Instruction/ maintenance manual of the product FALCON BEA
Go to page of 7
75.5351.02 EN 20080317 (75.5350) Page 1 of 7 FALCON & FALCON XL USER'S GUIDE MOTION SENSORS FOR INDUSTRIAL DOORS • FALCON : for high mounting • FALCON XL : for low mounting Technology : Microwave and microprocesso r Transmitter frequency : 24.
75.5351.02 EN 20080317 (75.5350) Page 2 of 7 To remove or to insert the cable: • Unscrew the retaining nut; • Pass the cable through the grommet and the retaining nut.
75.5351.02 EN 20080317 (75.5350) Page 3 of 7 FALCON (Mounting height: 16.5 feet) The sensing fields here on the right correspond to the following adjustments: • tilt angle: 15°, 30°, 45° • sensitivity: 9.
75.5351.02 EN 20080317 (75.5350) Page 4 of 7 1. DESCRIPTION OF THE INFRARED REMOTE CONTROL • Open the battery compartment at the back of the remote control; • Insert two AAA batteries supplied with the remote control as shown beside; • Close the batteries compartment.
75.5351.02 EN 20080317 (75.5350) Page 5 of 7 During an adjustment ses sion each parameter ma y be ch ecked or changed at an y time in the follow ing way: PA RA ME TER KEY USER'S ACTIONS CHECK VALUES Press the K ey (5,6,7,8,11) corresponding to the parameter to be checked a nd then press the CHECK VA LUES Key (9).
75.5351.02 EN 20080317 (75.5350) Page 6 of 7 DETECTION MODE Press the DETECTION MODE key (7). Use the NUMBER Keys 1-3 ( 1) to select the required mode : Key 1: bi-directional Key 2: unidirectional ap proach Key 3: unidirectional depart Detection mode: Press the REJECTION MODE key (8).
75.5351.02 EN 20080317 (75.5350) Page 7 of 7 During the manual adjustment session: • Each press on the right button increases the number of the displayed parameter by one unit; • Each press on the left button increases the value of the displayed parameter by one unit.
An important point after buying a device BEA FALCON (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought BEA FALCON yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data BEA FALCON - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, BEA FALCON you will learn all the available features of the product, as well as information on its operation. The information that you get BEA FALCON will certainly help you make a decision on the purchase.
If you already are a holder of BEA FALCON, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime BEA FALCON.
However, one of the most important roles played by the user manual is to help in solving problems with BEA FALCON. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device BEA FALCON along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
