Instruction/ maintenance manual of the product T9500HRT Ortho Vision Fitness
Go to page of 8
Assembly Guide T9200, T9300HR T , T9500HR T , T9500HR T Ortho AND T9600HR T Comfort AND T9700 Series PLA TFORM TREADMILLS.
1 STEP 2 STEP 5 STEP T o avoid possible damage to this Platform T readmill, please follow these assembly steps in the correct order . Before proceeding though, find your new Platform T readmill’ s s.
Screwdriver TOOLS, HARDW ARE, & P AR TS INCLUDED P AR TS BOX W ater Bottle, Qty: 1 Heart Rate Chest Strap, Qty: 1 ( Except T9200 ) Color-coded Hardware Bags Owner’ s Guide Assembly Guide W arran.
HARDW ARE INCLUDED ORANGE BAG BLUE BAG M8 x 135L Bolts Quantity: 4 M8 x 15L Bolts Quantity: 4 M8 x 55L Flathead Bolts Quantity: 4 YELLOW BAG M4 x 12L Panhead Screws Quantity: 4 M8 x 20L Bolts Quantity.
5 1 STEP 1 STEP • Slide the rubber covers on to the left & right console supports, making sure that the lower cutout is facing inward. T9700-Series: Slide the data cable down the right console support using the white wire tie as a guide.
6 3 STEP 2 STEP 2 STEP • Mount the console to the console mast using four bolts (M8 x 15L) and tighten with the 5mm Allen wrench. NOTE: Push all extra data cable into the console mast. Make sure not to pinch or cut the data cable. • Mount the right-hand side mount handlebar to the console mast using two bolts (M8 x 135L).
7 4 STEP Once the treadmill is plugged in, you need to perfor m an Auto-Calibration to assure maximum performance. MODELS T9300HRT , T9500HR T , T9500HRT Ortho, & T9600HRT Comfort: DO NOT ST AND ON THE BELT WHEN PERFORMING THE AUTO-CALIBRA TION • Y ou need to access User Engineering Mode to run the Auto-Calibration.
8 500 South CP Avenue • P .O. Box 280 • Lake Mills, WI 53551 toll free 1.800.335.4348 • phone 1.920.648.4090 • fax 1.920.648.3373 www .visionfitness.
An important point after buying a device Vision Fitness T9500HRT Ortho (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vision Fitness T9500HRT Ortho yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vision Fitness T9500HRT Ortho - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vision Fitness T9500HRT Ortho you will learn all the available features of the product, as well as information on its operation. The information that you get Vision Fitness T9500HRT Ortho will certainly help you make a decision on the purchase.
If you already are a holder of Vision Fitness T9500HRT Ortho, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vision Fitness T9500HRT Ortho.
However, one of the most important roles played by the user manual is to help in solving problems with Vision Fitness T9500HRT Ortho. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vision Fitness T9500HRT Ortho along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
