Instruction/ maintenance manual of the product ML501 Xilinx
Go to page of 28
ML501 QuickStart May 2008.
Overview • Setup • Boot with ACE-loader ACE File • Observe LCD and Terminal messages • Load new Configuration • Re-load ACE-loader.
ML501 MicroBlaze Hardware • The ML501 MicroBlaze design hardware includes: – DDR2 Interface (256 MB) – BRAM – External Memory Controller (EMC) • ZBT SRAM, Flash, and USB – Networking – U.
Additional Setup Details • Refer to ml501_overview_setup document for details on: – Software Requirements – ML501 Board Setup • Equipment and Cables • Software • Network – Terminal Progr.
Hardware Setup • Connect the Xilinx Parallel Cable IV (PC4) to the ML501 board • Connect the RS232 null modem cable to the ML501 board Note: Presentation applies to the ML501.
Hardware Setup • The ML501 uses a DVI video interface • Connect a DVI monitor or • Use a DVI/VGA adapter to connect a VGA monitor – http://www.
Hardware Setup • USB Keyboard – www.dell.com Note: Presentation applies to the ML501.
Factory CompactFlash • The CompactFlash shipped with the ML501 board has the following ace files preloaded: Note: Presentation applies to the ML501.
Select Boot Configuration • Insert the Factory CompactFlash into the ML501 board (1) • Set the DIP switches as seen here (00010101) (2) • Power-up the ML501 board Note: Presentation applies to t.
Bootload • The system_bootload.ace loads: Note: Presentation applies to the ML501.
Bootload • The terminal window also reflects the bootload application • Use the left/center/right buttons to choose an application or type a number in the terminal window • After each demo, push.
Slideshow • Type 1, to launch the slideshow application in Configuration 1 • The slideshow loads the presentation into memory then presents it Note: Presentation applies to the ML501.
Slideshow • The slideshow app will present a series of slides on the Monitor: Note: Presentation applies to the ML501.
Web Server • Type 2, to launch the web server application in Configuration 2 – Note : You may need to turn off your br owser's proxy and specify a direct connection to the Internet in your browser options Note: Host IP is 1.2.3.9, subnet mask is 255.
Web Server • In your web browser, enter http://1.2.3.4:8080/index.html Note: Presentation applies to the ML501.
Simon • Type 3, to launch the Simon application in Configuration 3 Note: Presentation applies to the ML501.
USB Keyboard • Type 5, to launch the USB Keyboard application in Configuration 5 • Type ML501 and view results: Note: Presentation applies to the ML501.
My ACE • Type 6, to launch the My ACE application in Configuration 6 Note: Presentation applies to the ML501.
Ringtone • Type 7, to launch the Ringtone application in Configuration 7 • Press any key then press 1-7 to play a simple melody Note: Presentation applies to the ML501.
Documentation • Virtex-5 – Silicon Devices http://www.xilinx.com/products/silicon_solutions – Virtex-5 Multi-Platform FPGA http://www.xilinx.com/products/silicon_solutions/fpgas/virtex/virtex5 – Virtex-5 Family Overview: LX, LXT, SXT, and FXT Platforms http://www.
Documentation • Virtex-5 – Virtex-5 FPGA User Guide http://www.xilinx.com/support/docum entation/user_guides/ug190.pdf – Virtex-5 FPGA Configuration User Guide http://www.xilinx.com/support/docum entation/user_guides/ug191.pdf – Virtex-5 System Monitor User Guide http://www.
Documentation • Design Resources – ISE Development Tools and IP http://www.xilinx.com/ise – Integrated Software Environment (ISE) Foundation Resources http://www.xilinx.com/ise/logic_design_prod/foundation.htm – ISE Manuals http://www.xilinx.com/support/software_manuals.
Documentation • Additional Design Resources – Customer Support http://www.xilinx.com/support – Xilinx Design Services: http://www.xilinx.com/xds – Titanium Dedicated Engineering: http://www.xilinx.com/titanium – Education Services: http://www.
Documentation • MicroBlaze – MicroBlaze Processor http://www.xilinx.com/microblaze – MicroBlaze Processor Reference Guide – UG081 http://www.xilinx.
Documentation • Memory Solutions – Demos on Demand – Memory Interface Solutions with Xilinx FPGAs http://www.demosondemand.com/clients/xilinx/001/page_new2/index.asp#35 – Xilinx Memory Corner http://www.xilinx.com/products/design_resources/mem_corner – Additional Memory Resources http://www.
Documentation • Ethernet – Virtex-5 Embedded Tri-Mode Ethernet MAC Wrapper Data Sheet http://www.xilinx.com/support/documentation/ip_documentation/ v5_emac_ds550.pdf – Virtex-5 Embedded Tri-Mode Ethernet MAC Wrapper Getting Started Guide http://www.
Documentation • ML501 – ML501 Overview http://www.xilinx.com/ml501 – ML501 Evaluation Platform User Guide – UG226 http://www.xilinx.com/support/doc umentation/boards_and_kits/ug226.pdf – ML501 Reference Design User Guide – UG227 http://www.
Documentation • ML501 – ML501 Schematics http://www.xilinx.com/support/d ocumentation/boards_and_kits/ ml501_20061010_bw.pdf – ML501 Bill of Material http://www.
An important point after buying a device Xilinx ML501 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Xilinx ML501 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Xilinx ML501 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Xilinx ML501 you will learn all the available features of the product, as well as information on its operation. The information that you get Xilinx ML501 will certainly help you make a decision on the purchase.
If you already are a holder of Xilinx ML501, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Xilinx ML501.
However, one of the most important roles played by the user manual is to help in solving problems with Xilinx ML501. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Xilinx ML501 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center