Instruction/ maintenance manual of the product Bollards 10EMSQ475X BEA
Go to page of 4
2 Specications BOLLARD MOUNTING POST USER’S GUIDE MOUNTING POST FOR PUSHPLA TES 1 Description The Bollard (Black-10BOLLARDBLK, Bronze-10BOLLARDBRZ & Silver-10BOLLARDSL V) is used for mounting pushplates that activate automatic doors.
2 Attach Mounting Bracket Using Expansion Anchors - Existing Concrete 1. Mark and drill 3/8” diameter hole in four locations. 2. Hammer in and set anchor in four hole locations. 3. Install and tighten nuts to secure mounting bracket. 3 Precautions Shut off all power before attempting any wiring procedures.
5 Installation (Continued) 3 Attach Mounting Bracket Using ‘L ’ Shaped Anchors - New Concrete 1. Pour concrete at least 6 inches deep. 2. Insert anchors into curing concrete. Leave at least 1 inch exposed. 3. Once concrete has cured attach anchor and tighten nuts onto mounting bracket.
5 Installation (Continued) 6 Attach T ransmitter CAUTION: IF THE TRANSMITTER IS ALLOWED TO HANG DOWN INSIDE THE BOLLARD, ERRA TIC OPERA TION MA Y OCCUR. 1. If using the transmitter for this application, attach transmitter to mounting tray with velcro pad included in the package.
An important point after buying a device BEA Bollards 10EMSQ475X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought BEA Bollards 10EMSQ475X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data BEA Bollards 10EMSQ475X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, BEA Bollards 10EMSQ475X you will learn all the available features of the product, as well as information on its operation. The information that you get BEA Bollards 10EMSQ475X will certainly help you make a decision on the purchase.
If you already are a holder of BEA Bollards 10EMSQ475X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime BEA Bollards 10EMSQ475X.
However, one of the most important roles played by the user manual is to help in solving problems with BEA Bollards 10EMSQ475X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device BEA Bollards 10EMSQ475X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
