Instruction/ maintenance manual of the product TLPX10E Toshiba
Go to page of 100
1 Before use CONTENTS O WNER’S MANU AL 3LCD DATA PROJECTOR TLP-X10E TLP-X11E TLP-X20E TLP-X21E TLP-X10Y TLP-X11Y TLP-X20Y TLP-X21Y ( WITH DOCUMENT IMAGING CAMERA ) ( WITH DOCUMENT IMAGING CAMERA ) TLP-X10E TEM P LAM P O N BUSY FA N O N/STANDBY KEYSTO NE SET AUTO AUTO EXIT ENTER M ENU INPUT VO L/ADJ.
2 Before use CONTENTS SAFETY PRECAUTIONS The lightning flash with arro whead symbol, within an equilateral triangle, is intended to aler t the user to the presence of uninsulated “dangerous v oltage” within the product’ s enclosure that ma y be of sufficient magnitude to constitute a risk of electric shock to persons .
3 Before use CONTENTS IMPORT ANT PRECAUTIONS In the spaces provided belo w , record the Model and Ser ial No . located at the bottom of y our LCD projector .
4 Before use CONTENTS IMPORT ANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL W ARNINGS AND INSTRUCTIONS GIVEN IN THIS OWNER’S MANUAL AND THOSE MARKED ON THE UNIT . RET AIN THIS BOOKLET FOR FUTURE REFERENCE. This set has been designed and manuf actured to assure personal safety .
5 Before use CONTENTS 5. Heat The product should be situated aw ay from heat sources such as radiators, heat registers, sto v es, or other products (including amplifiers) that produce heat.
6 Before use CONTENTS 1 1. Object and Liquid Entry Ne v er push objects of any kind into this product through openings as they ma y touch dangerous v oltage points or shor t- out par ts that could result in a fire or electric shock. Ne ver spill liquid of an y kind on the product.
7 Before use CONTENTS 16. If glass components, including lens and lamp, should break, contact your dealer for repair service. This product incor porates glass components, including a lens and a lamp . If such par ts should break, please handle with care to a void injury and contact your dealer f or repair ser vice.
8 Before use CONTENTS IMPORT ANT SAFETY INSTRUCTIONS (continued) 20. Safety Check Upon completion of any service or repairs to this product, ask the ser vice technician to perf or m saf ety checks to deter mine that the product is in proper operating condition.
9 Before use CONTENTS Power supply cord selection If y our line voltage is 220 to 240V , use one of the f ollowing types of cable . In Singapore, use the UK type plug cab le.
10 Before use CONTENTS Contents Before use SAFETY PRECAUTIONS ...................................................... 2 IMPORT ANT PRECAUTIONS ............................................... 3 IMPORT ANT SAFETY INSTRUCTIONS ............................
11 Before use CONTENTS Names of each part on the main unit Continued 12 Control panel Air e xhaust Infrared remote sensor Front side Right side Rear side Left side Card slot Anti-theft lock hole Speaker Air intake Air intake F oot adjuster release button F oot adjuster Zooming le ver F ocusing r ing Also mounted on the front of the left side.
12 Before use CONTENTS Names of each part on the main unit (continued) T o displa y the menu screen and/or select the operation on the menu screen. Also use the selection button, ENTER b utton and EXIT button to oper ate the memor y card. Use the selection button and EXIT b utton to enlarge the image.
13 Before use CONTENTS USB MONITOR OUT COMPUTER IN 1 ( Y/P B /P R ) COMPUTER IN 2 CONTROL S-VIDEO VIDEO VIDEO IN R - A UDIO - L A UDIO IN A UDIO OUT 26 93 22 25 27 39 24 24 23 24 27 22 25 VIDEO jack T o enter video signal from a video equipment, etc. A UDIO(L/R) jacks T o enter audio signal from a video equipment, etc.
14 Before use CONTENTS Names of each part on the remote control INPUT button MUTE button RESIZE buttons R-CLICK button L-CLICK button P ointer control button V OLUME/ADJUST buttons A UT O KEYST ONE bu.
