Instruction/ maintenance manual of the product RX V2095RDS Yamaha
Go to page of 90
OWNER’S MANUAL MODE D’EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING MANUALE DI ISTRUZIONI MANUAL DE INSTRUCCIONES GEBRUIKSAANWIJZING OWNER’S MANUAL MODE D’EMPLOI BEDIENUNGSANLEITUNG BRUKSANVISNING.
Congratulations! Y ou are the proud owner of a Y amaha Digital Sound Field Processing (DSP) System—an extremely sophisticated audio component. The DSP system takes full advantage of Y amaha’ s undisputed leadership in the field of digital audio processing to bring you a whole new world of listening experiences.
1 English CAUTION .................................................................. 2 INTRODUCTION ....................................................... 3 Features .................................................................... 3 What’s DSP? .
2 1. To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2. Install this unit in a cool, dry, clean place – away from windows, heat sources, sources of excessive vibration, dust, moisture and cold.
3 English 7 Channel P ower Amplification Main: 100W + 100W (8 Ω ) RMS Output P ower , 0.02% THD , 20–20,000 Hz Center: 100W (8 Ω ) RMS Output P ower , 0.02% THD , 20–20,000 Hz Rear: 100W + 100W (8 Ω ) RMS Output P ower , 0.02% THD , 20–20,000 Hz Front eff ect: 25W + 25W (8 Ω ) RMS Output P o wer , 0.
4 Welcome to the exciting world of digital home entertainment. This unit is one of the most complete and advanced AV receiver available. Some of the more advanced features may not be familiar to you, but they are easy to use.
5 English Dolby Digital is the next level of Dolby Surround sound system developed for 35 mm film-movies by employing low bit-rate audio coding. Dolby Digital is a digital surround sound system that provides completely independent multi-channel audio to you.
6 Dolby Pr o Logic + 2 Digital Sound Fields Digital sound fields are created on the presence side and the rear surround side of the Dolby Pro Logic Surround- decoded sound field respectively.
7 English GETTING ST AR TED Getting star ted Remote controller User function stickers Indoor FM Antenna AM Loop Antenna Batteries (size AA, LR6, UM-3) Unpac king Carefully remove this unit and accessories from the box. You should find the unit itself and the following accessories.
8 Installing batteries in the remote contr oller Since the remote controller will be used for many of this unit’s control operations, you should begin by installing the supplied batteries. 1. Turn the remote controller over and slide the battery compartment cover in the direction of the arrow.
9 English Contr ols and their functions Fr ont panel NATURAL SOUND AV RECEIVER RX V2095RDS CINEMA DSP 7ch VOLUME INPUT SELECTOR INPUT MODE l6 20 28 40 60 l2 8 4 2 0 –dB PHONES BASS EXTENSION BASS TR.
10 7 SPEAKERS switches Press the switch A or B (or both) for the main speakers you will use to select them. Press the switch for the main speakers you will not use again to cancel them. On the display panel, “SPEAKERS A” and/or “SPEAKERS B” will be illuminated, depending on which main speakers are being selected.
11 English GETTING STARTED K RDS MODE button When an RDS station is received, pressing this button changes the display mode into the PS mode, PTY mode, RT mode and/or CT mode (if the station employs these RDS data services) in turn.
12 Displa y panel DIGITAL PRO LOGIC DSP SPEAKERS AB TAPE/MD CD TUNER PHONO DVD/LD TV/DBS VCR 1 VCR 2 V-AUX MEMORY PS PTY RT CT STEREO AUTO EON PTY HOLD NEWS INFO SPORT AFFAIRS SLEEP 2 7 4 5 6 3 1 9 80 B A CD 1 indicators Either of the “dts” indicators will be illuminated when the built-in DTS decoder is turned on.
13 English This unit has been designed to provide the best sound field quality with a full seven-speaker system setup, using a pair of main speakers to output main source sounds, two extra pairs of effect speakers to generate the sound field plus one center speaker for dialog.
14 4 Speaker System Basic system. You can enjoy widely diffused sound by only adding a pair of rear speakers to a basic stereo speaker system. 1E. SYS. SETUP—Set to 5ch. (See page 29.) 1A. CENTER SP—Set to NONE. (See page 28.) 6 Speaker System Good for sound fields from 2-channel stereo sources.
