Instruction/ maintenance manual of the product SMC3PE Stow
Go to page of 42
© COPYRIGHT 2003, MUL TIQUIP INC . P AR TS AND OPERA TION MANUAL POR TO MIX MINI CONCRETE MIXER PLASTIC DRUM MODELS SMC3PE AND SMC3PB Re vision #0 (08/08/03) P ARTS DEP A RTMENT : 800-427-1244 F AX: .
.
STOW PORTO MIXER — PARTS & OPERATION MANUAL — REV. #0 (08/09/02) — PAGE 3 HERE'S HOW TO GET HELP PLEASE HA VE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING P AR TS DEP AR TMENT 800-4.
P A GE 4 —ST O W POR T O MIXER — P ARTS & OPERA TION MANUAL — REV . #0 (08/08/03) T ABLE OF CONTENTS Here's How T o Get Help ............................................ 3 T able Of Contents .............................................
STOW PORTO MIXER — PARTS & OPERATION MANUAL — REV. #0 (08/08/03) — PAGE 5 P ARTS ORDERING PR OCEDURES When ordering parts, please supply the following information: ❒ ❒ ❒ ❒ ❒ Dealer.
P A GE 6 —ST O W POR T O MIXER — P ARTS & OPERA TION MANUAL — REV . #0 (08/08/03) Accidental Starting AL W A YS place the circuit breaker or power ON/OFF switch in the OFF position when the pump is not in use. Respiratory Hazard AL W A YS wear approved respir ator y protection.
STOW PORTO MIXER — PARTS & OPERATION MANUAL — REV. #0 (08/08/03) — PAGE 7 ST O W PORT O MIXER— SAFETY MESSA GE ALER T SYMBOLS Accidental Starting AL W A YS place the engine ON/OFF switch in the OFF position, and remove the ignition key when the machine is not in use.
P A GE 8 —ST O W POR T O MIXER — P ARTS & OPERA TION MANUAL — REV . #0 (08/08/03) RULES FOR SAFE OPERA TION ■ AL W A YS refuel in a well-ventilated area, a wa y from spar k s and open flames. ■ AL W A YS use extreme caution when working with flammable liquids.
STOW PORTO MIXER — PARTS & OPERATION MANUAL — REV. #0 (08/08/03) — PAGE 9 ■ High T emperatures – Alwa ys stop engine and allow the engine to cool before adding fuel, oil or performing service and maintenance functions. Contact with hot components can cause serious burns.
P A GE 10 —ST O W PORT O MIXER — P ARTS & OPERA TION MANU AL — REV . #0 (08/08/03) Emergencies ■ AL W A YS know the location of the nearest fire extinguisher . ■ AL W A YS know the location of the nearest first aid kit . ■ In emergencies always know the location of the nearest phone or keep a phone on the job site .
STOW PORTO MIXER — PARTS & OPERATION MANUAL — REV. #0 (08/08/03) — PAGE 11 OPERA TION AND SAFETY DECALS Machine Safety Decals The ST O W POR T O MIXER is equipped with a number of saf ety decals. These decals are provided for oper ator saf ety and maintenance inf or mation.
P A GE 12 —ST O W PORT O MIXER — P ARTS & OPERA TION MANU AL — REV . #0 (08/08/03) OPERA TION AND SAFETY DECALS 6. check V-belt before starting mixer . AL WA YS 1. Read owner’s manual before operating mixer. ELECTRIC MOTOR Make sure power cord has been disconnected from power source before cleaning mixer .
STOW PORTO MIXER — PARTS & OPERATION MANUAL — REV. #0 (08/08/03) — PAGE 13 ST O W PORT O MIXER— SPECIFICA TIONS ) r o t o M c i r t c e l E & e n i g n E ( s n o i t a c i f i c e p S .
P A GE 14 —ST O W PORT O MIXER — P ARTS & OPERA TION MANU AL — REV . #0 (08/08/03) ST O W PORT O MIXER— DIMENSIONS (MIXER) Figure 1. Mix N' Go Mixer Dimensions.
STOW PORTO MIXER — PARTS & OPERATION MANUAL — REV. #0 (08/08/03) — PAGE 15 ST O W POR T O MIXER— DIMENSIONS (ELECTRIC MO T OR) Figure 2. Electric Motor.
P A GE 16 —ST O W PORT O MIXER — P ARTS & OPERA TION MANU AL — REV . #0 (08/08/03) ST O W PORT O MIXER— GENERAL INFORMA TION APPLICA TION This mixer is only intended for the production of concrete and mor tar . The mixer m ust be used f or its intended purposes and is not suitable for the mixing of flammable or explosive substances.