15 Before use CONTENTS Loading batteries Notes Using batteries incorrectly can cause them to leak or b urst. Strictly obser ve the f ollowing. • Install the batter ies with their + and – ends f acing correctly . • Do not charge, heat, disassemble , or shor t the batteries or throw them into a fire.
16 Before use CONTENTS Remote control operation P oint the remote control at the infrared remote sensor and press a b utton. Notes • The remote control may not operate when there is sunlight or other strong light such as a fluorescent lamp shining on the remote sensor .
17 Installation and connection CONTENTS Floor-mounted projector placement Floor-mounted front projection Viewing a picture projected on the front of the screen from a floor installation. Floor-mounted rear projection Viewing a picture projected through the bac k of the screen from a floor installation.
18 Installation and connection CONTENTS Place the projector on a steady , level surface such as a table. T o obtain proper screen projected, place the projector so that the projecting light hits the screen squarely .
19 Installation and connection CONTENTS Connect the power cord. • Inser t one end in the A C IN sock et on the projector . • Inser t the other end in a wall outlet.
20 Installation and connection CONTENTS Projector placement angle adjustment F oot adjuster release button F oot adjuster The tilt of the projector can be adjusted using the f oot adjuster . Lift the front of the projector until a tilt angle desired is obtained and hold down the foot adjuster release button.
21 Installation and connection CONTENTS Ceiling-mounted front projection Viewing a picture projected on the front of the screen from a ceiling installation. Ceiling-mounted rear projection Viewing a picture projected through the bac k of the screen from a ceiling installation.
22 Installation and connection CONTENTS Notes • The projector cannot be connected to a computer without an analog RGB connector . For details , refer to the computer manual. • When connecting to a Macintosh computer , use the supplied Mac adapter (Multiple Scan 21 compatible).
23 Installation and connection CONTENTS Connecting a computer with DVI output connector Notes • The COMPUTER IN 2 connector can be used to input either digital RGB or analog RGB signals, depending on the connection cab le used. The projector’ s D VI connector is of the D VI analog & digital type .
24 Installation and connection CONTENTS Connecting video equipment Note The S-VIDEO connector and VIDEO jack can be used independently , b ut the audio input jacks are used as both the S-VIDEO and VIDEO input. Y ou can project the picture from video equipment by using VIDEO IN connectors.
25 Installation and connection CONTENTS Connecting video equipment (continued) Note Some component video signal sources include the Y/C B /C R signals of a D VD pla yer and the Y/P B /P R signals of high definition de vices, etc. Y ou can project the picture from video equipment with component video output jack.
26 Installation and connection CONTENTS Projector operation control by a computer USB MONITOR OUT COMPUTER IN 1 ( Y/P B /P R ) COMPUTER IN 2 CONTROL S-VIDEO VIDEO VIDEO IN R - AUDIO - L AUDIO IN AUDIO.
27 Installation and connection CONTENTS How to use the output connector USB MONITOR OUT COMPUTER IN 1 ( Y/P B /P R ) COMPUTER IN 2 CONTROL S-VIDEO VIDEO VIDEO IN R - AUDIO - L AUDIO IN AUDIO OUT USB M.
28 Operations CONTENTS Preparation 1 Install and connect the projector properly . 2 T ak e off the lens cover . Press ON/ST ANDBY . The projector tur ns on and the ON, LAMP and F AN indicators light in green. (The LAMP indicator blinks while the lamp is w ar ming up .
29 Operations CONTENTS Projection on the screen (continued) Select the input source. Press the INPUT button repeatedly to select it. The icon of the input source selected appears. (Y ou can select “Camera” when using the model with a document imaging camera.
30 Operations CONTENTS Adjust the picture size by turning the zooming lever . T ur n to the r ight to enlarge the picture. T ur n to the left to reduce the picture. Notes • When changing the projecting angle, adjust the f oot adjuster . 20 • When the screen image is distor ted in keystone , press the AUTO KEYST ONE button.
