Instruction/ maintenance manual of the product 60FX20B Ultratec
Go to page of 64
PROJECTION COLOR TV 60FX20B 50FX20B 50DX20B OPERA TING GUIDE IMPORT ANT SAFETY INSTRUCTIONS 2-3 FIRST TIME USE 4-16 THE REMOTE CONTROL UL TRA TEC BIT -MAP ON-SCREEN DISPLA Y USEFUL INFORMA TION INDEX 55-60 29-54 17-28 CUSTOMIZE SETUP VIDEO AUDIO THEA TER SEL As an E NERGY S TA R ® Partner , Hitachi, Ltd.
IMPORT ANT SAFETY INSTRUCTIONS 2 SAFETY POINTS YOU SHOULD KNOW ABOUT YOUR HIT ACHI TELEVISION Our reputation has been built on the quality , performance, and ease of service of HIT ACHI televisions. Safety is also foremost in our minds in the design of these units.
IMPORT ANT SAFETY INSTRUCTIONS 3 Read before operating equipment Follow all warnings and instructions marked on this television. 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water .
4 ACCESSORIES Check to make sure you have the following accessories before disposing of the packing material. 1. Remote Control Unit CLU-431 1UG (Part No. HL01651). 2. T wo “AA” size, 1.5V batteries (For Remote Control Unit). REMOTE CONTROL BA TTER Y INST ALLA TION AND REPLACEMENT 1.
5 HOW T O SET UP YOUR NEW HIT ACHI PROJECTION TV CAUTION: Magnetic fields, such as those of external speakers, may cause the picture to distort if they are placed too close to the television. Move the magnetic field source away from the television until there is no picture distortion.
6 HOOK-UP CABLES AND CONNECT ORS Most video/audio connections between components can be made with shielded video and audio cables that have phono connectors. For best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores that sell audio/video products.
7 DIGIT AL ARRA Y POWER EXIT SELECT Push open door and pull forward and down PUSH MENU INPUT VOL- VOL+ CH- CH+ POWER EXIT SELECT MENU INPUT VOL- VOL+ CH-.
8 FRONT P ANEL CONTROLS POWER light Y ou will see a red light when the TV is turned on. PERFECT PICTURE sensor The PERFECT PICTURE sensor will make automatic picture adjustments depending on the amount of light in the room to give the best picture.
9 REAR P ANEL JACKS SPEAKER MA TRIX SURROUND Switch Use this switch to choose between the surround and external speaker features. See page 16 for AUDIO SYSTEM SETUP.
REAR P ANEL CONNECTIONS 10 T ypical full feature setup. Follow connections that pertain to your personal entertainment system. STOP CONNECT ONLY 8 OHM SPEAKERS DO NOT SHORT CIRCUIT THESE TERMINALS. (Such damage is NOT COVERED by your television warranty) SP.
11 REAR SPEAKER TERMINAL CONNECTIONS CONNECT AFTER TURNING THE POWER OF THE TV OFF . Press the Right Speaker red button and insert the positive (+) lead wire into the hole next to the button. Once the wire is in place, pull the red button back to original position and the wire is locked into place.
12 EXTERNAL CONNECTIONS CONNECTING EXTERNAL AUDIO AMPLIFIER To control the audio level of an external audio amplifier with the remote control, connect the system as shown below .
13 CONNECTING EXTERNAL VIDEO SOURCES The exact arrangement you use to connect the VCR, camcorder , laserdisc player , and DVD player to your TV set is dependent on th e model and features of each component. Check the owner ’s manual of each component for the location of video and audio inputs an d outputs.
14 CONNECTING EXTERNAL VIDEO SOURCES NOTE: Completely insert the connection cord plugs when connecting to rear panel jacks. The picture that is played back will be abnormal if the connection is loose. If you have an S-VHS VCR, use the S-INPUT cable in place of the standard video cable.
15 CONNECTING EXTERNAL VIDEO SOURCES CONNECTING A STEREO LASERDISC PLA YER OR DVD PLA YER TO INPUT 4. 1. Connect the cable from the Y OUT of the Laserdisc or the DVD player to the INPUT 4 (Y) jack as shown on the TV set below .
16 AUDIO SYSTEM SETUP Match the numbers below to the diagram for speaker placement and refer to the table for the different surround sound requirements. The television’s internal speakers. These speakers are connected to a separate audio amplifier .
