Instruction/ maintenance manual of the product N2752w ViewSonic
Go to page of 35
V iewSonic ® Vi e w S o ni c ® N2752w LCD TV - User Guide - Guide de l’utilisateur - Guía del usuario Model No. : VS1 1257-1M.
ViewSonic N2752w ENGLISH Contents Compliance Information ................................................................................. 1 Important Safety Instructions .......................................................................... 2 Copyright Information .
ViewSonic N2752w 1 ENGLISH Compliance Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
ViewSonic N2752w 2 ENGLISH Important Safety Instructions 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this equipment near water.
ViewSonic N2752w 3 ENGLISH Copyright Information Copyright © ViewSonic ® Corporation, 2006. All rights reserved. ViewSonic, the three birds logo, OnView, ViewMatch, and ViewMeter are registered trademarks of ViewSonic Corporation.
ViewSonic N2752w 4 ENGLISH Antenna Installation Instructions 1. Outdoor Antenna Gr ounding If an outside antenna or cable system is connected to the product be sure the antenna or cable system is grou.
ViewSonic N2752w 5 ENGLISH Getting Started • LCD TV • Power Cord • VGA Cable • Quick Start Guide Congratulations on your purchase of a V iewSonic ® LCD TV . Important! Save the original box and all packing material for futur e shipping needs.
ViewSonic N2752w 6 ENGLISH Front V iew of the Product 1 2 3 4 5 6 8 7 V olume Down Decrease sound volume or adjust a highlighted control while in OSD menu. V olume Up Increase sound volume or adjust a highlighted control while in OSD menu. Menu T urn OSD menu ON/OFF .
ViewSonic N2752w 7 ENGLISH Rear V iew of the Pr oduct Analog TV input Connect to NTSC TV source. Digital TV input Connect to A TSC TV source. S-Video input Connect this port to the S-Video output of A/V device. A V/ S-Video signal Audio input (left/right) Connect this port to the RCA audio output connectors of your A/V device.
ViewSonic N2752w 8 ENGLISH Remote Control.
ViewSonic N2752w 9 ENGLISH 1 POWER Power ON/OFF 2 MTS Select Mono, Stereo or SAP in TV / Select audio language in DTV 3 INFO Display current information 4 SLEEP Set TV Sleep timer 5 SOUND Select sound modes 6 0~9, 100/- number button Directly channel select 7 VOL+ and VOL- Adjust volume UP/DOWN 8 GUIDE Show electronic program guide (EPG) 9 F A V .
ViewSonic N2752w 10 ENGLISH 2. Connecting RF antenna, Cable TV Wire or DTV cable Make sure the power is OFF before installing your LCD TV . 1) TV : Connect the LCD TV to TV antenna or set-top-box with 75-ohm coaxial cable.
ViewSonic N2752w 1 1 ENGLISH 3. Connecting to DVD / Set T op Box Co nn ect Vi de o/ Au di o cabl es f rom comp atib le d evic es i nto the back pan el o f LC D TV .
ViewSonic N2752w 12 ENGLISH 3) With YPbPr cable: YPbPr Cable (not supplied) Audio in Cable (not supplied) VCR or DVD Player 4) With HDMI cable: HDMI Cable (not supplied) VCR or DVD Player (DVD Player should have the HDMI output terminal) 4.
ViewSonic N2752w 13 ENGLISH 5. Connecting to the Headphone Connect the headphone to the headphone output terminal of the LCD TV . (He a dp hon e sol d s e pa rat el y). Headphone (not supplied) 6. Connecting to a Computer Connect the VGA cable from VGA output of computer to the VGA terminal input of your LCD TV .
ViewSonic N2752w 14 ENGLISH 8. Connecting to A/V Device with SPDIF input Connect SPDIF optical cable from A/V device into the SPDIF output connector of LCD TV .
ViewSonic N2752w 15 ENGLISH Basic Operation T o operate your LCD TV , you may use the TV remote control or top panel buttons to select input source, change channels, or adjust volume. T urning on the LCD TV Before using the LCD TV : 1. Connect external equipment properly .
ViewSonic N2752w 16 ENGLISH DTV Guide T o see the electronic program guide of the channel, press the GUIDE button on your re mot e co ntr ol . It w ill d is pla y th e ba ckg ro un d i nf or ma ti on re la ted t o th e cha nn el pr og ra m.
ViewSonic N2752w 17 ENGLISH Zoom Pres s ZO OM b utto n re peat edly to sele ct the scre en s ize. Y ou can sele ct from 1/8 , 1/ 4, 1/2, 1, x2, x4, and x8.
