Instruction/ maintenance manual of the product DVTV5190F Teac
Go to page of 39
TV TV + + W ARRANTY INFORMA TION INSIDE. PLEASE READ OWNER S MANUAL IMPORT ANT! www.teac.com.au 51 cm colour t elevision D VTV 5190F D VTV 5190F.
TEAC PRODUCT W ARRANTY PERIOD Warranty T erms & Conditions Please read this warranty card. Keep your purchase receipt to enable you to proceed quickly in the event of a Warranty Service.
W ARRANTY PROCEDURES If you have any other queries regarding service or warranty please contact the TEAC Service Centre in your State. Please keep this information for your own records. Please refer to the owner s manual to ensure that you have followed the correct installation and operating procedures.
CONTENTS Before Operation Basic operation Safety and Precautions ...............................................................................2 Installation ............................................................................................
2 2 Safety and Precautions To ensure safe and reliable operation of the TV set ,please observe the following precaution, operation and maintenance. Attention: 1.Pay attention to the power supply cord before installing the TV set. Do not hang anything on the cord, and avoid treading on the cord.
Installation 1.First read carefully the relevant instructions in Safety and precautions . 2.Place the TV set in a room where there is no direct sunligh t on it. Any light reflecting from the screen will cause fatigue of your eyes. 3.Use gentle indirect lighting for comfortable watching.
Function Buttons and External Sockets Front panel the TV set Front panel the TV set Rear panel of the TV set VIDEO L-AUDIO-R TV/DVD MENU V- V+ P- P+ Video R/LAudio The DVD Player Power Indicator Signa.
Using the Remote Control DVD/TV OPEN/CLOSE NEXT NEXT PREV PREV REV REV FWD FWD STOP STOP PAUSE/STEP PAUSE/STEP D.MENU D.MENU P+ P+ P- P- PLAY/ENTER PLAY/ENTER VOL+ VOL+ VOL- VOL- SETUP SETUP CAPTION C.
4 AUTO BG Switching on/ off the TV set Switching the TV set on/ off Switching the TV set on/ off 2 If the indicator is lighting in red, press the button on the remote control again. Note 1 When you can't operate the TV set with a remote control, you can turn it pressing the P+ on the TV set (Child Lock must be turned off).
Watching TV Watching TV programs How to select TV program Select the desired program Select the desired sound You can watch a TV program on a channel which has been tuned to a broadcast. 1 Using number buttons 2 Using the P+/- buttons Press the P+ button to increase channel number.
18 AUTO BG 8 AUTO BG 18 AUTO BG Watching TV continued Press the SW AP button to select the channel you were watching previously . Auto scan function scans through all programs in memory including those with "skip" set to "off" (see "Program skip" on page 12).
AUTO SEARCH 152.25MHz Searching channel This TV set has three methods to set the channels, which are respectively full automatic, semi automatic and manual fine tune. - In this section, how to use the remote control to set the channel is explained. Y ou can also use the buttons on the TV set to set channel.
1 AUTO BG 6 Searching channel Continued Semi-automatic search Semi-automatic search 1 Press the P+/- buttons or the PROGRAMME NUMBER (0-9) to choose the desired channel (e.g. Channel 1). 3 buttons to select "SEARCH". Press the P+/- 4 Press the VOL- button to search downwards or the VOL+ button to search upwards.
5 FINE TUNE 152.25MHz Searching channel Continued Manual fine tune Manual fine tune 3 buttons to select " FINE TUNE". Press the P+/- 4 Use the Vol-/+ buttons to manually fine tune the station until the best picture and sound are obtained. 1 AUTO BG If the picture and/or sound are poor, try using the FINE TUNE feature.
Searching channel Continued Program skip Program skip 3 buttons to select "SKIP". Press the P+/- 4 Press the VOL-/+ buttons to turn the SKIP function "ON". 5 Press the EXIT button to close the menu. When you use the P / buttons to select channel, this channel will be skipped.
Multiple picture modes How to select picture modes You can quickly select the desired picture mode from four preset modes and one customized mode. Convenient picture and so und control functions Press the P .STD button to select the desired picture quality.
Black stretch and noise reduce Convenient picture and so und control functions Continued How to select BLACK STRETCH How to select NOISE REDUCE 1 Press the MENU button. The MAIN MENU will appear with the PIC (picture) ico n fla shing.Press the MENU button a fu rther 2 times until the FUN (function) icon is f lashing.
Convenient picture and so und control functions Continued MUTE Sound mute 1 Press the MUTE button on the remote control to turn off the sound. MUTE will appear on the top left of the display. 2 Press MUTE again to turn the sound back on. Mute and Fade Fade 3 Press the .
On/off timer On-off time setting is cleared after timer operates. Clock setting Time functions Clock setting and timer on/off functions 1 Press the TIME button, and the TIME menu appears on the screen.
Sleep timer and program preset Sleep timer REMIND PROG function 0 10 20 170 180 2 Press the P+/- buttons to select "SLEEP TIME ". 2 Press the P+/- buttons to select "REMIND TIME", .