THE REMOTE CONTROL 17 In addition to controlling all the functions on your HIT ACHI Color TV , the new remote control is designed to operate different types of VCRs, DVD, CBL (Cable TV), and satellite converters with one touch. Basic operation keys are grouped together in one area.
18 HOW T O USE THE REMOTE TO CONTROL YOUR TV VOLUME, MUTE buttons Use these buttons to obtain the desired sound level. 123 456 789 0 INPUT STATUS VOL CH POWER TV CBL/SA T DVD/VCR PIP SW AP MOVE FREEZE.
19 HOW T O USE THE REMOTE TO CONTROL YOUR TV TV POWER button Press this button to turn the TV set on or of f. ST A TUS button Use the ST A TUS function to check the channel being received, or if it has stereo (ST) or second audio (SAP).
20 HOW T O USE THE REMOTE T O CONTROL YOUR TV INPUT button The INPUT button will select between the antenna signal and the video inputs. If the Sub-picture is on, and the main picture is chosen with the PIP CH button, the main picture will alternate between the video inputs and antenna source by every press of the INPUT button.
21 HOW T O USE THE REMOTE TO CONTROL YOUR TV VOLUME, MUTE buttons Press the VOLUME up ( ) or down ( ) button until you obtain the desired sound level. To reduce the sound to one half of normal volume (SOFT MUTE) to answer the telephone, etc.
22 PICTURE-IN-PICTURE (PIP) Y our HIT ACHI Projection TV incorporates Dual T uner technology designed for improved viewing enjoyment. This Dual T uner feature allows you to view the antenna input on both the main picture and sub-picture simultaneously , with separate tuning control for each.
23 PICTURE-IN-PICTURE (PIP) SW AP button If you wish to switch what is being shown on the main picture to the Sub-Picture, press the SW AP button. Gray background SW AP V ideo: 1 PIP Ant A 31 Green color Ant A 31 PIP Video: 1 Gray background Green color MOVE button To move the sub-picture to another corner , press the MOVE button.
24 PICTURE-IN-PICUTRE (PIP) FREEZE button If you wish to freeze the Sub-Picture, press the FREEZE button. This is convenient when trying to write down the address for a mail order company , recording statistics for a sporting event, etc. T o return the picture to motion, press the FREEZE button again.
25 USING THE REMOTE T O CONTROL VCR FUNCTIONS NOTES: 1. If your VCR cannot be operated after performing the above procedures, your VCR’s code has not been precoded into the remote. 2. In the unlikely event that your VCR cannot be operated after performing the above procedures, please consult your VCR operating guide.
26 USING THE REMOTE T O CONTROL DVD FUNCTIONS NOTES: 1. If your DVD Player cannot be operated after performing the above procedures, your DVD Player ’ s code has not been pre- coded into the remote.
27 USING THE REMOTE T O CONTROL CABLE BOX/SA TELLITE FUNCTIONS NOTES: 1. If your cable/satellite box cannot be operated after performing the above procedures, your cable/satellite box’s code has not been precoded into the remote.
28 CABLE, SA TELLITE, VCR, AND DVD CODES CABLE BRAND CODE General Instrument . . . . . . . . . . . . . . . . . . . . . . . . .17 Hamlin . . . . . . . . . . . . . . . . . . . . . . . . . . .22,23,24,25 Jerrold . . . . . . . . . . . . . . .00,01,02,03,04,05,06,07,21 Oak .
UL TRA TEC OSD 29 CUSTOMIZE SETUP VIDEO AUDIO THEA TER SEL 1. Press MENU on the remote control to display the dif ferent features on your HIT ACHI Projection TV . 2. Press the CURSOR buttons to highlight a dif ferent feature. 3. Press EXIT on the remote control to quickly exit from a menu.
UL TRA TEC OSD 30 CUSTOMIZE SETUP VIDEO AUDIO THEA TER SEL Menu Language Choose English, French, or Spanish text. Signal Source Select Antenna or Cable TV . Auto Channel Set First time set up for channel buttons. Channel Memory Channel buttons, add, skip.
SET UP 31 SETUP Select SETUP when setting your TV up for the first time. Use the CURSOR or on the remote to highlight the function desired. NOTE: To see an auto-demonstration of the on-screen displays with HELP text displayed, press and hold the POWER button on the TV set for approximately five seconds.
