Instruction/ maintenance manual of the product 32LV733DG Toshiba
Go to page of 57
19/22/26/32AV73*G and 32/40LV73*G DIGITAL Series 19/22/26/32A V73*G /A V73*G1 and 32/40L V73*G DIGIT AL Series.
Contents Safety Precautions ....................................... 3 Installation and important information ....... 4 The remote control ....................................... 6 Inserting batteries and effective range of the remote .................
REGZA-LINK Controls ................................ 36 Equipment Control.................................. 36 Input Source Selection ........................... 37 Pass-Through Control ............................ 37 REGZA-LINK Menus ................
English SETTING UP 3 Safety Precautions This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken to obtain the best results and for safety to be assured. Please read the points below for your own safety .
English SETTING UP 4 W here to install Please tak e note Installation and important infor mation Locate the television away from direct sunlight and strong lights, soft, indirect lighting is recommended for comfortable viewing. Use curtains or blinds to prevent direct sunlight falling on the screen.
English SETTING UP 5 SYMBOL SYMBOL DEFINITION DANGEROUS VOL T AGE: T he lightning a sh with arrowhe ad symbol within an equilateral triangle is intended to a lert the u ser to the presence of un-i .
English SETTING UP 6 The remote contr ol Simple at-a-glance reference of your remote control. 1 2 3 4 7 8 10 14 16 18 20 5 6 9 12 11 13 15 17 19 1 For On/Standby mode 2 T o select input from external .
English SETTING UP 7 Inser ting batteries and effectiv e r ange of the remote Remove the back cover to reveal the battery compartment and make sure the batteries are inserted the right way round. Suitable battery types for this remote are AAA, IEC R03 1.
English SETTING UP 8 Connecting external equipment Before connecting any external equipment, turn off all main power switches. If there is no switch remove the mains plug from the wall socket. Connect the power cord into the AC-IN socket found at the back of the TV .
English SETTING UP 9 Aerial cables: - - - - - - - - - - - - - - - - - Connect the aerial to the ANT socket on the rear of the television. If you use a decoder and/or a media recorder , it is essential that the aerial cable is connected through the aerial socket on the decoder and/ or on the media recorder to the TV .
English SETTING UP 10 REGZA-LINK Connections The basic functions of connected audio/video equipment can be controlled using the television's remote control if a REGZA-LINK compatible device is connected.
English SETTING UP 11 C o n n e c t i n g a n H D M I ® o r D V I d e v i c e t o t h e H D M I i n p u t The HDMI input on your television receives digital audio and uncompressed digital video from an HDMI source device, or uncompressed digital video from a DVI (Digital Visual Interface) source device.
English SETTING UP 12 Model 26/32/40 1 2 HDMI cable HDMI device (not supplied) HDMI out T o view the HDMI device video, press to select the mode..
English SETTING UP 13 D VI de vice to the HDMI Input Connect an HDMI-to-DVI adapter cable (HDMI type A connector) to HDMI1 terminal and audio cables to the PC/HDMI1 Audio socket (see illustration). • The recommended HDMI-to-DVI adapter cable length is 6.
English SETTING UP 14 Model 26/32/40 1 2 PC/HDMI 1 (AUDIO) DVI device HDMI-to-DVI adapter cable Audio cable for HDMI to television connection (not supplied) (not supplied) NOTE: T o ensure that the HD.
English SETTING UP 15 Connecting a computer With the HDMI connection, you can watch your computer ’s display on the television and hear the sound from the televisions speakers. T o connect a PC to the HDMI ter minal When connecting a PC to the HDMI terminal on the television, use an HDMI-to-DVI adapter cable and analogue audio cables.
English SETTING UP 16 Acceptable Video signals through HDMI terminals Format Resolution Refresh Rate H. Frequency P i x el C l o c k VGA 640 x 480 60.000Hz 31.500kHz 25.200MHz 59.940Hz 31.469kHz 25.175MHz 72.809Hz 37.861kHz 31.500MHz 75.000Hz 37.500kHz 31.
English SETTING UP 17 Using the controls While all the necessary adjustments and controls for the television are done using the remote control, the buttons on the television may be used for some functions. NOTE: COMMON INTERF ACE (CI) The common interface is for a Conditional Access Module (CAM) .
English SETTING UP 18 Switching on Before switching on the television, make sure to connect the aerial cable, and select TV as the input source. If the RED LED is off, check that the mains plug is connected to the power supply . If the picture does not appear , press on the remote control, it may take a few seconds to appear .
English 19 TUNING THE TELEVISION T uning the television Before switching on the television, put your decoder and media recorder to Standby if they are connected. Make sure to connect the aerial cable, and select TV as the input source. T o set up the television, press the buttons on the remote control as detailed on page 6.
English 20 TUNING THE TELEVISION Setting the programmes NOTE: When Channel Block is activated the 4-digit password is needed to en ter the Channels submenu under SETUP menu. Auto Scan The Auto Scan will completely re-tune the television and can be used to update the channel list.