ViewSonic N2752w 18 ENGLISH V ideo Menu — Adjusting the picture quality Video Menu is active in all but the VGA input source. • Contrast: T o adjust contrast of video. (right: Max, left: Min). • Brightness: T o adjust luminance of video. (right: Max, left: Min).
ViewSonic N2752w 19 ENGLISH TV Menu — T o set up for TV It is only active in TV source. • T uner Mode: T o select Cable or Air as the TV source. • Auto Scan: T o a uto s c an th e T V c ha n ne ls . P re s s ENT ER to st ar t a ut o s c an ni ng TV c ha n ne ls .
ViewSonic N2752w 20 ENGLISH When you enter this control, the screen below will be displayed. The factory default of the password is “0000”. T o enable parental control, input the password, press ▼ button to focus on “ok” key , and press ENTER .
ViewSonic N2752w 21 ENGLISH DTV Menu — T o set up DTV settings It is only active in DTV sources. • Audio Language: T o select an audio language from English, French, or Spanish. • Time Zone: T o select T ime Zones. • SPDIF T ype: T o select the type of audio transfer file format.
ViewSonic N2752w 22 ENGLISH When in Add-on Mode , Press ENTER to start scanning all channels, and press MENU at anytime to cancel scanning. When in Range Mode , use ▲▼ and number buttons to set the scanning range. Press ENTER to start scanning, and press MENU at anytime to cancel scanning.
ViewSonic N2752w 23 ENGLISH • Channel Block: Press ENTER to enter the password and block/unblock the channel(s). • Caption: T o select closed caption signal formats and set up caption modes. (CC1~CC4, Service1~Service 6) Use ▲▼ to select Analog Closed Caption or Digital Closed Caption , and then use ◄► to select caption types.
ViewSonic N2752w 24 ENGLISH VGA Menu — T o set up for computer It is only active in VGA sources. • Auto Adjust: Press ENTER to auto adjust picture’s horizontal position, vertical position, fine tune and H-Size. • Contrast: T o adjust contrast of the video.
ViewSonic N2752w 25 ENGLISH • Block MP AA Rating: T o adjust movie blocking level in the US. Y ou can select between NONE , G , PG , PG-13 , R , NC-17 , or X . The movie Ratings in the US are defined as following. Use ENTER button to block or unblock the ratings, and use MENU to exit.
ViewSonic N2752w 26 ENGLISH • Canadian English Rating: T o adjust blocking level in English-speaking region of Canada. Y ou can select between CE_E , CE_C , CE_C8 , CE_G , CE_PG , CE_14 , and CE_18 . The TV Ratings in English-speaking region of Canada are defined as following.
ViewSonic N2752w 27 ENGLISH PIP/POP PIP/POP button allows you to watch two screens from dif ferent sources at the same time. (PIP is picture in picture; POP is picture out of picture) Press PIP/POP on the remote control repeatedly . The screen will change from normal screen → PIP screen → POP screen.
ViewSonic N2752w 28 ENGLISH • PIP Size Select: P r es s P .S I ZE to s ele ct th e siz e o f su b-s cr e en . Th e fun ct io n o nl y a ct s o n P IP . • PIP Position Select: Press P .POS to select the position of sub-screen. The function only acts on PIP .
ViewSonic N2752w 29 ENGLISH Oth er Inf ormation Specifications LCD T ype Color Filter Glass surface 27” TFT Active Matrix RGB 0.4365 (H) x 0.4365 (V) mm pixel RGB vertical stripe Anti-Glare Input signal RGB RF Video Audio RGB analog (0.
ViewSonic N2752w 30 ENGLISH T roubleshooting No power • Make sure the LCD TV is properly connected. • Make sure the AC power cord is properly connected.
ViewSonic N2752w 31 ENGLISH Customer Support For technical support or product service, see the table below or contact your reseller . Note: Y ou will need the product serial number . Country/ Region Web Site T=Telephone F=Fax Email Uni ted St ates www .
ViewSonic N2752w 32 ENGLISH Limited W arranty VIEWSONIC ® LCD TV What the warranty covers: V iewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period.
Vi e w S o ni c ®.
An important point after buying a device ViewSonic N2752w (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ViewSonic N2752w yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ViewSonic N2752w - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ViewSonic N2752w you will learn all the available features of the product, as well as information on its operation. The information that you get ViewSonic N2752w will certainly help you make a decision on the purchase.
If you already are a holder of ViewSonic N2752w, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ViewSonic N2752w.
However, one of the most important roles played by the user manual is to help in solving problems with ViewSonic N2752w. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ViewSonic N2752w along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
