Instruction/ maintenance manual of the product Flex Necks SPEC FN-1.1 Bernard
Go to page of 2
Easily adjusted to fi t any angle and save time and money for changing out an inventorying expensive specialty guns. Fit all Q-Guns™ and S-Guns™ - from 150 - 600 Amps. Cha nge ove r a nd rot ate wi tho ut too ls. Sta y-T i te™ co nne cti on imp rov es con duc tiv ity for better weld quality , lessens heat to increase operator comfort.
© 2006 Bernard Printed in U.S.A. A vailable Flex Necks & Installation Instructions • Allow neck to cool before removing or installing gas diffuser! • Do not overtighten diffuser onto flex-neck! • Excessive tightening/twisting can lead to premature failure! IMPORT ANT! Use two hands to bend the flexible head assembly as shown.
An important point after buying a device Bernard Flex Necks SPEC FN-1.1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bernard Flex Necks SPEC FN-1.1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bernard Flex Necks SPEC FN-1.1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bernard Flex Necks SPEC FN-1.1 you will learn all the available features of the product, as well as information on its operation. The information that you get Bernard Flex Necks SPEC FN-1.1 will certainly help you make a decision on the purchase.
If you already are a holder of Bernard Flex Necks SPEC FN-1.1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bernard Flex Necks SPEC FN-1.1.
However, one of the most important roles played by the user manual is to help in solving problems with Bernard Flex Necks SPEC FN-1.1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bernard Flex Necks SPEC FN-1.1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
