Instruction/ maintenance manual of the product TwinTec Twin Tec
Go to page of 8
Daytona Twin Tec LLC, 933 Beville Road, Suite 101- H, S. Daytona, FL 32119 TCFI Log (386) 304-0700 www.day tona-twintec.com 10/2007 Page 1 Twin Tec User Instructions for TCFI Log Software CAUTION: CAREFULLY READ INSTRUCTI ONS BEFORE PROCEEDING. NOT LEGAL FOR USE OR SALE ON POLLUTION CONTROLLED VEHICLES.
Daytona Twin Tec LLC, 933 Beville Road, Suite 101- H, S. Daytona, FL 32119 TCFI Log (386) 304-0700 www.day tona-twintec.com 10/2007 Page 2 Hewlett-Packard laser and inkjet printers and Epson inkjet printers. We recommend using a color in kjet printer.
Daytona Twin Tec LLC, 933 Beville Road, Suite 101- H, S. Daytona, FL 32119 TCFI Log (386) 304-0700 www.day tona-twintec.com 10/2007 Page 3 Figure 1 – Real Time Engine Data Display AFR – the air/fuel ratio bar graph has du al pointers. The yellow pointer on the left side is the air/fuel ratio command (from AFR table).
Daytona Twin Tec LLC, 933 Beville Road, Suite 101- H, S. Daytona, FL 32119 TCFI Log (386) 304-0700 www.day tona-twintec.com 10/2007 Page 4 DATA LOGGING CHART DISPLAY You can also display data logged by the TCFI unit on a chart recorder type screen.
Daytona Twin Tec LLC, 933 Beville Road, Suite 101- H, S. Daytona, FL 32119 TCFI Log (386) 304-0700 www.day tona-twintec.com 10/2007 Page 5 Figure 2 – Data Logging Chart Display The following additional functions are a vailable from the Edit menu: BLM Cell Display – shows the active cell in terms of RPM and TPS percent at the cursor position.
Daytona Twin Tec LLC, 933 Beville Road, Suite 101- H, S. Daytona, FL 32119 TCFI Log (386) 304-0700 www.day tona-twintec.com 10/2007 Page 6 USER OUTPUT MANUAL OVERRIDE The User Output Manual Overrid e com mand on the Communications menu allows you to manually override the user output on TCFI units.
Daytona Twin Tec LLC, 933 Beville Road, Suite 101- H, S. Daytona, FL 32119 TCFI Log (386) 304-0700 www.day tona-twintec.com 10/2007 Page 7 Figure 4 - Operating Stat istics Histogram Chart Historical diagnostic codes are only appl icabl e to TCFI Gen II units and TCFI units with Rev 6.
Daytona Twin Tec LLC, 933 Beville Road, Suite 101- H, S. Daytona, FL 32119 TCFI Log (386) 304-0700 www.day tona-twintec.com 10/2007 Page 8 TROUBLESHOOTING FLOWCHART Follow the troubleshooting flowchart bel ow. Experience has shown that most communication problems are use r erro r or PC compatibility issues.
An important point after buying a device Twin Tec TwinTec (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Twin Tec TwinTec yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Twin Tec TwinTec - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Twin Tec TwinTec you will learn all the available features of the product, as well as information on its operation. The information that you get Twin Tec TwinTec will certainly help you make a decision on the purchase.
If you already are a holder of Twin Tec TwinTec, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Twin Tec TwinTec.
However, one of the most important roles played by the user manual is to help in solving problems with Twin Tec TwinTec. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Twin Tec TwinTec along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
