Instruction/ maintenance manual of the product YSP-40D Yamaha
Go to page of 129
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGE THORPE AVE., BUEN A PARK, CALIF. 90 620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER A VE., SCARBOR OUGH, ONTAR IO M1S 3R1, C ANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 2 5462 RELLINGEN BEI HAMB URG, GERMANY YAMAHA ELECTRONIQUE FRANCE S.
CAUTION: READ THIS BEFORE OPERATING THIS UNIT. i En 1 T o ass ure the finest perfo rmance, plea se read thi s manual carefull y . Keep it in a safe pl ace for fut ure refe rence.
PREP ARA TION INTRODUCTION BA S I C OPERA TION AD V ANC ED OPERA TION ADDITIONA L INFORMA TION SETUP English 1 En Overview ... ............ ............ .......... ............ ............ .... 2 Featur es ...... ............ .......... ............ .
Overvi ew 2 En It is generally accepted that in order to fully enjoy the benef its of su rround sound at home, you must endure the agon y of wiring and installing a great number of spea kers in the hop e that your listening room will gi ve you the same kind of surround sound experience as your local mo vie theater .
Features 3 En INTRODUCTION English Digital Sound Projector™ The Digital Sound Projector te chnology allows one slim unit to control and steer multiple channels of sound to generate multi-channel surr ound sound, thus eliminates the need for satell ite loudsp eakers and cabling normally associated with con venti onal surround sound systems.
Features 4 En The “ ” logo and “IntelliB eam” are trademarks of Y AMAHA Corporation. The “ ” logo and “Cinema DSP” are registered trademarks of Y AMAHA Corporation. Manufactured under licen se from Dolby Laborator ies. “Dolby”, “Pro Logic”, and the double-D symbol are trademarks of Dolby Laboratories.
Using this manual 5 En INTRODUCTION English • This manual describes how to connect and operate th is unit. F or details regarding the operation of external components, refer to the supplied owner’ s manual for e ach component. • Operations in this manual use keys on the supplied remote control of this unit unless otherwise specified.
Supplied accessories 6 En Check that you hav e recei ved all of the follo wing parts. Supplied accessories STEREO MY SUR. MY BEAM MEMORY SEARCH SLEEP INPUTMODE ENHANCER MENU RETURN DISPLA Y TV VOL VOLUME MUTE CH LEVEL TEST TV INPUT TV MUTE ENTER SUR.
Controls and functions 7 En INTRODUCTION English 1 Fro nt panel displa y Shows in formation about the operational status of this unit. 2 Remote control sensor Receiv es infrared signals from the remote control. 3 A UX 3 in put jack Connect your portable audio player (see page 24).
Controls and functions 8 En 1 HDMI indicator Lights up when the signal of the selected input source is input at the HDMI IN jack(s). 2 TUNER indicators Light up when this unit is receiving a D AB service (see page 49). 3 D AB indicator Lights up when D AB (Digital Audio Broadcasting) is selected as the input source (see page 49).
Controls and functions 9 En INTRODUCTION English 1 A UX 1 HDM I IN jack Connect your digital satellite t uner , cable TV tu ner , digital air wa ve tuner , or game console via an HDMI connection (see page 19). 2 D VD HDMI IN jac k Connect your D VD player via an HDMI connection (see page 19).
Controls and functions 10 En E VIDEO OUT jack Connect to the video input jack of your TV via a composite analog video connect ion to display the OSD of this unit (see page 20). F COMPONENT VIDEO OUT jac ks Connect to the video input jacks of your TV via a component analog video connect ion to display the OSD of this unit (see page 20).
Controls and functions 11 En INTRODUCTION English This section describes the func tions of the remote control used to control this unit. Some b uttons mark ed with an asterisk ( * ) share the common functions between the YSP and TV/A V opera tion modes ( R ).
Controls and functions 12 En F D VD pla y er/VCR contr ol b uttons Control your D VD player or VCR (see pages 109 and 110). G My Beam microphone Collects the test tones from this unit when using the My Beam auto-adjust f unction (see page 67 ). H TV PO WER T urns on the po wer of your TV or sets it to the standby mode (see page 108).
Controls and functions 13 En INTRODUCTION English This section describes the func tions of the remote control used to control D AB or iPod when the TV/A V mode is selected with the ope ra tion mode selector ( 7 ). 1 SEARCH D AB: Switche s between the D AB tuning modes (see page 49).