NO SIGNAL Set up function Screen saver and Calendar How to start screen saver function 1 Press the MENU button. The MAIN MENU will appear with the PIC (picture) ico n fla shing. Press the MENU button a fu rther 2 ti mes until the FUN (function) ic on i s flashing.
AVL Set up function Continued 2 Press the P+/- . button to select "A VL" 3 Press . VOL-/+ button to turn the A VL function "ON" or "OFF" AVL function BACKGROUND BLACK STRETCH NOISE REDUCE FADE AVL BACKGROUND BLACK STRETCH NOISE REDUCE FADE AVL 1 Press the MENU button.
Organise functions ORGANISE ORGANISE This feature enables TV programmes that may be on a wrong program number to be moved to another number. This feature is very useful when Automatic Search Tuning has been used because programmes are stored in the order they are found, which is usually not the desired order.
Setting the Lock This TV set can set a four digit password, the original one is 0000, if you want to reset it, please follow the instructions below . 3 Press the button and input a four-digits password. PROGRAM NUMBER 0-9 LOCK SET CHANGE PW. TUNING LOCK OFF PRESET PROG 1 AV LOCK OFF CHILD LOCK OFF MAX VOLUME 50 UNLOCK CHANGE PW.
Setting the Lock(continued) Setting the Lock Setting the Lock There are TUNING LOCK,A V LOCK, and CHILD LOCK, etc,you can set it due to your need. 1 Press the H.LOCK button, the screen will show as the form on the right. 2 Press the PROGRAM NUMBER 0-9 button 0 for four times(or input the password you set), and enter the LOCK menu.
Preparations Press the DVD/TV button on the remote control or the TV to turn on the DVD player. 1. Press OPEN/CLOSE to open the disc tray, place a disc on the disc tray. There are two different disc sizes. Place the disc in the correct guide on the disc tray.
PROGRAM When playing discs, press "PROGRAM" to enter program mode. Starting with program number "01" highlighted, press the digit buttons to select the title and chapter number that you want. When finished move the cursor to select "ST ART" .
Users can record pictures from digital camera or scanner onto a CD-R or CD-RW disc using a personal computer, CD recording drive and suitable software.
Kodak Picture CD A Kodak Picture CD has the size and shape of a regular CD. Y ou can order a Kodak Picture CD simply by checking the box on the photofinishing envelope when you drop off a roll of film.
DVD System Setup DVD System Setup General Setup Process SETUP 1.Press the SETUP button, the General Setup Page,Preference Page will be displayed in turn. 2.Press CH+/- b to select, the item, then press to enter the submenu. 3.Press CH+/- bu to select then press PLA Y/ENTER to confirm.
DVD System Setup(Continued) DVD System Setup General Setup Page CAPTIONS: This functionallows you to display or hide the caption. SCREEN SAVER: If the screen saver is on,then there will be an animated picture of DVD on the screen whenever the DVD player is idle for more than 3 minutes .
The Preference Page is only available when there is no disc in the player. These settings are applied consistently to all discs which are inserted and played. DVD System Setup(Continued) DVD System Setup Preference Page SETUP TV TYPE: This player supports different TV output, including MULTI(Auto), NTSC, and PAL systems.
The following discs can be played: Playable Discs You cannot play discs other than those listed above. You cannot play non-standard discs, even if they may be labelled as above. The performance of CD-R or CD-RW discs depends on the way the disc is prepared - see under "Special function playback - JPEG disc playback".
Disc Protection and DVD Characteristics Compare DVD disc with other discs: DVD LD SVCD VCD CD Encode method Digital/MPEG Analog Digital Digital/ MPEG Digital Capacity 650MB 650MB 650MB 133 minutes 242.
Connecting the TV set to the other video and audio equipment The figure below shows hot to connect external equipment using A V signals. There is also an A V input on the side of your television. Use the Left Audio input (white terminal on the TV), if you are connecting equipment with mono sound.
Troubleshooting guide BREAKDOWN PHENOMENON PICTURE SOUND CHECKING The aerial direction and connection Ensure that the power supply is connected to the TV set and turned on. Also ensure that the TV set is not in "Listen Mode" or that the brightness and contrast are not turned down.
The player is in pause, s low-motion, fast forward o r reverse m ode. Press the P LA Y b utton t o return t o normal play mode. Check the v olume control.
Specifications Specifications PAL, NTSC PLA YBACK AC 240V 50Hz BG 80W Picture tube Accessories Model Colour system Sound system Sound output power Power requirements Power consumption Dimension 2X2W 1.
03 0090505468 TEAC CORPORA TION 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan Phone: (0422) 52-5081 TEAC AUSTRALIA PTY .,LTD . A.B.N.:80 005 408 462 HEAD OFFICE 280 William Street, Melbourne, V.
An important point after buying a device Teac DVTV5190F (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Teac DVTV5190F yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Teac DVTV5190F - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Teac DVTV5190F you will learn all the available features of the product, as well as information on its operation. The information that you get Teac DVTV5190F will certainly help you make a decision on the purchase.
If you already are a holder of Teac DVTV5190F, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Teac DVTV5190F.
However, one of the most important roles played by the user manual is to help in solving problems with Teac DVTV5190F. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Teac DVTV5190F along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
