITEM PA RT NO. DESCRIPTIO N 1 2-8606 INTERLOC K, Module 2 2-8386 HARNESS, Deck Interlock 3 1-8524 SW ITCH, Deck Interlock (NO ) 4 9-0880 W ASHER, 5.
32 ELECTRICA L SYSTEMS (For 10 & 12 HP BRIGGS) MANUA L No. 06128 R. E. RIDER SERIES 22 TO ITEM 8 TO ITEM 26 TO ITEM 6 (D, E, F) TO ITEM 6 (A) TO ITEM 11 TO ITEM 4 TO ITEM 5 G L K I J H H L L M K M G H L H. ENGINE GROUND I. ALTERNA TOR CHARGING WIRE J.
33 ELECTRICA L SYSTEMS (For 10 & 12 HP BRIGGS) ITEM PA RT NO. DESCRIPTIO N 1 6-0753 KIT, 12V Dry Charge Battery 2 1-8817 SOLENOID 3 2-2788 HARNESS, Starter W iring (Briggs) 4 7-3715 HARNESS, Ignit.
34 ELECTRICA L SYSTEMS (For 14.5 HP BRIGGS) MANUA L No. 06128 R. E. RIDER SERIES 22 N M G H L K I J M L K J. STARTER TERM INAL TO ITEM 5 TO ITEM 8 TO ITEM 27 TO CARBURETOR SOLENOID I.
35 ELECTRICA L SYSTEMS (For 14.5 HP BRIGGS) ITEM PA RT NO. DESCRIPTIO N 1 6-0753 KIT, 12V Dry Charge Battery 2 1-8817 SOLENOID 3 2-2788 HARNESS, Starter W iring (Briggs) 4 7-4406 HARNESS, Ignition W i.
36 ELECTRICA L SYSTEMS (For 15 HP KOHLER) MANUA L No. 06128 R. E. RIDER SERIES 22 M K L J G H M L K L L I. BA TTERY GROUND (See Inset, Page 37) ENGINE MOUNTING PLA TE H. ENGINE GROUND TO ITEM 5 TO I TEM 27 TO IT EM 4 TO I TEM 16 TO ITEM 8 TO IT EM 11 G.
37 ELECTRICA L SYSTEMS (For 15 HP KOHLER) ITEM PA RT NO. DESCRIPTIO N 1 6-0753 KIT, 12V Dry Charge Battery 2 1-8817 SOLENOID 3 1-9321 HARNESS, Starter W iring (Kohler) 4 7-4405 HARNESS, Ignition W iri.
38 WIRING SCHEM ATICS MANUA L No. 06128 R. E. RIDER SERIES 22.
39 WIRING SCHEM ATICS R. E. RIDER SERIES 22 MANUA L No. 06128.
40 WIRING SCHEMA TICS WIRING SCHEM A TIC FOR 14. 5 HP (Briggs Engine) MANUA L No. 06128 R. E. RIDER SERIES 22.
41 WIRING SCHEMA TICS R. E. RIDER SERIES 22 MANUA L No . 06128.
42 HA RDWA RE BA GS ITEM PA RT NO. DESCRIPT ION LOCATION -- 6-1872 HARDW ARE BAG (includes item s listed below) 1 1- 1024 PLUG, Oil Fill & Chec k ( 2) ................................................ page 11, item 18 & page 13, item 14 2 1- 3321 BUSHING , Tie Rod (2) .
43 NOTES.
44 Parts M anual for REAR ENGINE RIDER SERIES 22 SNA PPER REA R ENGINE RIDER A CCESSORIES* PA RT N O. DES CRIP TION OF KIT MODEL S US ED ON 6-0517 ............................. W heel W eight (8” W heels) ................................... All Rear Engine Riders 6-0601 .
An important point after buying a device Snapper W280922B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Snapper W280922B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Snapper W280922B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Snapper W280922B you will learn all the available features of the product, as well as information on its operation. The information that you get Snapper W280922B will certainly help you make a decision on the purchase.
If you already are a holder of Snapper W280922B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Snapper W280922B.
However, one of the most important roles played by the user manual is to help in solving problems with Snapper W280922B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Snapper W280922B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