Installatio n 14 En This section describes a suitable installation locat ion to install this unit using a metal w all bracket, a rack or a stand. Depending on your installation en vironment, connections with extern al components can be done before installing this unit.
15 En Installatio n PREP ARA TION English ■ Installati on exa mples Example 1 Install this unit as cl ose to the e xact center of the w all as possible. Example 2 Install this unit so that the sound beams can be reflected off the walls. Example 3 Install this unit as close to the exact front of your normal listening positio n as possible.
16 En Installatio n ■ Using a metal wall bracket Y ou can use the optional metal wall bracket (such as SPM- K30) to mount this unit on the wall in your listening room. y Refer to the instructions supp lied with the metal bracket for details on how to attach the meta l bracket to the wall or ho w to attach this unit to the metal bracket.
Connections 17 En PREP ARA TION English This unit is equipped with the following types of audio/video input/out put jacks/terminal: For audio input • 2 optical digital input jacks • 2 coaxial digi.
18 En Connec tions ■ Cables used f or conn ections HDMI cable A udio pin cable (suppl ied) Optical cable (suppl ied) Digital audio p in cable (supplied) 3.
19 En Connections PREP ARA TION English This unit is equipped with 2 HDMI input jacks and 1 HDMI ou tput jack. If your TV and other components ha v e HDMI jacks, use HDMI cables for simpler and easier conne ctions, and you can skip the connection procedures from page 20 to 23.
20 En Connec tions For audio connection, connect the analog audio output jacks on you r TV to th e TV/STB A UDIO IN jacks on this unit. If your TV has an optical digita l output jack, connect the opt ical digital output jack on your TV to the TV/STB OPTICAL DIGIT AL IN jack on this unit.
21 En Connections PREP ARA TION English For audio connection, connect the coax ial digital output jack on your D VD player/recorder to the D VD CO AXIAL DIGIT AL IN jack on this unit.
22 En Connec tions For audio connection, conne ct the optical digital output jack on your digital satellite tuner or cable TV tuner to th e TV/ STB OPTICAL DIGIT AL IN jack on this un it. Connect the analog audio output jack s on your digital satellite tuner or cable TV tuner to the TV/STB A UDIO IN jacks on this unit.
23 En Connections PREP ARA TION English For audio connection, connect the TV/STB A UDIO IN jacks on this unit to the analog audio output jacks on your TV . Connect the optical digital output jack on your digital airwa ve tuner to the TV/S TB OPTICAL DIGIT AL IN jack on this unit in addition to the analog audio connection.
24 En Connec tions Connect the analog audio output jack on your portable audio player to the A UX 3 input jack on the fr ont panel of this unit. 3.5 mm stereo mini plug cable Connecting a portable aud.
25 En Connections PREP ARA TION English If your component supports optical digi tal connections, connect th e optical digital output jack on your component (e.
26 En Connec tions Connect the monaural input jack on your subw oofer to the SUBW OOFER jack on this unit. This connection alone does not output sound from the connected subwoofer .
27 En Connections PREP ARA TION English Connect the supplied D AB antenna to the ANTENN A jack on this unit and secure the D AB antenna vertically in an unobtrusi ve location. y It is recommended that you use TUNE AID ( see page 54) when connecting the D AB antenna in order to maximize DAB reception capability .
28 En Connec tions Once all other connections are complete, pl ug one end of the A C po wer supp ly cable into the A C IN terminal of this unit and then plug the other e nd into the A C w all outlet.
GETTING STARTED 29 En SETUP English 1 Press and hold the mark on the battery cover and then open the cover . 2 Insert the two supplied batteries (AA, R6, UM-3) into the ba ttery compartment. Make sure you insert the batteries according to the polarity markings (+/–).
Getting started 30 En 1 Press ST AND BY/ON to turn on the po wer of this unit. The volume le vel appears in the front panel display , and the current input sour ce and beam mode are displayed. 2 Press ST A NDBY/ON again to set this unit to the standb y mod e.
USING SET MENU 31 En SETUP English This section describes how to display the OSD ( on-screen display) of this unit on your TV screen and to set the parameters for your listening room. Once this is complete, you can enjoy real surround sound while watching TV in the comfort of your o wn home.
Using SET MENU 32 En The follo wing diagr am illustrates th e ov erall flo w of the setup procedure. The flow chart of SET MENU Run A UTO SETUP (IntelliBeam). See “ A UTO SETUP (Inte lliBeam)” on page 34. Look for a remedy . See “Error messages for A U T O SETUP” on page 40 for a complete list of error messages and possible remedies.