31 Operations CONTENTS T urning the power off Press ON/ST ANDBY after using the projector . An instruction message appears. Press ON/ST ANDBY again. Cooling star ts. Once cooling is completed, the LAMP and F AN indicators tur n off and the standb y mode is set.
32 Operations CONTENTS Notes • Automatic adjustment ma y not be performed properly for signals other than the RGB signals with which the projector is compatible 91 . • The hor izontal position, v er tical position, sampling phase and sampling frequency can also be adjusted from the menu screen 54 .
33 Operations CONTENTS Correcting the keystone distortion A picture ma y be expanded on the upper side if projected upw ard from the projector lifted up b y the f oot adjuster .
34 Operations CONTENTS Cutting off the picture and sound temporarily The image and sound of this projector can be turned off if you wish to temporarily project the image of another projector or a OHP , etc., on the screen. Note The mute mode is cancelled if another operation is perf ormed dur ing the mute mode.
35 Operations CONTENTS Freezing the picture Y ou can freeze the image being projected. Use this function to stop images from a video recorder to mak e presentations. Notes • The freeze mode is cancelled if any other operation is perf or med during the freeze mode.
36 Operations CONTENTS Y ou can enlarge (resize) the picture siz e projected. Enlarging the picture size Press RESIZE ( ). The enlargement ratio increases each time the RESIZE ( ) button is pressed. The enlargement ratio can be increased continuously b y keeping the button pressed in.
37 Operations CONTENTS Press PIP . A sub-picture is displa yed. Press the PIP button again to turn off the sub-picture. Video or S-video images can be displa yed as small images on the computer’ s image. (Ref erred to as “sub-pictures” in this manual.
38 Operations CONTENTS CALL Notes • The information display ed is not refreshed ev en if it changes. T o refresh the information, turn off the inf ormation display , then turn it back on. • The information display turns off if any other operation is perf or med.
39 Operations CONTENTS Operating a computer by the remote control Notes • This function is av ailable with Windows98 and Mac OS9 computers equipped with a USB port as standard.
40 Operations CONTENTS This projector can read the image data of JPEG f or mat stored in a memor y card to project the images on the screen. F or example, y ou can perform the presentation without a computer by con ver ting the presentation data prepared on the computer into JPEG f or mat and then sa ving in the memor y card.
41 Operations CONTENTS Projecting images stored in a memory card (continued) When using the memory card function for the first time, set the “Input source setting” on the menu screen. With the f actor y default setting, it is impossib le to select the memor y card input by the INPUT button.
42 Operations CONTENTS Description of screen 3 4 Continued ENTER EXIT Enter Select ABCDEFGH.jpg Up Next Back Display when there has a previous page . Display the name of f older or file selected. Operation guide Display when there has a follo wing page.
43 Operations CONTENTS Use the selection buttons ( / / / ) to select the thumbnail you wish to display as a slide. (Thumbnail selection) • The selected thumbnail is surrounded b y an orange frame. • If the desired file (thumbnail) is in a diff erent folder , select that f older .
44 Operations CONTENTS EM P LAMP ON FAN ON/STANDBY EXIT ENTER MENU INPUT Press T o eject the memory card T o eject a memory card, first check that the BUSY indicator is off , then press the card slot’ s eject button. The memory card pops out par t wa y , then pull it out by hand.
45 CONTENTS Adjustments & Settings • The menu screens f or making various adjustments and settings include a QUICK MENU f or frequently used adjustments and settings and a FULL MENU f or all the adjustments and settings.
46 CONTENTS Adjustments & Settings Adjustments and settings on the menu screen (continued) 48 54 60 62 64 67 71 QUICK MENU Item Meaning Contrast Adjust the image contrast Brightness Adjust the ima.
47 CONTENTS Adjustments & Settings Operating the menu screen Analog RGB ( 1 ) 0 0 0 +6 MENU EXIT QUICK MENU Contrast Brightness Adjust the contrast of the image.
