Instruction/ maintenance manual of the product XIS100 Xantech
Go to page of 12
08905180D - 1 - MODEL XIS100 Integration Dock for iPod® INSTALLATION INSTRUCTIONS.
08905180D - 2 - DESCRIPTION Xantech's ‘XIS100' docking station is the industry' s first iPod docking station designed for the hi- resolution television revolution.
08905180D - 3 - QUICK START STEP 1: Connect the XIS100 to the power supply and use the included A/V cable to connect to a com posite video and audio amplifier. The XIS100 is preconfigured for composite video support. Direct the handheld remote control to the XIS100 and press the ‘power’ button.
08905180D - 4 - BASIC CONNECTIONS The XIS100 is ready to be used right out of the box. Simply connect a power supply and determine if composite or component video is requi red. In all cases, the A/V cable must be used to provide left and right audio connections.
08905180D - 5 - NOTE 1: The XIS100 is shipped with composite video output selection. To change to component video, first connect the composite video output, t hen proceed through the ‘settings’ on the on-screen display. In the ‘Settings’ menu, select “T V Out” and then “Component” to set the XIS100 to component video output.
08905180D - 6 - REMOTE CONTROL BUTTON CONTROL Main Menu Whenever pressing this button, you can go back to the Main Menu. With XIS100 in stand-by, pressing and holding this key for 5 seconds will reset all settings of the XIS100. The TV will display a confirmation screen.
08905180D - 7 - BASE STATION – FRONT VIEW BASE STATION 1 Dock Well Connects to the iPod connector. Gently slide the iPod unit into the vertical connector and verify it is not tilted. Included with the XIS100 is a Dock Well adaptor for all iPod units.
08905180D - 8 - BASE STATION – REAR VIEW BASE STATION 4 Video Format This selector switch is used to select NTSC or PAL format. (See NOTE 2 on Page 6) 5 IR IN Modulated IR. Connect to a Xantech IR bus system. 6 RS232/422 Connect to RS232 or RS422 communications devices.
08905180D - 9 - SETTINGS MENU NOTE: The XIS100 will retain all its settings until they are changed again. To return the XIS100 to its default settings, place the XIS100 in standby (connected to a power supply, but not turned on). Point the remote towards the XIS100 and press and hold down the “MENU” button on the remote for more than 5 seconds.
08905180D - 10 - About XIS100: This selection will indicate the firmware ve rsion and any additional XIS100 information. RS422 ADAPTORS Part number RJ45-to-DB9 Adaptor Description 06500833 Interfaces .
08905180D - 11 - Xantech Limited Warranty (Effective for products sold after July 1, 2006) Xantech Corporation (“Xa ntech”) warrants to the holde r of a valid proof of purcha se as the first end-u.
08905180D - 12 - ADDITIONAL NOTES: THREADED INSERT FOR INSTALLATION OF BASE UNIT IN PUBLIC PLACES: A) Remove the two race track shaped bump-ons from the bottom of the docking station to expose two threaded inserts. B) Use M4x0.7 machine screws (not supplied) to secure the XIS100 base unit in place.
An important point after buying a device Xantech XIS100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Xantech XIS100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Xantech XIS100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Xantech XIS100 you will learn all the available features of the product, as well as information on its operation. The information that you get Xantech XIS100 will certainly help you make a decision on the purchase.
If you already are a holder of Xantech XIS100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Xantech XIS100.
However, one of the most important roles played by the user manual is to help in solving problems with Xantech XIS100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Xantech XIS100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
