Instruction/ maintenance manual of the product EM-31061A TEC
Go to page of 14
TEC TEC TEC TEC TEC Digital Scale SL-47-N-1 SERIES Document No. EM1-31061A TEC CORPOR ATION.
EM-31061A TABLE OF CONTENTS Page 1. INTRODUCTION .................................................. l- 1 2. APPLICABLE MODEL .............................................. 2- 1 3. SPECIFICATIONS ................................................. 3- 1 4.
EMl-3106lA 1. INTRODUCTlON I. INTRODUCTION 1. INTRODUCTION We thank you very much for purchasing the TEC Digital Scale SL47-N-1 Series. This series has been designed with TEC reliability. Should you have any questions concerning the scale, please refer to this manual.
1. INTRODUCTION EMl-31061A 1. INTRODUCTION Safety Precautions This Owner’s Manual and the products (machines) which you have purchased contain indications which should be observed in order to use the machines safely and prevent harm to yourself and others and damage to property.
EMl-31061A 1. INTRODUCTION 1. INTRODUCTION Prohibited immediately turn off the power switches and disconnect the power s from the outlet. Then, n If foreign objects (metal fragments, water, liquids) e.
1. INTRODUCTION EMl-31061A 1. INTRODUCTION Dixonnecl the plug. n When moving the machines, be sure to first unplug the power cords. Moving the machines with the power cords plugged in may damage the cords and cause fire or electric Diiconnect the plug.
EMl-31061A 2. APPLICABLE MODEL 2. APPLICABLE MODEL 2. APPLICABLE MODEL Model name description L: lb base scale Blank: kg base scale I I Series name -+-.I Interface T: TEC ECR I/F I : IBM ECR I/F (Serial) P: IBM ECR I/F (Parallel) N: NCR ECR I/F R: RS-232C I/F 3 : r- us - Destination code US: U.
EMl-31061A 3. SPEClFlCATlONS 3. SPECIFICATIONS 3. SPECIFICATIONS Item Maximum Capacity Minimum Scale Division Display Range Display (Weight) Power Requirement Current Consumption Operating Temperature Relative Humidity Dimensions (approx.) Built-in Type Remote Display Type Display unit Weight (approx.
EMl-31061A 4. OVERVIEW 4. OVERVIEW 4. OVERVIEW NOTE: The appearance of the scale (platter, level gauge, display, etc.) varies according to model. l Built-in Type Platter 7 ZERO Lamp Lights when the ze.
EMl-31061A 5. LEVEL ADJUSTMENT 5. LEVEL ADJUSTMENT 5. LEVEL ADJUSTMENT Set the scale on a stable and level surface. Level the scale by turning the adjustable legs so that the air bubble is inside the center circle. NOTE: The attached position of fhe level gauge differs according to model.
EMl-31061A 6. INSTALLING THE REMOTE PIPE 6. INSTALLING THE REMOTE PIPE 2. Attach the joined plate to the remote display using screws 0 (FL-4 x 6). 3. Pass the remote cable through the remote pipe. 4. Attach the remote pipe to the joined plate using screws 0 (6-4 x 4).
EMl-31061A 7. CONNECTING THE INTERFACE CABLE AND REMOTE CABLES 7. CONNECTING THE INTERFACE CABLE AND REMOTE CABLES 7. CONNECTING THE INTERFACE CABLE AND REMOTE CABLES I WARNING: Disconnect the power cord before connecting the cables. I 1. Remove the blind plate (right side).
EMl-31061A 8. TROUBLESHOOTING 6. TROUBLESHOOTING 8. TROUBLESHOOTING I Problems I Solution ‘I - - - - - ” is displayed at power on. l Was the power turned ON when something was on the platter? + Make sure nothing is on the platter and turn the power on again.
TEC TEC CORPORATION 3ti* PRINTED IN JAPAN EMl-31061A 9706lOOOt6).
An important point after buying a device TEC TEC EM-31061A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought TEC TEC EM-31061A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data TEC TEC EM-31061A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, TEC TEC EM-31061A you will learn all the available features of the product, as well as information on its operation. The information that you get TEC TEC EM-31061A will certainly help you make a decision on the purchase.
If you already are a holder of TEC TEC EM-31061A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime TEC TEC EM-31061A.
However, one of the most important roles played by the user manual is to help in solving problems with TEC TEC EM-31061A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device TEC TEC EM-31061A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