15 English Caution: Plug in this unit and other components after all connections are completed. All connections must be correct, that is to say L (left) to L , R (right) to R , “ + ” to “ + ” and “ – ” to “ – ”. Also refer to the owner’s manual for each of your components.
16 For connecting with a TV monitor that uses a 21 pin connector for input Make a connection as figured below with a commercially available scart-plug connector cable.
17 English PREPARATION Notes ● When you connect an audio/video unit to both of the digital and analog terminals of this unit, make sure to connect to both terminals of the same name. ● Be sure to attach the covers when the OPTICAL terminals are not being used, in order to protect the terminals from dust.
18 PHONO 1 CD 75 Ω UNBAL. AM ANT FM ANT GND AUDIO SIGNAL GND EXTERNAL DECODER INPUT TAPE/MD 3 4 IN ( PLAY ) OUT ( REC ) MAIN SUB WOOFER CENTER SURROUND DVD/LD TV/DBS IN VCR 1 OUT IN VCR 2 OUT AUDIO .
19 English VIDEO DVD/LD TV/DBS IN VCR 1 OUT IN VCR 2 OUT VIDEO S VIDEO DVD/LD TV/DBS IN VCR 1 OUT IN VCR 2 OUT MONITOR OUT S VIDEO AUDIO SIGNAL VIDEO SIGNAL VIDEO IN S-VIDEO OUT VIDEO OUT VIDEO OUT S-.
20 This unit is equipped with additional 6-channel audio signal input terminals (for left main, right main, center, left rear surround, right rear surround and subwoofer channels) for inputting signals from an external decoder of a future format to this unit.
21 English Speakers SEE INSTRUCTION MANUAL FOR CORRECT SETTING. CENTER FRONT CAUTION MAIN CENTER FRONT REAR ( SURROUND ) PRE OUT MAIN IN SPEAKERS COUPLER OUTPUT A B A B REAR MAIN IMPEDANCE SELECTOR CENTER : 4 Ω MIN. / SPEAKER FRONT :6 Ω MIN. / SPEAKER REAR :6 Ω MIN.
22 WARNING Do not change the IMPEDANCE SELECTOR switch setting while the power to this unit is on, otherwise this unit may be damaged. IF THIS UNIT FAILS TO TURN ON WHEN THE STANDBY/ON SWITCH IS PRESSED: The IMPEDANCE SELECTOR switch may not be set to either end.
23 English The speaker connections described on page 21 are fine for most applications. If for some reason, however, you wish to drive main, center, front effect and/or rear speakers with your existing amplifier, etc., the following terminals are available for connecting external amplifier(s) to this unit.
24 Antennas ● Each antenna should be connected to the designated terminals correctly, as shown in the following figure. ● Both AM and FM indoor antennas are included with this unit. In general, these antennas will probably provide sufficient signal strength.
25 English m Connecting the indoor FM antenna Connect the included indoor antenna to the 75 Ω UNBAL. FM ANT terminal. Note Do not use an outdoor FM antenna and the indoor FM antenna at the same time. GND terminal For maximum safety and minimum interference, connect the GND terminal to a good ground.
26 • After completing all connections, plug the AC power cord into an AC outlet. • Unplug the AC power cord from the AC outlet if this unit is not to be used for a long period of time. ON MANUAL FOR CORRECT SETTING. SPEAKERS A B REAR MAIN SWITCHED AC OUTLETS IMPEDANCE SELECTOR CENTER : 4 Ω MIN.
27 English PREPARATION If you connect your VCR, LD player, video monitor, etc. to this unit, you can take advantage of this unit’s capability to display program titles, parameter data and information for various setting changes and adjustments on your video monitor screen.
28 1A. CENTER SP Choices: LARGE (LRG)/SMALL (SML)/NONE Preset position: LRG LRG : When your center speaker is approximately the same size as the main speakers.
29 English 1C. MAIN SP Choices: LARGE/SMALL Preset position: LARGE LARGE : If your main speakers have a high ability for bass reproduction. In this position, full range signals present at the main channels are output from the main speakers. SMALL : If your main speakers do not have a high ability for bass reproduction.
NATURAL SOUND AV RECEIVER RX V2095 RDS CINEMA DSP 7ch VOLUME INPUT SELECTOR INPUT MODE l6 20 28 40 60 l2 8 4 2 0 –dB PHONES BASS EXTENSION BASS TREBLE BALANCE TONE BYPASS VIDEO AUX EFFECT A/B/C/D/E A SPEAKERS B PROGRAM PRESET STATIONS TUNING EXT.
