Instruction/ maintenance manual of the product WAV 10125050 Windsor
Go to page of 28
86038510-Y 01/10/09 PRV NO. 98780 Operating Instructions (ENG) MODEL: WAV 10125050 Power Source: 115V Electric Beginning with Serial No. 1000039213 Read instructions before operating the machine.
MACHINE DATA LOG/OVERVIEW WAV 86038510 05/15/07 1 For the name and address of your dealer contact: Windsor Industries YOUR DEALER Name: ____________________ ___________________________________ _______.
TABLE OF CONTENTS WAV 86038510 05/15/07 2 Machine Data Log/Overview. ........................ 1 Table of Contents .......................................... 2 HOW TO USE THIS MANUAL How to use this Manual. ................................ 1-1 SAFETY Important Safety Instructions .
HOW TO USE THIS MANUAL WAV 86038510 05/15/07 1-1 This manual contains the f ollowin g sections: - HOW TO USE THIS MANUAL - SAFETY - OPERATIONS - MAINTENANCE - PARTS LIST The HOW TO USE THIS MANUAL section will tell you how to find important information for ordering correct repair parts.
WAV 86038510 05/15/07 2-1 IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precaution must always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE. To reduce the risk of fire, electric shock, or injury: Use only indoors.
HAZARD INTENSITY LEVEL WAV 86038510 05/15/07 2-2 The following symbols are used throughout this guide as indicated in their descriptions: HAZARD INTENSITY LEVEL There are three levels of hazard in tensity identified by signal words - WARNI NG and CAUTION and FOR SAFETY.
GROUNDING INSTRUCTIONS WAV 86038510 05/15/07 2-3 THIS PRODUCT IS FOR C OMMERCIAL USE ONLY. ELECTRICAL: In the USA this machine operates on a standard 15 amp 115V, 60 hz, A.C. power circuit . The amp, hertz, and voltage are listed on the data label found on each machine.
CONTROLS WAV 86038510 05/15/07 3-1 1 Main Handle. Adjusts for operator comfort and storage. 2 Brush on/off lever. Activates brush wh en depressed. 3 Accessory vacuum hose and wand. Allows operator to clean edges, rece ssed, ledges, upholstery, etc. 4 Detail tools Dusting brush, crevice and upholstery tools for above the floor clea ning.
OPERATIONS WAV 86038510 05/15/07 3-2 FILTE R /B A G C OM P A R TM E N T WAVE SET UP 1. Take machine out of storage position by lowering onto all four wheels. 2. Adjust handle to comfortable position at waist level by opening adjustment lever on left side of machine and moving handle.
OPERATION WAV 86038510 05/15/07 3-3 BR US H P O SI T I O N HOW IT OPERATES This machine is a portabl e, easy to use wide area vacuum designed for u se i ndoors, in a commercial or light industrial environment.
MAINTENANCE WAV 86038510 05/15/07 4-1 NOTE: T HE FOLLOWING SERVICE IT EMS SHOULD BE PERFORMED BY AN AUTHORIZED SERVICE FACIL ITY OR AUTHORIZED SERVICE PERSONNEL . A LL PARTS REFER RED TO IN THESE INSTRUCTION S CAN BE IDENTIFIED BY USING THE PA RTS LISTS AND ILLUSTRATION S ON THE FOLLOWING PAGES .
MAINTENANCE WAV 86038510 05/15/07 4-2 DAILY MAINTENANCE 1. Shake down bag daily. 2. Check power cord for damaged or frayed insulation. 3. Return brush adjustment lever to “STORE” position when the machine is not in use. 4. Check for and remove any lint or debris around br ush a nd brush housing.
WIRING DIAGRAM WAV 86038510 05/15/07 4-3 880246 880250 POWER CORD BLK GRN BLK WHT 88349 EXHAUST SCREEN 76149 GROUND POST 87016 57104 880247 57104 BLK 880247 SWITCH MAIN 88220 WHT MOTOR VAC WHT BLK BLK 76070 SWITCH BOX SCREW 880253 GRN BRUSH 3 AMP 880248 BLK C.
MAINTENANCE WAV 86038510 05/15/07 4-4 SERVICE SCHEDULE MAINTENANCE DAILY WEEKLY MONTHLY QUARTERLY Check bag and replace if necessa ry * Check filters and repla ce if necessary * Check hose s f or wear.
WAV 86038510 05/15/07 4-5 THIS PAGE LEFT BLANK INTENTIONALLY.
BRUSH AND DRIVE GROUP WAV 86038510 04/08/08 5-1 BRUSH DRIVE MOTOR ASSEMBLY Vacuum Door Assembly 16 15 25 26 27 5 3 12 6 9 7 4 11 12 28 18 43 44 42 41 38 40 39 37 38 19 21 20 21 22 10 30 22 36 2 35 34 .
