Instruction/ maintenance manual of the product RedAlert Single Channel Digital Security Recorder Swann
Go to page of 8
RedAlert™ If this device does not work when you first plug it in, do not take it back to the store. Contact the Swann Helpdesk using our fast e-mail service tech@swann.com.au or call us on one of the T oll-Free numbers shown on the back cover of this booklet.
RedAlert Digital Video Recorder Manual RedAlert Digital Video Recorder Manual RedAlert Digital Video Recorder Manual T able of Contents 2 15 T able of Contents Package Contents Using the SD Card Slot .
3 14 Came ra Power A dapto r (8V) Nigh t Hawk C amer a with S tand T roubleshooting Y our Wireless Outdoor Camera Poor Picture : Realign antennas until image quality improves, slightly adjust the position of the Camera or Receiver . Change the location of the Camera, or use a different height or angle to see if the image improves.
RedAlert Digital Video Recorder Manual RedAlert Digital Video Recorder Manual Changing Cameras and Viewing 2 Cameras PIP (Picture-in-Picture) The RedAlert DVR can display a wired and wireless camera in PIP mode. Note when viewing PIP only the main full screen image will be recorded.
3. Press OK to toggle Motion Detection ON or OFF . 4. Press Left/Right to highlight the desired option ( Delete One, Delete All, Format, Exit ) and then press OK to confirm the selection. 5. Press Left/Right to select Confirm (check) or Cancel (X) option, and then press OK to select.
2. Press the Left/Right buttons to highlight Capture Format Photo/A VI (Video). 11. Press Left/Right to highlight the Exit option and then press OK to return menu interface. SHORTCUT : T o exit or go to previous menus press the Menu button on the DVR 3.
RedAlert Digital Video Recorder Manual RedAlert Digital Video Recorder Manual TV Mode and Picture Quality Settings 1. Press the Menu button to enter menu interface. 2. Press Left/Right to highlight Setup and then press OK . 8. Press Left/Right in the Setup menu and highlight Motion Detect Sensitivity and press OK .
RedAlert Digital Video Recorder Manual RedAlert Digital Video Recorder Manual Advanced Motion Detection Setup 1. From the Setup menu, press the Left/Right buttons to highlight Motion Detection Area and press OK . 2. Press Left/Right to change the size of the area of detection (Large, Medium or Small Box) and then press OK .
An important point after buying a device Swann RedAlert Single Channel Digital Security Recorder (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Swann RedAlert Single Channel Digital Security Recorder yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Swann RedAlert Single Channel Digital Security Recorder - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Swann RedAlert Single Channel Digital Security Recorder you will learn all the available features of the product, as well as information on its operation. The information that you get Swann RedAlert Single Channel Digital Security Recorder will certainly help you make a decision on the purchase.
If you already are a holder of Swann RedAlert Single Channel Digital Security Recorder, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Swann RedAlert Single Channel Digital Security Recorder.
However, one of the most important roles played by the user manual is to help in solving problems with Swann RedAlert Single Channel Digital Security Recorder. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Swann RedAlert Single Channel Digital Security Recorder along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