NATURAL SOUND AV RECEIVER RX V2095 RDS CINEMA DSP 7ch VOLUME INPUT SELECTOR INPUT MODE l6 20 28 40 60 l2 8 4 2 0 –dB PHONES BASS EXTENSION BASS TREBLE BALANCE TONE BYPASS VIDEO AUX EFFECT A/B/C/D/E A SPEAKERS B PROGRAM PRESET STATIONS TUNING EXT.
NATURAL SOUND AV RECEIVER RX V2095 RDS CINEMA DSP 7ch VOLUME INPUT SELECTOR INPUT MODE l6 20 28 40 60 l2 8 4 2 0 –dB PHONES BASS EXTENSION BASS TREBLE BALANCE TONE BYPASS VIDEO AUX EFFECT A/B/C/D/E A SPEAKERS B PROGRAM PRESET STATIONS TUNING EXT.
33 English 11 For the front effect speaker level adjustment, press the TEST key on the remote controller again so that “TEST DSP” appears on the display. A calibration signal should be heard from the main speakers and the front effect speakers in turn.
NATURAL SOUND AV RECEIVER RX V2095 RDS CINEMA DSP 7ch VOLUME INPUT SELECTOR INPUT MODE l6 20 28 40 60 l2 8 4 2 0 –dB PHONES BASS EXTENSION BASS TREBLE BALANCE TONE BYPASS VIDEO AUX EFFECT A/B/C/D/E A SPEAKERS B PROGRAM PRESET STATIONS TUNING EXT.
NATURAL SOUND AV RECEIVER RX V2095 RDS CINEMA DSP 7ch VOLUME INPUT SELECTOR INPUT MODE l6 20 28 40 60 l2 8 4 2 0 –dB PHONES BASS EXTENSION BASS TREBLE BALANCE TONE BYPASS VIDEO AUX EFFECT A/B/C/D/E A SPEAKERS B PROGRAM PRESET STATIONS TUNING EXT.
36 When y ou finish using this unit Press the STANDBY/ON switch on the front panel or the STANDBY key on the remote controller to enter the standby mode. T o select the source connected to this unit’ s EXTERNAL DECODER INPUT terminals as the input source.
37 English v For CD, TAPE/MD and TV/DBS sources: The following three input modes are provided. AUTO: This mode is automatically selected when you turn on the power of this unit. In this mode, input signal is automatically selected by the following order of priority.
38 Notes on input mode selection ● The input mode for a TV/DBS source is selected with function “7. TV/DBS INPUT” in the SET MENU mode. This unit will be automatically set to the selected input mode when the power is turned on. ● Set the input mode to the AUTO or D.
NATURAL SOUND AV RECEIVER RX V2095 RDS CINEMA DSP 7ch VOLUME INPUT SELECTOR INPUT MODE l6 20 28 40 60 l2 8 4 2 0 –dB PHONES BASS EXTENSION BASS TREBLE BALANCE TONE BYPASS VIDEO AUX EFFECT A/B/C/D/E A SPEAKERS B PROGRAM PRESET STATIONS TUNING EXT.
NATURAL SOUND AV RECEIVER RX V2095 RDS CINEMA DSP 7ch VOLUME INPUT SELECTOR INPUT MODE l6 20 28 40 60 l2 8 4 2 0 –dB PHONES BASS EXTENSION BASS TREBLE BALANCE TONE BYPASS VIDEO AUX EFFECT A/B/C/D/E A SPEAKERS B PROGRAM PRESET STATIONS TUNING EXT.
41 English Notes on recording ● The VOLUME, BASS, TREBLE, BALANCE controls, the BASS EXTENSION button and the settings of DSP have no effect on the material being recorded. ● Composite video and S video signals pass independently through this unit’s video circuits.
NATURAL SOUND AV RECEIVER RX V2095 RDS CINEMA DSP 7ch VOLUME INPUT SELECTOR INPUT MODE l6 20 28 40 60 l2 8 4 2 0 –dB PHONES BASS EXTENSION BASS TREBLE BALANCE TONE BYPASS VIDEO AUX EFFECT A/B/C/D/E A SPEAKERS B PROGRAM PRESET STATIONS TUNING EXT.