BRUSH AND DRIVE GROUP PARTS LIST WAV 86038510 10/23/08 5-2 REF PART NO. PRV NO. QTY DESCRIPTION SERIAL NO. FROM NOTES: 1 86031700 14384 1 BODY, WAV 2 86011010 89199 1 WELDMENT, HOSE CONNECT 3 86229050 14342 2 BEARING BLOCK 4 86008210 73998 2 SPACER, .
BRUSH HEIGHT AND WHEEL GROUP WAV 86038510 07/24/07 5-3 MAIN FRAME ASSEMBLY 4 8 14 10 6 22 20 20 24 21 19 16 5 23 24 12 7 17 24 3 21 19 9 1 2 19 15 18 11 13.
BRUSH HEIGHT AND WHEE L GROUP PARTS LI ST WAV 86038510 07/24/07 5-4 REF PART NO. PRV NO. QTY DESCRIPTION SERIAL NO. FROM NOTES: 1 86005860 57273 1 NUT, 1/4-20 X 12MM HEX BARREL 2 86008200 73996 1 SPACER, .
VACUUM GROUP WAV 86038510 05/15/07 5-5 6 5 14 13 4 9 10 7A, 7B (BRUSH SET) 17 8 11 15 16 12 1 2 3.
VACUUM GROUP PARTS LIST WAV 86038510 05/15/07 5-6 REF PART NO. PRV NO. QTY DESCRIPTION SERIAL NO. FROM NOTES: 1 86276040 70586 5 SCR, 1/4-20 X 3/4 BLK PPHTC 2 86064180 36185 1 GUARD, BELT 3 86010650 8.
HANDLE GROUP WAV 86038510 05/15/07 5-7 23 31 29 5 21 32 34 27 25 33 3 4 24 HANDLE ASSEMBLY - DETAIL - 19 22 27 9 14 28 20 11 35 36 18 10 26 17 30 13 12 8 15 16 6 7 28 27 1 HANDLE ASSEMBLY 2 37.
HANDLE GROUP PARTS LIST WAV 86038510 01/10/09 5- 8 REF PART NO. PRV NO. QTY DESCRIPTION SERIAL NO. FROM NOTES: 1 86274640 70253 1 SCR, 10-32 X 1.25 PPHMS 2 86076510 38272 1 HANDLE, MAIN 3 86268300 882.
LID/DECAL GROUP WAV 86038510 05/15/07 5-9 17 18 14 15 13 4 1 2 3 10 8,9 5 16 12 6 7 11.
LID/DECAL GROUP PARTS LIST WAV 86038510 05/15/07 5-10 REF PART NO. PRV NO. QTY DESCRIPTION SERIAL NO. FROM NOTES: 1 86003780 35171 1 GASKET, ACCESSORY PORT 2 86234760 27674 1 COVER, ACCESSORY PORT 3 86006500 70024 2 SCR, #8 X 1/2 SHT METAL SS 4 86031930 51335 1 LID, WAV 5 86237590 35207 2 GASKET, FOAM 1/2 X 10 6 86255240 73838 1 SPRING, .
ELECTRICAL PANEL AND COVER GROUP WAV 86038510 05/15/07 5-11 1 2 3 4 5 4 18 7 10 11 12 13 14 16 17 19 15 NUTS SUPPLIED WITH CIRCUIT BREAKER NUT SUPPLIED WITH SWITCH 6.
ELECTRICAL PANEL & CO VER GROUP PARTS LIST WAV 86038510 05/15/07 5-12 REF PART NO. PRV NO. QTY DESCRIPTION SERIAL NO. FROM NOTES: 1 86234300 23672 1 CORD ASM, 115V 2 86279220 87104 1 WASHER, 1/2 EXT.
SUGGESTED SPARE PARTS WAV 86038510 05/15/07 5-13 PART NO. PRV NO. DESCRIPTION SERIAL NO. FROM NOTES: 86001090 11041 BELT, 220 J-6 POLY-V 86215090 140949 BAGS, PAPER (PKG.
An important point after buying a device Windsor WAV 10125050 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Windsor WAV 10125050 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Windsor WAV 10125050 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Windsor WAV 10125050 you will learn all the available features of the product, as well as information on its operation. The information that you get Windsor WAV 10125050 will certainly help you make a decision on the purchase.
If you already are a holder of Windsor WAV 10125050, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Windsor WAV 10125050.
However, one of the most important roles played by the user manual is to help in solving problems with Windsor WAV 10125050. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Windsor WAV 10125050 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
