Instruction/ maintenance manual of the product TEL9901G Tenda
Go to page of 8
Copyright Statement is the registered trademark of Shenzhen Tenda Technology Co., Ltd. Other trademark or trade name mentioned herein are the trademark or registered trademark of the company. Copyright of the whole product as integration, including its accessories and software, belongs to Shenzhen Tenda Technology Co.
1 Table of Contents 1 Product Description ..................................... 1 1.1 ............................................ 1 Unpacking 1.2 .................................... 1 Main Features 1.3 .................................. 3 Specifications 1.
1 1 Product Description Thanks for purchasing TENDA TEL9901G 10/100/ 1000M auto-Negotiation Gigabit PCI LAN Adapter. TEL9901G is fully compliant with PCI2.2, support ACPI power management. TEL9901G is Auto- Negotiation, supports three transfer rate of 10Mbps, 100Mbps and 1000Mbps.
2 is your best choice for realizing Gigabit Network to your desktop. Compliant with IEEE802.3, IEEE802.3u, IEEE802.3ab standard; Supports transfer rate of 10Mbps, 100Mbps, 1000Mbps and duplex of 10/100M under full duplex mode, half duplex, 1000M under full duplex mode.
3 LINUX2.2X/2.4X/2.6X, MAC OS and Free BSD etc. 1.3 Specifications Main Features Protocol IEEE802.1p IEEE802.1Q IEEE802.3 IEEE802.3u IEEE802.3ab IEEE802.
4 One “10” LED Indicates status of 10Mbps Link/Act Note: When the Link/Act LED is ON, it i ndicates that TEL9901G is connected to the network successfully at the respective transfer rate. When the Link/Act LED is blinking, it indicates that TEL9901G is transmitting data.
5 2 Hardwar e Installation Please install TEL9901G according to the following steps: Shut down your computer, unplug its power cord and remove the chassis cover. Insert the contact edge of the DGE-530T card into the connector of any available PCI Bus Master expansion slot.
6 3 Driver Installation Please install the driver according to the following steps: Start PC, and insert the CD attached in the packing. The computer would run the CD automatically and display Tenda Setup on the screen. (If the computer is not running the CD automatically, please double click the CD and run “TendaSetup.
An important point after buying a device Tenda TEL9901G (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Tenda TEL9901G yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Tenda TEL9901G - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Tenda TEL9901G you will learn all the available features of the product, as well as information on its operation. The information that you get Tenda TEL9901G will certainly help you make a decision on the purchase.
If you already are a holder of Tenda TEL9901G, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Tenda TEL9901G.
However, one of the most important roles played by the user manual is to help in solving problems with Tenda TEL9901G. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Tenda TEL9901G along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