48 CONTENTS Adjustments & Settings Preparation 1 Project a picture on the screen as e xplained in the step “Projection on the screen”. 28 Press MENU.
49 CONTENTS Adjustments & Settings 2 2 LASER MENU ON/ST ANDBY INPUT L-CLICK R-CLICK ENTER KEYSTONE AUTO SET EXIT PIP FREEZE MUTE CALL RESIZE VOLUME/ADJUST TEMP LAMP ON BUSY F AN KEYSTONE SET AUTO AUTO EXIT ENTER MENU INPUT VOL/ADJ .
50 CONTENTS Adjustments & Settings 3-a 3-a MENU ON/STANDBY INPUT L-CLICK R-CLICK ENTER KEYSTONE AUTO SET EXIT PIP FREEZE MUTE CALL RESIZE VOLUME/ADJUST TEMP LAMP ON BUSY F AN KEYSTONE SET AUTO AUTO EXIT ENTER MENU INPUT VOL/ADJ . TEMP LAMP ON BUSY FAN ON/STANDBY KEYSTONE SET AUTO AUTO EXIT ENTER MENU INPUT VOL/ADJ.
51 CONTENTS Adjustments & Settings When selecting “Input source setting” in step 2. (Set the input source that can be selected by the INPUT button.) Use the selection buttons ( / ) to select the input source to be set, then press ENTER to check it.
52 CONTENTS Adjustments & Settings QUICK MENU adjustments and settings (continued) LASER 3-c 3-c 3-c 3-c 3-c 3-c MENU ON/STANDBY INPUT L-CLICK R-CLICK ENTER KEYSTONE AUTO SET EXIT PIP FREEZE MUTE CALL RESIZE VOLUME/ADJUST TEMP LAMP ON BUSY F AN KEYSTONE SET AUTO AUTO EXIT ENTER MENU INPUT VOL/ADJ .
53 CONTENTS Adjustments & Settings QUICK MENU adjustments and settings (continued) 3-d Press ENTER. The sub-menu screen of interval setting appears. Use the selection buttons ( / ) to select interval time. 10 sec. 30 sec. 3 min. 10 min. Depending on the compression f ormat of the JPEG files, it ma y take more time than the setting v alue.
54 CONTENTS Adjustments & Settings 2 Press MENU twice. When pressed once, the Q UICK MENU screen appears. When pressed twice, the “Picture” screen of the FULL MENU appears.
55 CONTENTS Adjustments & Settings FULL MENU adjustments and settings – Picture (continued) 3-a MENU ON/STANDBY INPUT L-CLICK R-CLICK ENTER KEYSTONE AUTO SET EXIT PIP FREEZE MUTE CALL RESIZE VOLUME/ADJUST TEMP LAMP ON BUSY F AN KEYSTONE SET AUTO AUTO EXIT ENTER MENU INPUT VOL/ADJ .
56 CONTENTS Adjustments & Settings MENU ON/STANDBY INPUT L-CLICK R-CLICK ENTER KEYSTONE AUTO SET EXIT PIP FREEZE MUTE CALL RESIZE VOLUME/ADJUST TEMP LAMP ON BUSY F AN KEYSTONE SET AUTO AUTO EXIT ENTER MENU INPUT VOL/ADJ .
57 CONTENTS Adjustments & Settings MENU ON/STANDBY INPUT L-CLICK R-CLICK ENTER KEYSTONE AUTO SET EXIT PIP FREEZE MUTE CALL RESIZE VOLUME/ADJUST TEMP LAMP ON BUSY F AN KEYSTONE SET AUTO AUTO EXIT ENTER MENU INPUT VOL/ADJ . 3-b 3-b 3-b 3-b 3-b 3-b 3-b 3-b TEMP LAMP ON BUSY FAN ON/STANDBY KEYSTONE SET AUTO AUTO EXIT ENTER MENU INPUT VOL/ADJ.