NATURAL SOUND AV RECEIVER RX V2095 RDS CINEMA DSP 7ch VOLUME INPUT SELECTOR INPUT MODE l6 20 28 40 60 l2 8 4 2 0 –dB PHONES BASS EXTENSION BASS TREBLE BALANCE TONE BYPASS VIDEO AUX EFFECT A/B/C/D/E A SPEAKERS B PROGRAM PRESET STATIONS TUNING EXT.
NATURAL SOUND AV RECEIVER RX V2095 RDS CINEMA DSP 7ch VOLUME INPUT SELECTOR INPUT MODE l6 20 28 40 60 l2 8 4 2 0 –dB PHONES BASS EXTENSION BASS TREBLE BALANCE TONE BYPASS VIDEO AUX EFFECT A/B/C/D/E A SPEAKERS B PROGRAM PRESET STATIONS TUNING EXT.
NATURAL SOUND AV RECEIVER RX V2095 RDS CINEMA DSP 7ch VOLUME INPUT SELECTOR INPUT MODE l6 20 28 40 60 l2 8 4 2 0 –dB PHONES BASS EXTENSION BASS TREBLE BALANCE TONE BYPASS VIDEO AUX EFFECT A/B/C/D/E A SPEAKERS B PROGRAM PRESET STATIONS TUNING EXT.
NATURAL SOUND AV RECEIVER RX V2095 RDS CINEMA DSP 7ch VOLUME INPUT SELECTOR INPUT MODE l6 20 28 40 60 l2 8 4 2 0 –dB PHONES BASS EXTENSION BASS TREBLE BALANCE TONE BYPASS VIDEO AUX EFFECT A/B/C/D/E A SPEAKERS B PROGRAM PRESET STATIONS TUNING EXT.
47 English BASIC OPERATION RDS (Radio Data System) is a data transmission system gradually being introduced by FM stations in many countries. Stations using this system transmit an inaudible stream of data in addition to the normal radio signal.
48 BASIC OPERATION News: Short accounts of facts, events and publicly expressed views, reportage and actuality. Current affairs: Topical program expanding or enlarging upon the news, generally in different presentation style or concept, including documentary debate, or analysis.
49 English BASIC OPERATION m Changing the RDS modes When an RDS station is received, “PS”, “PTY”, “RT” and/or “CT” that correspond to the RDS data services employed by the station light up on the display.
NATURAL SOUND AV RECEIVER RX V2095 RDS CINEMA DSP 7ch VOLUME INPUT SELECTOR INPUT MODE l6 20 28 40 60 l2 8 4 2 0 –dB PHONES BASS EXTENSION BASS TREBLE BALANCE TONE BYPASS VIDEO AUX EFFECT A/B/C/D/E A SPEAKERS B PROGRAM PRESET STATIONS TUNING EXT.
NATURAL SOUND AV RECEIVER RX V2095 RDS CINEMA DSP 7ch VOLUME INPUT SELECTOR INPUT MODE l6 20 28 40 60 l2 8 4 2 0 –dB PHONES BASS EXTENSION BASS TREBLE BALANCE TONE BYPASS VIDEO AUX EFFECT A/B/C/D/E A SPEAKERS B PROGRAM PRESET STATIONS TUNING EXT.
NATURAL SOUND AV RECEIVER RX V2095 RDS CINEMA DSP 7ch VOLUME INPUT SELECTOR INPUT MODE l6 20 28 40 60 l2 8 4 2 0 –dB PHONES BASS EXTENSION BASS TREBLE BALANCE TONE BYPASS VIDEO AUX EFFECT A/B/C/D/E A SPEAKERS B PROGRAM PRESET STATIONS TUNING EXT.
NATURAL SOUND AV RECEIVER RX V2095 RDS CINEMA DSP 7ch VOLUME INPUT SELECTOR INPUT MODE l6 20 28 40 60 l2 8 4 2 0 –dB PHONES BASS EXTENSION BASS TREBLE BALANCE TONE BYPASS VIDEO AUX EFFECT A/B/C/D/E A SPEAKERS B PROGRAM PRESET STATIONS TUNING EXT.
54 m T o enjoy a video sour ce encoded with Dolb y Pro Logic Surr ound, Dolb y Digital or DTS When you select the program No. 10, 11 or 12, and the input signal of the source is 2-channel stereo, Dolby Pro Logic Surround is decoded.