English 21 TUNING THE TELEVISION Update Scan Search the new channels that are not in the programme list. Press MENU and press ◄ or ► to select SETUP . Press ▼ to highlight Channels and press ► or . Select Update Scan and press to start scanning.
English 22 TUNING THE TELEVISION Select Analogue Manual Scan and press ► or to conrm it. Auto Scan Update Scan Analogue Manual Scan Favorite Nework Select Channel Skip Channel Sort Channels Chann.
English 23 TUNING THE TELEVISION Channel Sor t Change the order of the programme list. Select Channels from the SETUP menu. Highlight Channel Sort and press ► or to enter . Press ▲ or ▼ to select the rst channel you want for sorting and then press to mark it.
English 24 CONTROLS AND FEA TURES Analogue Channel Fine T une When the reception is poor , you can use this function to do the ne tuning. In the SETUP menu, press ▼ to highlight Channels and press ► or to enter . Press ▼ to highlight Analogue Channel Fine T une and press to enter .
English 25 CONTROLS AND FEA TURES General controls Selecting prog ramme positions T o select a programme position, press the numbered buttons on remote control. The programme positions can also be selected by pressing P and P . T o display on-screen information, i.
English 26 CONTROLS AND FEA TURES Sur r ound Sound This fu nction en riches ( expanding and dee pening) the sound quality . In the SOUND menu, press ▼ to select Surround Sound . Press ◄ o r ► to switch func tion On or Off. Stable Sound ® Stable Sound reduces the volume level differences between channels.
English 27 CONTROLS AND FEA TURES 4 Make sure the Speaker Out option is set to On . Pres s ▼ to highl ight V olume option , and press ◄ or ► to adjust the volume .
English 28 CONTROLS AND FEA TURES Widescreen viewing Depending on the type of broadcast being transmitted, programmes can be viewed in a number of formats. 4:3 Use this setti ng to view a true 4:3 broadcast. Wide Use this setti ng when watchin g a widescreen DVD , widescreen vid eo tape or a 16:9 broa dcast (when ava ilable).
English 29 CONTROLS AND FEA TURES PC Normal “Dot by Dot” i s a non-scaling display. Depending on t he input signal format, the picture is displayed with side panels and/or bars at the top and bot tom (i.e. VGA inpu t source). Dot by Dot Use this setti ng for PC connec ted via HDMI or RGB/PC terminal when r eceiving PC signal form at.
English 30 CONTROLS AND FEA TURES Picture contr ols Picture Mode Y ou can adjust the best picture appearance by selecting the preset value in picture mode based on the programme category .
English 31 CONTROLS AND FEA TURES Press ◄ or ► to select Cool, Medium, W arm or User to suit your preference. Colour Temperature User 0 0 0 R Gain G Gain B Gain Colour Temperature Select Back Exit EXIT RETURN NOTE: R/G/B Gain: Increase or decrease the red/green/blue levels in the picture.
English 32 CONTROLS AND FEA TURES Adaptive Luma Control Automatically adjusts the brightness and contrast after analyzing the input signal. This function enriches the colours and the depth of the picture. In the PICTURE menu, press ▼ to highlight Advanced Video and press ► or to enter .
English 33 CONTROLS AND FEA TURES Press ▲ or ▼ to highlight Base Colour Adjustment and then press ► or . 7 Advanced Video Select Back Exit EXIT RETURN On Cinema Mode Auto Off On NR CTI Adaptive .
English 34 CONTROLS AND FEA TURES Timer control Time Zone When you select a Time Zone , the TV time is set by the time offset information based on T ime Zone and GMT (Greenwich Mean T ime) which is received with the broadcast signal and the time is set automatically by a digital signal.
English 35 CONTROLS AND FEA TURES Sleep Timer The television can be set to turn itself Off automatically after a preset time. Press ▼ to highlight Sleep Timer in the APPLICA TIONS menu. Press ◄ or ► to set the timer from Off, 10, 20, 30, 40, 50, 60, 90 or 120 Minutes.
English 36 CONTROLS AND FEA TURES Input signal selection This spec ies the type of si gnal going into SCAR T on the back of the television. Please refer to the manufacturers instructions for the connected equipment. In the SETUP menu, press ▼ to highlight SCART , then press ► or to enter .
English 37 CONTROLS AND FEA TURES Input Source Selection When any equipment using CEC technology is connected, the REGZA-LINK icon will appear in the input source list allowing selection of individual devices. Press . A list will appear on screen showing modes and all stored external equipment.
English 38 CONTROLS AND FEA TURES REGZA-LINK Menus By activating the Enable REGZA-LINK feature in the REGZA-LINK setup menu, individual REGZA-LINK features can then be activated.