58 CONTENTS Adjustments & Settings MENU ON/STANDBY INPUT L-CLICK R-CLICK ENTER KEYSTONE AUTO SET EXIT PIP FREEZE MUTE CALL RESIZE VOLUME/ADJUST TEMP LAMP ON BUSY F AN KEYSTONE SET AUTO AUTO EXIT ENTER MENU INPUT VOL/ADJ .
59 CONTENTS Adjustments & Settings MENU ON/STANDBY INPUT L-CLICK R-CLICK ENTER KEYSTONE AUTO SET EXIT PIP FREEZE MUTE CALL RESIZE VOLUME/ADJUST TEMP LAMP ON BUSY F AN KEYSTONE SET AUTO AUTO EXIT ENTER MENU INPUT VOL/ADJ .
60 CONTENTS Adjustments & Settings 1 1 2,3 3 2 MENU ON/STANDBY INPUT L-CLICK R-CLICK ENTER KEYSTONE AUTO SET EXIT PIP FREEZE MUTE CALL RESIZE VOLUME/ADJUST TEMP LAMP ON BUSY F AN KEYSTONE SET AUTO AUTO EXIT ENTER MENU INPUT VOL/ADJ . TEMP LAMP ON BUSY FAN ON/STANDBY KEYSTONE SET AUTO AUTO EXIT ENTER MENU INPUT VOL/ADJ.
61 CONTENTS Adjustments & Settings MENU ON/STANDBY INPUT L-CLICK R-CLICK ENTER KEYSTONE AUTO SET EXIT PIP FREEZE MUTE CALL RESIZE VOLUME/ADJUST TEMP LAMP ON BUSY F AN KEYSTONE SET AUTO AUTO EXIT ENTER MENU INPUT VOL/ADJ . 5 5 4 4 TEMP LAMP ON BUSY FAN ON/STANDBY KEYSTONE SET AUTO AUTO EXIT ENTER MENU INPUT VOL/ADJ.
62 CONTENTS Adjustments & Settings 1 1 2,3 3 2 MENU ON/STANDBY INPUT L-CLICK R-CLICK ENTER KEYSTONE AUTO SET EXIT PIP FREEZE MUTE CALL RESIZE VOLUME/ADJUST TEMP LAMP ON BUSY F AN KEYSTONE SET AUTO AUTO EXIT ENTER MENU INPUT VOL/ADJ .
63 CONTENTS Adjustments & Settings LASER MENU ON/STANDBY INPUT L-CLICK R-CLICK ENTER KEYSTONE AUTO SET EXIT PIP FREEZE MUTE CALL RESIZE VOLUME/ADJUST TEMP LAMP ON BUSY F AN KEYSTONE SET AUTO AUTO EXIT ENTER MENU INPUT VOL/ADJ .
64 CONTENTS Adjustments & Settings 1 1 2,3 3 2 MENU ON/ST ANDBY INPUT L-CLICK R-CLICK ENTER KEYSTONE AUTO SET EXIT PIP FREEZE MUTE CALL RESIZE VOLUME/ADJUST TEMP LAMP ON BUSY F AN KEYSTONE SET AUTO AUTO EXIT ENTER MENU INPUT VOL/ADJ .
65 CONTENTS Adjustments & Settings LASER MENU ON/STANDBY INPUT L-CLICK R-CLICK ENTER KEYSTONE AUTO SET EXIT PIP FREEZE MUTE CALL RESIZE VOLUME/ADJUST TEMP LAMP ON BUSY F AN KEYSTONE SET AUTO AUTO EXIT ENTER MENU INPUT VOL/ADJ . 4-a 4-a TEMP LAMP ON BUSY FAN ON/STANDBY KEYSTONE SET AUTO AUTO EXIT ENTER MENU INPUT VOL/ADJ.
66 CONTENTS Adjustments & Settings MENU ON/STANDBY INPUT L-CLICK R-CLICK ENTER KEYSTONE AUTO SET EXIT PIP FREEZE MUTE CALL RESIZE VOLUME/ADJUST TEMP LAMP ON BUSY F AN KEYSTONE SET AUTO AUTO EXIT ENTER MENU INPUT VOL/ADJ .
