Instruction/ maintenance manual of the product 976-0212-01-01 Rev A Xantrex Technology
Go to page of 4
This errata applies to the R V Series Re mote Control Ow ner ’ s Manual (Document Part Number 975-0210-01-01 Rev ision A). The following correc tion applies throughout the manual: • The Charge and Batt. Full LE D indi cators are orange (n ot yellow).
RC/GS 2 976-0212-01-01 Batt. Full LED Indicator The Batt. Full LED indicator table on page 28 has the following correction: • The Batt. Full indicator LED is solid when the battery is charged 9 0% or higher (not flash ing).
Errata 976-0212-01-01 3 Charger Mode Messages The following subsection s of “Charg er Mode Messages” have corrections. Absorption Charging “Absorption Char ging” on page 35 has the following corrections: • In Absorption mode, the Charge LED indicator is solid (not flashing).
RC/GS 4 976-0212-01-01 The following text replaces the first paragraph under “Equalizing Charging” on page 36. T o activate Equalize mode, press and hold the S ettings button (right arrow) until the screen clears and Equalizing appears (approximately 6 seconds).
An important point after buying a device Xantrex Technology 976-0212-01-01 Rev A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Xantrex Technology 976-0212-01-01 Rev A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Xantrex Technology 976-0212-01-01 Rev A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Xantrex Technology 976-0212-01-01 Rev A you will learn all the available features of the product, as well as information on its operation. The information that you get Xantrex Technology 976-0212-01-01 Rev A will certainly help you make a decision on the purchase.
If you already are a holder of Xantrex Technology 976-0212-01-01 Rev A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Xantrex Technology 976-0212-01-01 Rev A.
However, one of the most important roles played by the user manual is to help in solving problems with Xantrex Technology 976-0212-01-01 Rev A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Xantrex Technology 976-0212-01-01 Rev A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
