Instruction/ maintenance manual of the product MC-DX220i Teac
Go to page of 16
Z This appliance has a serial number located on the rear panel. Please record the model number and serial number and retain them for your records. Model number Serial number TEAC CORPORATION 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan Phone: (0422) 52-5081 TEAC AMERICA, INC.
31 Specifications AMPLIFIER section Output Power (L+R) . . . . . . . . . . . . . . . . . . . . . . . 5 W + 5 W Output Power (Subwoofer) . . . . . . . . . . . . . . . . . . . . . . 15 W Input Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . .
30 If you have problems with your system, look through this chart and see if you can solve the problem yourself before calling your dealer or TEAC service center. General No power e Check the connection to the AC power supply. Check and make sure the AC source is not a switched outlet and that, if it is, the switch is turned on.
29 Press the SKIP button ( . / / ) to select a source (TUNER, CD or iPod), and then press the TIMER button. 6 Press the SKIP button ( . / / ) to set the volume, and then press the TIMER button. 7 The clock and the TIMER indicator are displayed. The unit will turn on and off at the specified time every day.
28 Setting the Timer < The unit can be programmed to turn on and off at a specified time. < Adjust the clock before setting the timer. Press and hold the TIMER button until the TIMER indicator and “ON” appear on the display. 1 The “hour” value starts flashing.
27 Setting the Clock If the power switch of the subwoofer turned off, the settings kept in memory (clock, preset stations, timer setting) will be erased. If the unit is on, press the STANDBY/ON switch to turn it standby 1 Press the TIME SET button once more.
26 Connect the PHONES jack (audio output jack) of a portable audio player to the AUX IN jack of the MC- DX220i using the supplied stereo mini plug cable. 1 Listening to an Exter nal Sour ce Play the source, and adjust the volume using the VOLUME buttons of the MC-DX220i and the audio player.
25 The Radio Data System (RDS) is a broadcasting service which allows stations to send additional information along with the regular radio programme signal. RDS works on the FM waveband in Europe only. Tune in an FM RDS station (see steps to of page 23).
24 Pr eset T uning You can store FM and AM stations into preset channels 1 to 10 respectively. If the power switch of the subwoofer turned off, the settings kept in memory (clock, preset stations, timer setting) will be erased. Tune in a station you want to listen to (see steps to of page 23).
23 Listening to the Radio 1 2 3 Press the FUNCTION button to select “TUNER”. 1 < You can also use the FM/AM button to select “TUNER”. Press the FM/AM button to select a band. 2 Select the station you want to listen to (auto selection). 3 Hold down the TUNING Up or Down button until the frequency display begins to change.
22 Every time the REPEAT button is pressed, the mode is changed as follows: When a CD is loaded: When a MP3 disc is loaded. < If one of the following buttons is pressed, repeat mode will be cancele.
21 T o check the programmed or der In the stop mode, press the MEMORY button repeatedly. The track number and program number will be shown on the display. T o add a track to the end of the program In the stop mode, press the MEMORY button repeatedly until “00” appears on the display.
20 MEMORY FUNCTION Up to 64 tracks can be programmed in the desired order. Press the FUNCTION button to select “CD”. 1 Press the MEMORY button. 2 “MEMORY” lights up in the display. < To cancel the program mode, press the Stop button ( H ). Press the Skip button ( .
19 Search for a track in a folder Press the MP3 button twice. The name of folder is displayed. < MP3 tracks recorded out of folders are in the “ROOT” folder. Press the SKIP button ( . or / ) to find the folder that the track you want to listen to is included.
18 Sear ch Mode (MP3 only) Initial letter of track name Track name Search for a name of track You can select the track by searching for its name. Press the MP3 button once. An alphabet (initial letter of a track name) and a track name are displayed. 1 Press the PLAY/PAUSE button ( G / J ).
17 T o suspend playback temporarily (pause mode) Press the Play/Pause button ( G / J ) during playback. Playback stops at the current position. To resume playback, press the Play/Pause button ( G / J ) again. T o stop playback Press the Stop button ( H ) to stop playback.
An important point after buying a device Teac MC-DX220i (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Teac MC-DX220i yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Teac MC-DX220i - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Teac MC-DX220i you will learn all the available features of the product, as well as information on its operation. The information that you get Teac MC-DX220i will certainly help you make a decision on the purchase.
If you already are a holder of Teac MC-DX220i, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Teac MC-DX220i.
However, one of the most important roles played by the user manual is to help in solving problems with Teac MC-DX220i. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Teac MC-DX220i along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