55 English Adjusting output level of the center , right rear , left rear , front effect speaker s and subw oofer You can adjust the sound output level of the each speaker even if the output level is already set in “Speaker balance adjustment” on pages 31 to 33.
56 Notes ● Once the output level is adjusted, the level value will be the same in all the digital sound field programs. ● The value of each speaker output level you set the last time will remain memorized even when this unit is in the standby mode.
57 English The following list gives you a brief description of the sound fields produced by each of the DSP programs. Keep in mind that most of these are precise digital recreations of actual acoustic environments. The data for these sound fields were recorded at actual locations using sophisticated sound field measurement equipment.
58 FEATURE This is the sound field at stage front in “The Bottom Line”, a famous New York Jazz club. The floor can seat 300 people to the left and right in a sound field offering real and vibrant sound. A jazz club in New York. It is in a basement and has a relatively spacious floor area.
59 English FEATURE Provides excellent depth of vocals and overall clarity, restraining excessive reverberation. For opera, the orchestra pit and the stage are ideally combined, letting you feel a full presence sound.
60 FEATURE Creates the extremely wide sound field of a movie theater. It precisely reproduces the source sound in detail, giving both the video and the sound field incredible reality. Any kind of video sources encoded with Dolby Surround or DTS (especially large-scale movie productions) are ideal for use with this program.
61 English FEATURE The built-in Dolby Pro Logic Surround decoder, the Dolby Digital decoder or the DTS decoder precisely reproduces sounds and sound effects of a source encoded with Dolby Surround or DTS.
62 AD V ANCED FEA TURES Refer to the information in the display panel or monitor screen during operation. The monitor power must be turned on to display information on the monitor. 1 Set the PARAMETER/SET MENU switch on the remote controller to the SET MENU position.
63 English 1. SPEAKER SET (Selecting the output modes suitable for y our speaker system) Refer to pages 28 to 30 for details. (Once you have selected proper modes, you do not have to make a setting change, unless your speaker system is modified.) m Function description 2.
64 ADVANCED FEATURES 4. CENTER DELA Y [Adjusting the delay of center sounds (dialog etc.)] ● Control range: 0 ms to 5 ms (in 1 ms step) Preset value: 0 ms ● This adjustment is effective only when Dolby Digital or DTS is decoded and the signals of the selected source encoded with Dolby Digital or DTS contain center channel signals.
65 English 7. TV/DBS INPUT (Selecting the initial input mode of the source connected to the TV/DBS input terminals) For the source connected to the TV/DBS input terminals of this unit, you can designate the input mode that is automatically selected when the power of this unit is switched on.
66 What is a sound field? In order to explain the impressive functions of the DSP, we need to first understand what a sound field really is. What really creates the rich, full tones of a live instrument are the multiple reflections from the walls of the room.
67 English m Selecting and editing pr ogram parameters This adjustment can be made only by using the remote controller and watching the monitor screen or the display panel. Note Information on the monitor screen would be easier to see than the display panel.
68 m Descriptions of the digital sound field parameters Not all of the following parameters are found in every program. ● ROOM SIZE How it Affects the Sound: Changes the apparent size of the music venue. The larger the value, the larger the simulated room will sound.
69 English ● LIVENESS How it Affects the Sound: This parameter changes the apparent reflectivity of the walls in the hall. The early reflections from a sound source will lose intensity (decay) much faster in a room with acoustically absorbent wall surfaces than in one which has mostly reflective surfaces.
70 ● REV . LEVEL (Reverberation Le vel) This parameter adjusts the volume of the reverberation sound. The larger the value, the stronger the reverberation becomes. Control Range: 0 – 100% ● S. DELA Y (Surround Dela y) Adjusts the delay between the direct sound and the first reflection on the rear surround side sound field.
71 English 1 Select the source using the INPUT SELECTOR and start playback (or select a broadcast station) on the source unit. 2 Press the SLEEP key repeatedly until the desired SLEEP time appears on the display. * “SLEEP time” is the time that elapses before this unit is automatically turned into the standby mode.
72 The remote controller is designed to control the most commonly used functions. If the CD player, tape deck, LD player, etc. is a YAMAHA component with remote control compatibility, this remote controller will also control various functions. * For basic operations, the cover must be opened.