67 CONTENTS Adjustments & Settings 1 1 2,3 3 2 MENU ON/STANDBY INPUT L-CLICK R-CLICK ENTER KEYSTONE AUTO SET EXIT PIP FREEZE MUTE CALL RESIZE VOLUME/ADJUST TEMP LAMP ON BUSY F AN KEYSTONE SET AUTO AUTO EXIT ENTER MENU INPUT VOL/ADJ . TEMP LAMP ON BUSY FAN ON/STANDBY KEYSTONE SET AUTO AUTO EXIT ENTER MENU INPUT VOL/ADJ.
68 CONTENTS Adjustments & Settings LASER 4-a 4-a 4-a 4-a 4-a 4-a 4-a 4-a MENU ON/STANDBY INPUT L-CLICK R-CLICK ENTER KEYSTONE AUTO SET EXIT PIP FREEZE MUTE CALL RESIZE VOLUME/ADJUST TEMP LAMP ON BUSY F AN KEYSTONE SET AUTO AUTO EXIT ENTER MENU INPUT VOL/ADJ .
69 CONTENTS Adjustments & Settings LASER 4-b 4-b 4-b 4-b 4-b 4-b MENU ON/STANDBY INPUT L-CLICK R-CLICK ENTER KEYSTONE AUTO SET EXIT PIP FREEZE MUTE CALL RESIZE VOLUME/ADJUST TEMP LAMP ON BUSY F AN KEYSTONE SET AUTO AUTO EXIT ENTER MENU INPUT VOL/ADJ .
70 CONTENTS Adjustments & Settings MENU ON/STANDBY INPUT L-CLICK R-CLICK ENTER KEYSTONE AUTO SET EXIT PIP FREEZE MUTE CALL RESIZE VOLUME/ADJUST TEMP LAMP ON BUSY F AN KEYSTONE SET AUTO AUTO EXIT ENTER MENU INPUT VOL/ADJ . 5 5 4-c 4-c TEMP LAMP ON BUSY FAN ON/STANDBY KEYSTONE SET AUTO AUTO EXIT ENTER MENU INPUT VOL/ADJ.
71 CONTENTS Adjustments & Settings 1 1 2,3 3 2 MENU ON/STANDBY INPUT L-CLICK R-CLICK ENTER KEYSTONE AUTO SET EXIT PIP FREEZE MUTE CALL RESIZE VOLUME/ADJUST TEMP LAMP ON BUSY F AN KEYSTONE SET AUTO AUTO EXIT ENTER MENU INPUT VOL/ADJ . TEMP LAMP ON BUSY FAN ON/STANDBY KEYSTONE SET AUTO AUTO EXIT ENTER MENU INPUT VOL/ADJ.
72 CONTENTS Adjustments & Settings MENU ON/STANDBY INPUT L-CLICK R-CLICK ENTER KEYSTONE AUTO SET EXIT PIP FREEZE MUTE CALL RESIZE VOLUME/ADJUST TEMP LAMP ON BUSY F AN KEYSTONE SET AUTO AUTO EXIT ENTER MENU INPUT VOL/ADJ . 5 4 5 4 TEMP LAMP ON BUSY FAN ON/STANDBY KEYSTONE SET AUTO AUTO EXIT ENTER MENU INPUT VOL/ADJ.
73 CONTENTS Adjustments & Settings LASER 1 3 1 3 2 2 MENU ON/STANDBY INPUT L-CLICK R-CLICK ENTER KEYSTONE AUTO SET EXIT PIP FREEZE MUTE CALL RESIZE VOLUME/ADJUST TEMP LAMP ON BUSY F AN KEYSTONE SET AUTO AUTO EXIT ENTER MENU INPUT VOL/ADJ .
74 CONTENTS Document imaging camera Part names (of the document imaging camera model) CAUTION When using the camera, be careful to not pinch your hand or fingers into the arm. On the document imaging camera model, y ou can project pictures using the document imaging camera.