SET UP 32 SETUP Select ANTENNA if you are using an indoor or outdoor antenna. Select CA TV if you have cable TV . Press CURSOR or to highlight the signal source and press SELECT button to select the correct SIGNAL SOURCE mode. Press EXIT to quit MENU or CURSOR to return to previous menu.
SET UP 33 SETUP This feature will automatically store active TV channels in CHANNEL MEMORY . This will allow you to skip unused channels when using CHANNEL UP ( ) or DOWN ( ). If the EXIT button is pressed while the AUTO CHANNEL SET function is engaged, programming will stop.
SET UP 34 SETUP Use this function after AUT O CHANNEL SET to add or erase additional channels to the remote control CHANNEL or buttons. To add or erase additional channels while still in CHANNEL MEMOR Y use CHANNEL or , or the number buttons to change the channel.
SET UP 35 SETUP This function allows you to review which channels are labeled in CHANNEL ID (ID.), which have been added to CHANNEL MEMORY (SCAN), and which are protected by P ARENT AL CONTROL (LOCK). Press CURSOR or to review more channels. Press EXIT to quit menu or CURSOR to return to previous menu.
SET UP 36 SETUP The time must be set before you can use the 4 EVENT PROGRAM or TV TIME OUT . Use CURSOR or to set the time, date, and year . Press CURSOR or to change position. Press EXIT to quit menu or CURSOR to return to previous menu when the CURSOR is in the first position.
SET UP 37 SETUP Use the number buttons to select which point to adjust: - Upper Left, - Upper Middle, - Upper Right, - Center Left, - Center , - Center Right, - Bottom Left, - Bottom Middle, - Bottom Right. Press the CURSOR buttons to move the displayed color up, down, left, or right.
CUST OM 38 CUSTOMIZE CUSTOMIZE This selection contains advanced features which will make TV viewing easier and more enjoyable. Use this feature to give up to 20 channels a name when ANTENNA signal source is selected and up to 60 channels a name when CA TV1 signal source is selected.
CUST OM 39 CUSTOMIZE Use this feature to give a name to any of the four video inputs. Press CURSOR to select VIDEO LIST. Press CURSOR to select preset VIDEO LIST. Press CURSOR or to scroll through the preset VIDEO LIST. Press SELECT to select desired VIDEO ID.
CUST OM 40 CUSTOMIZE This function allows you to group your favorite channels into six personalized categories that you can rename. A total of 24 channels can be stored in the F AMIL Y F A VORITES function. To rename the categories, use the CURSOR buttons to highlight the category you would like to rename.
CUST OM 41 CUSTOMIZE Use this function to display F AMIL Y F A VORITES selection to tune the main picture to a desired favorite chan- nel. Select a category using CURSOR or buttons. Use CURSOR , , or buttons to highlight a favorite channel and the TV will automatically tune to that channel.
CUST OM 42 CUSTOMIZE This function will block out the picture and sound of the selected channel or video input. It can also be used to keep the TV from being viewed for a scheduled amount of time that you set. The code to enter P ARENT AL CONTROL is a four digit secret code number .
CUST OM 43 CUSTOMIZE Use MOVIE RA TINGS to eliminate from viewing, any movie that you feel may be inappropriate due to its content. Use CURSOR or to select the MOVIE RA TING category that you want to block. Press SELECT to block the MOVIE RA TING that you have selected.
CUST OM 44 CUSTOMIZE TV RA TINGS CUSTOMIZE SETUP VIDEO AUDIO THEA TER SEL Menu To Menu Bar To Quit Exit Menu To Menu Bar To Quit Exit Cursor Cursor Parental Control **** Enter Secret Code Channel 3 Vi.
CUST OM 45 CUSTOMIZE CANADIAN RA TINGS (ENG) CUSTOMIZE SETUP VIDEO AUDIO THEA TER SEL Menu To Menu Bar To Quit Exit Menu To Menu Bar To Quit Exit Cursor Cursor Parental Control **** Change Secret Code.
CUST OM 46 CUSTOMIZE CANADIAN RA TINGS (FRN) CUSTOMIZE SETUP VIDEO AUDIO THEA TER SEL Menu To Menu Bar To Quit Exit Menu To Menu Bar To Quit Exit G 8 ans + 13 ans + 16 ans + 18 ans + Canadian Ratings .
