Instruction/ maintenance manual of the product Power On Board VEC012POB Vector
Go to page of 6
8 Jump-Star t System 12 V olt DC Power Supply VEC012POB USER’S MANUAL & W ARRANTY INFORMA TION IMPORT ANT SAFETY INFORMA TION, SA VE THESE INSTRUCTIONS TO REDUCE THE RISK OF INJURY , USER MUST READ AND UNDERST AND THIS INSTRUCTIONAL MANUAL. THIS MANUAL CONT AINS IMPORT ANT INFORMA TION REGARDING THE OPERA TION AND W ARRANTY OF THIS PRODUCT .
Inflator Safety 1. Never attempt to disable or block the inflation and deflation ports while pump is operating. 2. Never cover unit at any time. 3. Never leave the pump unattended while in use. 4. Never allow sand, small rocks or other debris to be sucked into the inflation or deflation ports.
1 T ABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 1. T urn OFF vehicle ignition and all accessories (radio, A/C, lights, connected cell phone chargers, etc.). Place vehicle in “park” and set the emergency brake. 2. Make sure the Jump-Star ter Power Switch is turned to OFF . 3. Remove jumper clamps from clamp tabs.
5 (approximately 15 minutes, depending on ambient temperatures), as it may overheat. In such event, inflator will automatically shut down and restart after a cooling down period of approximately 15 minutes. Inflating Tires or Products With V alve Stems 1.
7 Fuse Replacement (DC Charging Adapter) 1. Remove the plug from the accessor y outlet. Remove the gold cap by turning counterclockwise and lifting off. 2. Remove the center pin and spring. Remove the fuse. 3. Replace the fuse with a same type and size fuse (8 amp).
An important point after buying a device Vector Power On Board VEC012POB (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vector Power On Board VEC012POB yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vector Power On Board VEC012POB - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vector Power On Board VEC012POB you will learn all the available features of the product, as well as information on its operation. The information that you get Vector Power On Board VEC012POB will certainly help you make a decision on the purchase.
If you already are a holder of Vector Power On Board VEC012POB, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vector Power On Board VEC012POB.
However, one of the most important roles played by the user manual is to help in solving problems with Vector Power On Board VEC012POB. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vector Power On Board VEC012POB along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