STOW PORTO MIXER — PARTS & OPERATION MANUAL — REV. #0 (08/08/03) — PAGE 17 ST O W POR T O MIXER— MIXER COMPONENTS Figure 4. Mixer Components S T N I H G N I X I M . 3 e l b a T S N O I T A C I L P P A X I M S O I T A R S E I T I T N A U Q H C T A B H C T A B .
P A GE 18 —ST O W PORT O MIXER — P ARTS & OPERA TION MANU AL — REV . #0 (08/08/03) Figure 5. Engine Controls and Components INITIAL SER VICING The engine (Figure 5) must be checked for proper lubrication and filled with fuel prior to operation.
STOW PORTO MIXER — PARTS & OPERATION MANUAL — REV. #0 (08/08/03) — PAGE 19 ST O W PORT O MIXER— ASSEMBL Y INSTRUCTIONS Assembly 1 . Remove the mixer drum and associated components from the packing container (Figure 6). Match the components against the parts list to make sure that they are all accounted fo r.
P A GE 20 —ST O W PORT O MIXER — P ARTS & OPERA TION MANU AL — REV . #0 (08/08/03) 6 . Tip mixer onto mouth as shown in Figure 10, and insert support stand into frame swivel point. 9 . Bef ore attempting to lift mix er , locate the fr ame locking clip .
STOW PORTO MIXER — PARTS & OPERATION MANUAL — REV. #0 (08/08/03) — PAGE 21 ST O W PORT O MIXER— PRE-INSPECTION (GASOLINE ENGINE) Figure 15. Engine Oil Dipstick (Removal) 3 . Insert and remove the dipstick without screwing it into the filler neck.
P A GE 22 —ST O W PORT O MIXER — P ARTS & OPERA TION MANU AL — REV . #0 (08/08/03) ST O W PORT O MIXER— INITIAL ST ART -UP (ELECTRIC MO T OR) CAUTION: CAUTION: CAUTION: CAUTION: CAUTION: DO NOT attempt to operate the mixer until the Saf ety , General Inf or mation and Inspection sections have been read and understood.
STOW PORTO MIXER — PARTS & OPERATION MANUAL — REV. #0 (08/08/03) — PAGE 23 ST O W PORT O MIXER— INITIAL ST ART -UP (GASOLINE ENGINE) Star ting the Engine ( BRIGGS & STRA TT ON ) 1 . Place the choke lever (Figure 21) in the CHOKE (CLOSED) position if star ting a cold engine.
P A GE 24 —ST O W PORT O MIXER — P ARTS & OPERA TION MANU AL — REV . #0 (08/08/03) ST O W PORT O MIXER— INITIAL ST ART -UP (GASOLINE ENGINE) Figure 26. Throttle Lever (Idle P osition) 2 . After the engine cools , mov e the throttle le v er to the ST OP position (Figure 27).
STOW PORTO MIXER — PARTS & OPERATION MANUAL — REV. #0 (08/08/03) — PAGE 25 ST O W PORT O MIXER— MAINTENANCE Maintenance Gearbox Oil Check 1. P osition the mix er on a le vel surf ace and place a suppor t bloc k under the front of the mix er frame as shown in Figure 29.
P A GE 26 —ST O W PORT O MIXER — P ARTS & OPERA TION MANU AL — REV . #0 (08/08/03) ST O W PORT O MIXER— MAINTENANCE (GASOLINE ENGINE) Reference manufacturer engine manual for specific servicing instructions. NOTE e l u d e h c S e c n a n e t n i a M e n i g n E .
STOW PORTO MIXER — PARTS & OPERATION MANUAL — REV. #0 (08/08/03) — PAGE 27 Maintenance P erf orm the scheduled maintenance procedures as definded by T able 6 and below: D AIL Y ■ Thoroughly remove dirt and oil from the engine and control area.
P A GE 28 —ST O W PORT O MIXER — P ARTS & OPERA TION MANU AL — REV . #0 (08/08/03) ST O W PORT O MIXER— PREP ARA TION FOR LONG -TERM ST ORA GE Mixer Storage For storage of the mixer for over 30 days, the following is recommended: z Drain the fuel tank completely , or add ST A-BIL to the fuel.
STOW PORTO MIXER — PARTS & OPERATION MANUAL — REV. #0 (08/08/03) — PAGE 29 NO TE P A GE.
P A GE 30 —ST O W PORT O MIXER — P ARTS & OPERA TION MANU AL — REV . #0 (08/08/03) ST O W PORT O MIXER— TR OUBLESHOO TING (ENGINE) G N I T O O H S E L B U O R T E N I G N E .