CUST OM 47 CUSTOMIZE This function will automatically turn the TV on and of f, one time only , every day or once a week. Press CURSOR then press SELECT to select PROGRAM 1, 2, 3, or 4. Press CURSOR or to select the time the TV will turn on and off.
CUST OM 48 CUSTOMIZE Use this function to automatically turn the TV on and tune to VIDEO: 4 when it detects a VIDEO input. Use CURSOR or , then press SELECT , to change AUTO LINK setting. When AUT O is selected, the TV will turn on and tune to VIDEO: 4 automatically , when the VIDEO: 4 input device is turned on.
CUST OM 49 CUSTOMIZE DISPLA Y : ON/OFF will turn the display on or off. AUTO will display closed captions when audio is muted. MODE: C.C. (Closed Caption) is for the program you are viewing. TEXT is for additional information such as news reports or a TV program guide.
VIDEO 50 VIDEO VIDEO Select VIDEO to adjust picture settings and improve picture quality . Use this function to change the contrast between black and white levels in the picture. This adjustment will only affect the picture when ADV ANCED SETTINGS PERFECT PICTURE is OFF .
VIDEO 51 VIDEO Y our HIT ACHI Projection TV has a PERFECT PICTURE function which will automatically adjust picture settings to produce the highest quality picture possible. When PERFECT PICTURE is highlighted, press SELECT to turn the PERFECT PICTURE on or off.
AUDIO AUDIO 52 Select AUDIO SETTINGS to adjust the TV to your preference and to improve the sound quality . This function controls the low frequency audio to all speakers. Use CURSOR or to highlight the function to be adjusted. Press CURSOR or to adjust the function.
AUDIO 53 AUDIO Use ADV ANCED SETTINGS to improve the sound performance of your TV , depending on listening conditions. MTS MODE Multi-Channel T elevision Sound will allow you to select STEREO (a stere.
THEA TER 54 THEA TER THEA TER Use CURSOR or to highlight THEA TER MODES function. Press SELECT to change THEA TER MODES function. When TV mode is chosen, the following are automatically set: CONTRAST-74%, AUTO COLOR-ON, COLOR TEMP.-W ARM, LOUDNESS-ON, PERFECT VOLUME-ON.
55 CARE OF YOUR HIT ACHI PROJECTION TV AND YOUR REMOTE CONTROL DO Dust the screen and cabinet with a soft cloth. Clean the screen with a dry cloth. Place your television away from extreme heat, humidity , and extremely dusty places.
56 RECEPTION PROBLEMS • IGNITION NOISE: Black spots or horizontal streaks may appear , picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electrical drills, and other electrical appliances. • GHOSTS: Ghosts are caused by the television signal following two paths.
USEFUL INFO 57 HIT ACHI Projection T elevision incorporates advanced power surge protection technology designed to protect against component or circuit damage due to external or internal voltage power surges. IF YOUR TELEVISION SHOULD APPEAR TO HA VE A LOSS OF POWER, PLEASE FOLLOW THIS PROCEDURE: 1.
58 SPECIFICA TION Features: • Superfine Picture Quality 850 Line Horizontal Resolution • Pure Green and Red Filter Lenses • PERFECT PICTURE System • Remote (Controls many DVD/VCR brands, cable boxes, and satellite boxes.
USEFUL INFO 59 Hitachi America, L TD. Home Electronics Division 1855 Dornoch Court San Diego, CA 92154 Hitachi America, L TD. Home Electronics Division Hitachi has made every effort to assure you hours of trouble free operation from your unit.
USEFUL INFO 60 In Canada: 1-800-HIT ACHI (1-800-448-2244) Monday - Friday EST 9:00am - 7:00pm Saturday EST 9:00am - 5:00pm Hitachi Canada, L TD. Digital Media Division Should you have any questions regarding warranty, service, operation, or technical assistance, please contact: Look for your French Manual on the outside of the box.
NOTES 61.
NOTES 62.
NOTES 63.
QR47635.
An important point after buying a device Ultratec 60FX20B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ultratec 60FX20B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ultratec 60FX20B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ultratec 60FX20B you will learn all the available features of the product, as well as information on its operation. The information that you get Ultratec 60FX20B will certainly help you make a decision on the purchase.
If you already are a holder of Ultratec 60FX20B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ultratec 60FX20B.
However, one of the most important roles played by the user manual is to help in solving problems with Ultratec 60FX20B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ultratec 60FX20B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