75 CONTENTS Document imaging camera Notes • Nev er give shoc ks or impacts to the camera or arm as this may cause malfunction. • While raising up or tur ning the arm, the ar m mov es describing an arc, be careful not to hit y our f ace or your body .
76 CONTENTS Document imaging camera Picture projection with the document imaging camera T E M P L A M P O N B U S Y F A N O N /S T A N D B Y K E Y S T O N E S E T A U T O A U T O E X I T E N T E R M E N U IN P U T V O L /A D J . STO R E C A M ER A A R M L IG H T LO C K W .
77 CONTENTS Document imaging camera Press CAMERA to select the camera input mode. • Y ou can also select it by pressing INPUT on the remote control or on the main unit. Set the input source on the men u screen when selecting by the INPUT button. 54 • The CAMERA b utton can be used regardless of the input setting.
78 CONTENTS Document imaging camera Press CAMERA GAIN (+/-) to improve view of a camera subject which is too dark or vivid. 6 Notes • Y ou can adjust the “Shar pness” of the camera image on the men u screen.
79 CONTENTS Document imaging camera Normally , this camer a automatically adjusts the color balance to project the picture . If the adjustment is not sufficient, f ollow the steps belo w to lock the white balance. 1 Project a white paper and enlarge it to fill the screen.
80 CONTENTS Document imaging camera With the document camera operating, fully cover the camera lens with a piece of black paper or cloth. 1 Correcting illuminated defects Note Do not press ARM LIGHT and EXIT buttons sim ultaneously if the camera lens is not cov ered.
81 CONTENTS Document imaging camera Store the camera images into the memory card ST ORE IMA GE ENTER ENTER BUSY MENU ON/STANDBY INPUT L-CLICK R-CLICK ENTER KEYSTONE AUTO SET EXIT PIP FREEZE MUTE CALL RESIZE VOLUME/ADJUST 3 LASER TEMP LAMP ON BUSY FAN KEYSTONE SET AUTO AUTO EXIT ENTER MENU INPUT VOL/ADJ.
82 Maintenance CONTENTS If there is some prob lem inside the projector , the indicators light up or b link. T rouble indications Indicator TEMP LAMP ON BUSY F AN TEMP LAMP ON BUSY F AN TEMP LAMP ON BU.
83 Maintenance CONTENTS Air filter cleaning CAUTION If you use the projector mounted on the ceiling, ask the dealer to carr y out the maintenance such as cleaning. The filter inside the air filter cov er is the par t to shut out dusts or dregs. Do not use the projector with the filter tak en off .
84 Maintenance CONTENTS Air filter cleaning (continued) Assemble the air filter . Place the air filter in the air filter cov er , then inser t the f our tabs on the filter frame into the holes in the air filter cov er .
85 Maintenance CONTENTS Cleaning the lens Use a blo wer or a lens cleaner to clean the lens. Ne ver rub or tap the lens with a hard object as the lens surf ace is fragile . Lens and main unit cleaning Cleaning the main unit • Pull out the po wer cord bef ore cleaning.
86 Maintenance CONTENTS Lamp replacement The lamp will e ventually begin to project dark or dull pictures and finally will not light up . (Lamp’ s lif e length depends on the use condition.
87 Maintenance CONTENTS Notes • When the CALL button is pressed, the “Lamp time” (the approximate amount of time the lamp has been used) is displa yed. 38 • The lamp should be replaced if the total working time e xceeds about 1,000 hours. When the “Lamp time” is displa yed 1000 hours, the icon and a message appear .
88 Others CONTENTS Before calling service personal Symptom The power does not come on. The power turns off while using the projector . No image appears. No sound is heard. Desired input source cannot be selected by the INPUT button. RGB1 input or Y/P B /P R input colors are not right.
89 Others CONTENTS Symptom The color is faint. The tint is not good. The remote control does not work . Image data on a memory card cannot be displa yed. Mouse function cannot be used from the remote control unit. Document camera image is blurry . Document camera image flick ers.
