Instruction/ maintenance manual of the product uh064sx-2 Uniden
Go to page of 16
uh064sx-2 Operating Guide T o bring outstanding wireless communication products to people's lives throughout the world. mic txp pt x mic.
15 14 13 21 22 17 16 18 19 24 28 20 23 25 26 27 T ORS 1 Antenna 16 DCS ON Indicator 2 PTT(Push-T o-T alk) Key 17 Scan Indicator 3 Monitor Key 18 Memory Indicator 4 Keylock/Call Key 19 Priority Channel.
GETTING ST ARTED Uniden does not represent this product to be waterproof . Do not expose this product to Rain or Moisture. BA TTERY INST ALLA TION Y our uh064sx unit uses the included NiMH batter y pack for power . The unit can be powered with optional 4 AAA ALKALINE batteries.
INST ALLING THE CHARGE CRADLE 1. Plug the AC adaptor into the rear of the charge cradle and into the mains power . 2. Place the uh064sx into the charge cradle. The char ge light will come on to indicate the unit is charging. 3. Before operating the uh064sx, charge the batter y pack for 16 hours.
BEL T CLIP T o attach the belt clip: Slide the belt clip until it snaps into place. T o remove the belt clip: T o remove the belt clip, press and hold belt clip locker , slide the belt clip at the same time until released. LOW BA TTERY ALERT If the batter y level becomes low , the batter y indicator icon on the display begins flashing.
OPERA TION POWER ON/OFF 1. Press and hold select/ key to turn the radio on. A channel number will appear on the display . 2. P ress and hold select/ key to turn the radio off . VOL UME 1. Press or key to increase or decrease the volume level. ‘VOL ’ icon appears on the display while volume is being adjusted.
(6) SELECTING A CHANNEL 1. Press ch/txp key momentarily to activate channel select mode. The displayed channel will flash. 2. Press or key to select the desired channel. For your reference a list of the available channels, corresponding frequencies and guidelines for their use is printed on page 12.
AUTOMA TIC SQUELCH FEA TURE The uh064sx is equipped with an Automatic Squelch System which shuts off weak transmissions and unwanted noise. MONITOR This feature enables users to listen for weak signals on the current channel at the press of a key. T o use monitor: 1.
(8) REPL Y DELAY While scanning, the uh064sx stops at a busy channel and receives a transmission. When the received signal is over , the unit will wait for 2 seconds for the return of the signal, other wise, the radio resumes scanning. TO OPERA TE IN DUPLEX MODE (REPEA TERS) The Duplex function enables you to access local repeater stations.
CTC SS & DC S (Continuous T one Coded Squelch System) & (Digital Coded Squelch) CTC SS is a feature that allows a group to talk to each other without hearing other users on the same channel. 1. P ress select/ key momentarily to enter CTCSS mode.
(10) VOX VOX is the automatic transmitting function by inputting voice into the VOX headset mic without pressing the PTT key. 1. P ress select/ key momentarily twice while in standby mode to enter VOX Sensitivity mode. The current selected VOX setting will flash on the display .
(11) PRIORITY SCAN CHANNEL T o set a priority scan channel: 1. Press select/ momentarily four times while in standby mode to enter Priority Scan Channel mode. The current priority channel will be indicated. 2. Press or key to increase or decrease the desired channel number .
UHF CB CHANNELS & FREQUENCIES Simplex Mode Duplex Mode Simplex Mode CH No. T ransmit / Receive T ransmit CH No. T ransmit/Receive F requency (MHz) F requency (MHz) Frequency (Mhz) 1 476.425 477.175 CH31 21 476.925 2 476.450 477.200 CH32 22 476.950 (RX only) 3 476.
(13) CTC S S & DC S Code List (o0) (o1) (o3) (o4) (o2).
W ARRANTY UNIDEN UH064SX-2 UHF CB TRANSCEIVER RADIO Limited One Y ear W arranty Please keep your sales docket as it provides evidence of warranty. W arrantor: Uniden Australia Pty Limited ABN58 001 865 498 Uniden New Zealand Limited. W arranty only available in original country of purchase.
© 2007 Uniden Australia Pty Limited/Uniden New Zealand Limited Printed in China UTZZ01933ZA(0).
An important point after buying a device Uniden uh064sx-2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Uniden uh064sx-2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Uniden uh064sx-2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Uniden uh064sx-2 you will learn all the available features of the product, as well as information on its operation. The information that you get Uniden uh064sx-2 will certainly help you make a decision on the purchase.
If you already are a holder of Uniden uh064sx-2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Uniden uh064sx-2.
However, one of the most important roles played by the user manual is to help in solving problems with Uniden uh064sx-2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Uniden uh064sx-2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