English 39 CONTROLS AND FEA TURES Auto Standby When the Auto Standby is enabled, switching off the television will automatically switch of f all connected REGZA-LINK equipment. In the REGZA-LINK Setup menu, press ▼ to highlight Auto Standby . Press ◄ or ► to select On or Off .
English 40 CONTROLS AND FEA TURES Photo Multi-View This view mode allows all the images within a selected folder t o be viewe d simulta neously , usin g thumbnail views in a grid. The initial highlighted position will be the top left image within the grid.
English 41 CONTROLS AND FEA TURES Viewing Music Files This view mode allows all the music les within a selected folder t o be viewe d simulta neously , usin g thumbnail views in a grid. The initial highlighted position will be the top left image within the grid.
English 42 CONTROLS AND FEA TURES Prefer ence contr ol Analogue Subtitle Y ou can set the subtitle on or off while watching TV . Highlight Subtitle in the PREFERENCES menu, and press ► or to enter .
English 43 CONTROLS AND FEA TURES Audio Channel If stereo or dual language broadcasts are transmitted, the word Stereo or Dual will appear on the screen each time the programme positions are changed, and then disappear after a few seconds. If the broadcast is not in stereo, the word Mono will appear .
English 44 CONTROLS AND FEA TURES Parental contr ol This function bl ocks channels or p rogrammes that you do not want to or that you do not want your children to watch. A password is required to access this function. The factory default password is “0000”.
English 45 CONTROLS AND FEA TURES 4 Press ◄ or ► to set the Age Rating from age 4~18 or select None to turn this function off. Programme Block Age Rating None Select Back Exit EXIT RETURN NOTE: This function is available for the programme with Age Rating information.
English 46 CONTROLS AND FEA TURES Digital on-screen information and programme guide The on-screen information and programme guide give access to programme details for all available channels. Infor mation Press , the information screen will appear giving details of the programme and event currently being viewed.
English 47 CONTROLS AND FEA TURES Guide Select the on-screen guide by pressing GUIDE , the guide screen will appear highlighting details of the programme and event currently being viewed. This may take a few moments to appear . Press ◄ or ► for information on other events scheduled for the programme selected.
English 48 CONTROLS AND FEA TURES Manual O AD This feature enables upgrading your TV software by air manually . In the SETUP menu, press ▼ to highlight Software Upgrade and press ► or to enter . Press ▼ to highlight Manual OAD and press ► or to enter .
English 49 TEXT SERVICES T ext ser vices This television has a multi-page text memory , which takes a few moments to load. Setting the Language Y ou can set the teletext language. In the PREFERENCES menu, press ▼ to highlight T eletext , then press ► or to conrm.
English 50 PROBLEM SOL VING Q Why is ther e no sound or picture? A Check the television is not in standby mode. Check the mains plug and all mains connections. Q Why is ther e incorrect or no sound when in DTV mode? A Press to ensure the hard of hearing option has not been selected.
English 51 PROBLEM SOL VING Q Why does the TV turn off by itself? A After roughly 15 minutes without any input video signal at TV mode, the TV will turn of f to save power . Q Does this TV support the DPMS? A This set is equipped with a function for saving energy which supports the VESA Display Power Management Signaling (DPMS) standard.
English 52 INFORMA TION DVB-T Broadcast systems/channels Broadcast systems/channels UK UHF 21-68 P AL-I UHF UK21-UK69 France VHF 05-10 (VHF 01-05) P AL-B/G UHF E21-E69 UHF 21-69 VHF E2-E12, S1-S41 Ger.
English 53 INFORMA TION License Information used with T oshiba T elevisions The software pre-installed in the T OSHIBA Digital T elevisions consists of multiple, independent software components. Each software component is copyrighted by T OSHIBA or a third party .
English 54 INFORMA TION Exhibit A Portions of this software are copyright © <2007> The FreeT ype Project (www .freetype.org). All rights reserved Exhibit B ICU License - ICU 1.8.1 and later COPYRIGHT AND PERMISSION NOTICE Copyright © 1995-2006 International Business Machines Corporation and others All rights reserved.
English 55 INFORMA TION DVB is a registered trademark of the DVB Project HDMI, the HDMI Logo, and High-Denition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Printed on recycled paper .
English 56 INFORMA TION Notes F or your o wn recor ds Cleaning the screen and cabinet… T urn off the power , clean the screen and cabinet with a soft, dry cloth. We recommend that you do not use any proprietary polishes or solvents on the screen or cabinet as this may cause damage.
An important point after buying a device Toshiba 32LV733DG (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toshiba 32LV733DG yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toshiba 32LV733DG - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toshiba 32LV733DG you will learn all the available features of the product, as well as information on its operation. The information that you get Toshiba 32LV733DG will certainly help you make a decision on the purchase.
If you already are a holder of Toshiba 32LV733DG, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toshiba 32LV733DG.
However, one of the most important roles played by the user manual is to help in solving problems with Toshiba 32LV733DG. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toshiba 32LV733DG along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