90 Others CONTENTS Mini D-sub 15pin connector Pin No . 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Description T .M.D .S. data 2 - T .M.D .S. data 2 + T .M.D .S. data 2/4 shield T .M.D .S. data 4 - T .M.D .S. data 4 + DDC clock DDC data Analog v er tical sync signal T .
91 Others CONTENTS TEXT70 640 x 350 50 640 14 96 800 31.469 70.086 25.175 59 350 38 2 449 TEXT70 640 x 400 50 640 14 96 800 31.469 70.086 25.175 34 400 13 2 449 TEXT85 640 x 350 96 640 32 64 832 37.861 85.080 31.500 60 350 32 3 445 TEXT85 640 x 400 96 640 32 64 832 37.
92 Others CONTENTS Applicable signal (continued) Timing char t (Continued) *SXGA1152x864 75Hz 1152 x 864 256 1152 64 128 1600 67.500 75.000 108.000 32 864 1 3 900 *SXGA1280x960 60Hz 1280 x 960 312 1280 96 112 1800 60.000 60.000 108.000 36 960 1 3 1000 *SXGA1280x960 85Hz 1280 x 960 224 1280 64 160 1728 85.
93 Others CONTENTS Controlling the projector by using RS-232C Y ou can also control the projector by entering the command from a computer via RS-232C. CONTROL RS-232C Mini DIN 8-pin Command list RS-232C 9600 bps, No parity , Data length: 8 bit, Stop bit: 1 bit STX (02h) Command (3Byte) ETX (03h) One command only can be used in one communication.
94 Others CONTENTS Continued Controlling the projector by using RS-232C (continued) Classification Digital RGB Y/P B /P R Memor y Card Document Imaging Camera Analog RGB1 Analog RGB2 Video S-video Adjustment Command Selection Command Items/Status Picture P osition H-position V -position Picture mode Bright T rue color Video mode Auto .
95 Others CONTENTS Controlling the projector by using RS-232C (continued) Continued Classification Digital RGB Y/P B /P R Memor y Card Document Imaging Camera Analog RGB1 Analog RGB2 Video S-video Adj.
96 Others CONTENTS Continued Controlling the projector by using RS-232C (continued) Classification Digital RGB Y/P B /P R Memor y Card Document Imaging Camera Analog RGB1 Analog RGB2 Video S-video Adj.
97 Others CONTENTS Continued Controlling the projector by using RS-232C (continued) Classification Items/Status Digital RGB Y/P B /P R Memor y Card Document Imaging Camera Analog RGB1 Analog RGB2 Vide.
98 Others CONTENTS Controlling the projector by using RS-232C (continued) Classification Digital RGB Y/P B /P R Memor y Card Document Imaging Camera Analog RGB1 Analog RGB2 Video S-video Adjustment Co.
99 Others CONTENTS Specifications A UDIO OUT 1V(p-p), less than 2.2k Ω , ø3.5mm stereo mini jack CONTROL Mini DIN 8-pin (RS-232C) USB output T ype B Liquid crystal display Projection system 3-panels transmission P anel size 1.3 inches Driving system TFT activ e matrix Picture elements 786,432 pix els (1024 x 768 dots) (H.
100 Others CONTENTS Accessories Owner’ s manual (Getting star ted) ........................... 1 Owner’ s manual (CD-R OM) .................................... 1 Remote control ........................................................ 1 R6 (AA) size battery .
An important point after buying a device Toshiba TLPX10E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Toshiba TLPX10E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Toshiba TLPX10E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Toshiba TLPX10E you will learn all the available features of the product, as well as information on its operation. The information that you get Toshiba TLPX10E will certainly help you make a decision on the purchase.
If you already are a holder of Toshiba TLPX10E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Toshiba TLPX10E.
However, one of the most important roles played by the user manual is to help in solving problems with Toshiba TLPX10E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Toshiba TLPX10E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