73 English REMOTE CONTROLLER 1 TAPE/MD keys These keys control tape decks or MD recorders. The A/B/C switch ( I ) should be set to the “A” position to control tape decks, and “C” position for MD recorders. * The DIR A, B and A/B keys apply only to double cassette tape decks.
74 REMOTE CONTROLLER This is a learning remote controller. The shaded keys in the illustration shown below can be programmed to “learn” control functions from other remote controllers. This unit can be used in place of other remote controllers by learning their functions.
75 English Notes • Area A cannot learn a new function. To store a new function, store it onto area B or C. • If a key which has a preset function learns a new function, the preset function will not work but is not deleted. When the learned function is cleared, the preset function is restored.
76 REMOTE CONTROLLER When the cover of the remote controller is closed, you can easily operate Yamaha components including learned functions by using the OPERATION CONTROL keys. REMOTE CONTROL TRANSMITTER TAPE/MD CD TUNER VCR 1 VCR 2 DVD/LD V-AUX EXT.
77 English REMOTE CONTROLLER Notes • If an OPERATION CONTROL key is substituted for a key which has no function (empty), then a command will not be carried out. Depending on your plan, store functions from other remote controllers into an empty area of those keys.
78 REMOTE CONTROLLER Macr o operations (Cover is c losed) REMOTE CONTROL TRANSMITTER TAPE/MD CD TUNER VCR 1 VCR 2 DVD/LD PHONO V-AUX EXT. DEC. TV/DBS TV VCR MUTE MASTER VOLUME OPERATION CONTROL EFFECT.
79 English REMOTE CONTROLLER Macro key 1st (Turns on this unit.) 2nd (Selects an input source.) 3rd (Starts playback of a source.) “” on area A of keys 1 “” on area A of keys 2 – “” on a.
80 REMOTE CONTROLLER m Learning a new function 1 Place this remote controller and the other remote controller so that they face each other. 2 * If there is no operation for about 30 seconds after the LEARN button is pressed, the TRANSMIT/LEARN indicator flashes rapidly and the current mode is canceled.
m Making a new macr o A new macro can be programmed onto any preset macro key in place of the factory preset functions. (See page 78 to know what keys are preset macro keys.) You can make as many as 13 new macro keys. A macro key can learn as many as seven functions of other keys.
82 REMOTE CONTROLLER 1 To clear a learned key function, press the LEARN button using a ball-point pen or similar object. To clear a macro you made, press the MACRO button.
83 English Refer to the chart below when this unit does not function properly. If the problem you are experiencing is not listed below or if the instruction below does not help, disconnect the power cord and contact your authorized YAMAHA dealer or service center.
84 TROUBLESHOOTING Problem The remote controller does not work. The remote controller does not function properly. Learning cannot be made successfully. (The TRANSMIT/LEARN indicator does not light up or flash.) Continuous functions such as volume are learned, but operate only for a moment before stopping.
85 English TROUBLESHOOTING Problem A loud hissing noise is heard when you play back a source encoded with DTS. A percussive noise is heard when you begin playing back a source encoded with DTS. No sound is heard when you play back a source encoded with DTS, even though the “AUTO” or “DTS” input mode is selected on this unit.
86 A UDIO SECTION Minimum RMS Output Power Per Channel (When both channels are driven) MAIN L/R (20 Hz to 20 kHz, 0.02% THD, 8 ohms) ....................... 100W+100W CENTER (20 Hz to 20 kHz, 0.02% THD, 8 ohms) ................................... 100W REAR L/R (20 Hz to 20 kHz, 0.
87 English SPECIFICATIONS Signal-to-Noise Ratio (IHF) Mono/Stereo [U.S.A., Canada, China and General models] ....................................81 dB/75 dB (DIN-Weighted, 40 kHz Dev.) Mono/Stereo [Europe, Australia and Singapore models] .............
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 25462 RELLINGEN BEI HAMBURG, F.
An important point after buying a device Yamaha RX V2095RDS (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Yamaha RX V2095RDS yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Yamaha RX V2095RDS - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Yamaha RX V2095RDS you will learn all the available features of the product, as well as information on its operation. The information that you get Yamaha RX V2095RDS will certainly help you make a decision on the purchase.
If you already are a holder of Yamaha RX V2095RDS, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Yamaha RX V2095RDS.
However, one of the most important roles played by the user manual is to help in solving problems with Yamaha RX V2095RDS. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Yamaha RX V2095RDS along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