STOW PORTO MIXER — PARTS & OPERATION MANUAL — REV. #0 (08/08/03) — PAGE 31 ST O W PORT O MIXER— TROUBLESHOO TING (ENGINE/MIXER) G N I T O O H S E L B U O R T R E X I M . 8 E L B A T M O T P M Y S M E L B O R P E L B I S S O P N O I T U L O S .
P A GE 32 —ST O W PORT O MIXER — P ARTS & OPERA TION MANU AL — REV . #0 (08/08/03) How to read the marks and remarks used in this parts book. Items Found In the “Remarks” Column Serial Numbers-Where indicated, this indicates a serial number range (inclusiv e) where a par ticular par t is used.
STOW PORTO MIXER — PARTS & OPERATION MANUAL — REV. #0 (08/08/03) — PAGE 33 ST O W PORT O MIXER — SUGGESTED SP ARE P ARTS ST O W PORT O MIXER 1 TO 3 UNITS 1 to 3 Units Qt y . P/ N Description 2 ............ DM1840 ................ V -BEL T , A23 (ELECTRIC MO T OR) 2 .
P A GE 34 —ST O W PORT O MIXER — P ARTS & OPERA TION MANU AL — REV . #0 (08/08/03) ST O W PORT O MIXER — NAME PLA TE AND DECALS NAME PLA TE AND DECALS.
STOW PORTO MIXER — PARTS & OPERATION MANUAL — REV. #0 (08/08/03) — PAGE 35 ST O W PORT O MIXER — NAME PLA TE AND DECALS NAME PLA TE AND DECALS NAMEPLA TE AND DECALS. NO P AR T NO P AR T NAME QTY . REMARKS 1 DCL300 DECAL: W ARNING ST O W 1 2 DECAL: ST O W POR T O MIX .
P A GE 36 —ST O W PORT O MIXER — P ARTS & OPERA TION MANU AL — REV . #0 (08/08/03) MIXER ASSY . (PLASTIC DR UM) ST O W PORT O MIXER — MIXER ASSY .
STOW PORTO MIXER — PARTS & OPERATION MANUAL — REV. #0 (08/08/03) — PAGE 37 ST O W PORT O MIXER — MIXER ASSY . (PLASTIC DR UM) MIXER ASSY . (PLASTIC DR UM) NO . P AR T NO . P AR T NAME QTY . REMARKS 1 # DM3150 HEX HEAD BOL T M12 x 70 1 2 # DM1356 OIL FILLER PLUG M14 x 2 x 15L 1 3 # DM1912 HEX NUT M10 2 4 # DM355 HEX HEAD BOL T M8 x P1.
P A GE 38 —ST O W PORT O MIXER — P ARTS & OPERA TION MANU AL — REV . #0 (08/08/03) MIXER ASSY . (PLASTIC DR UM) ST O W PORT O MIXER — MIXER ASSY .
STOW PORTO MIXER — PARTS & OPERATION MANUAL — REV. #0 (08/08/03) — PAGE 39 MIXER ASSY . (PLASTIC DR UM) NO . P AR T NO . P AR T NAME QTY . REMARKS 3 1 DM1527 HEX NUT M10 1 2 3 2 DM1524 B O L T 1 2 3 3 DM1510 PLASTIC BARREL 1 3 4 DM1531 BLADE, BARREL 2 3 5 DM1613 HANDLE GRIP , RUBBER 2 3 6 DM1630 TOP C O VER CLAMP 2 3 7 DM1631 SCREW 5.
P A GE 40 —ST O W PORT O MIXER — P ARTS & OPERA TION MANU AL — REV . #0 (08/08/03) TERMS AND CONDITIONS OF SALE — P AR TS Effective: July 15, 2003 T erms and Conditions of Sale STOW Constr.
STOW PORTO MIXER — PARTS & OPERATION MANUAL — REV. #0 (08/08/03) — PAGE 41 NO TE P A GE.
P AR TS AND OPERA TION MANUAL HERE'S HOW TO GET HELP PLEASE HA VE THE MODEL AND SERIAL NUMBER ON-HAND WHEN CALLING P AR TS DEP AR TMENT 800-427-1244 or 310-537-3700 F AX: 800-672-7877 or 310-637-.
An important point after buying a device Stow SMC3PE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Stow SMC3PE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Stow SMC3PE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Stow SMC3PE you will learn all the available features of the product, as well as information on its operation. The information that you get Stow SMC3PE will certainly help you make a decision on the purchase.
If you already are a holder of Stow SMC3PE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Stow SMC3PE.
However, one of the most important roles played by the user manual is to help in solving problems with Stow SMC3PE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Stow SMC3PE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