CHANGING OSD LANGUAGE 33 En SETUP English This feature allo ws you to select the language of your choice that appears in SET ME NU of this unit. 1 Set the operat ion mode selector to YSP. 2 Press MENU. The SET MENU screen appears on your TV . y • The control buttons used for SET MENU are displayed at the bottom of the screen.
AUTO SETUP (INTELLIBEAM) 34 En This unit creates a sound f ield b y re flecting sound beams on the walls of your listening room and by broadening the cohesion of all the channels. Just as yo u would arrange the speaker position of other audio systems, you need to set the beam angle to enjoy the best possible sound from this unit.
AUTO SETUP (I ntelliBeam) 35 En SETUP English The supplied IntelliBeam micro phone collects and analyzes the sound that th is unit produces in your actual listen ing en vironment.
AUTO SETUP (IntelliBea m) 36 En ■ Assembling the supp lied car dboar d microp hone stand Y ou will find three separate pa rts (one circular part and two longitudinal parts) of th e cardboar d microphone stand originally put together . 1 Disassemble the three pa rts of the cardboar d microphone stand ori ginally put togeth er .
AUTO SETUP (I ntelliBeam) 37 En SETUP English • Make sure that your listening r oom is as quiet as possible while this unit is performing the A UTO SETUP procedure.
AUTO SETUP (IntelliBea m) 38 En 5 Press / to select BEAM+ SOUND OPTIMZ, BEAM OPTIMZ only, or SOUND OPTIMZ only and then press E NTER. The following screen ap pears on your TV .
AUTO SETUP (I ntelliBeam) 39 En SETUP English 8 Check that the f ollo wing screen is displa yed on y our TV . The results of the A UTO SETUP procedure are displayed on your TV . y • If “ENVIRONMENT CHECK [F AIL ED]” is displayed, we rec ommend runn ing the A UTO SETUP procedure again.
AUTO SETUP (IntelliBea m) 40 En ■ Error messa ges for A UT O SETUP Before the A UTO SETUP pr ocedure starts While the A UT O SETUP pr ocedure is in p rogress If one of the errors listed below ex cept E-1 is displayed, press RETURN.
USING THE SYSTEM MEMORY 41 En SETUP English Y ou ca n sav e the current settings adjusted in SET MENU in the system memory of this unit. It is handy to sa ve certain settings according to the v arying conditions of your listening en vironment.
Using the system memory 42 En 5 Press / to select MEMORY1, MEMOR Y2, or MEMOR Y3 and press ENTER. The following screen ap pears on your TV . 6 Press ENTER again. The new parameters are sa ved as MEMOR Y1, MEMOR Y2, or MEMOR Y3. Once the parameters are saved, the display returns to the SE T MENU screen.
Using the system memory 43 En SETUP English 4 Press / to select LO AD and press ENTER. The follo wing screen appears on your TV . 5 Press / to select MEMOR Y1, MEMOR Y2, or MEMOR Y3 and press ENTER. The follo wing screen appears on your TV . 6 Press ENTER again.
PLAYBACK 44 En Y ou can play back sound from the components connected to this unit simply b y pres sing INPUT on the front panel repeatedly or pressing one of the input selector buttons (TV, STB, D VD, A UX1, A UX2, or A UX3) on the remote control.
45 En Playback BA S I C OPERA TION English Press A UX1 (or A UX2) to p l ay ba ck a c om p o ne n t connected to the A UX 1 (o r A UX 2) ja ck on the rear panel of this unit. Press A UX3 to play bac k a component connected to the A UX 3 input jac k on the front panel.
46 En Playback Press V OLUME +/– to increase or decrease the volume level. The numeric value of the volume lev el appears in the front panel display . Control range: MIN (minimum), 01 to 99, MAX (maximum) • The volume lev el of all inpu t sources (including multi-channel as well as stereo sources) changes at the same time.
DAB (DIGITAL AUDIO BROADCASTING) 47 En BA S I C OPERA TION English D AB (Digital Audio Broadcasting), also kno wn as digital radio, is a ne w wa y of ra dio broadcasting. D AB is broadcast using digital signals instead of analog signals, resulting in near CD-quality sound.
48 En DAB (Digital Audio Broadcasting) Before tuning into D AB serv ices, you must perform the initial scan. 1 Press D AB repeatedly to select D AB. “Initiate Scan” appe ars in the front panel display .
49 En DAB (Digital Audio Broadcasting) BA S I C OPERA TION English For D AB tuning, you do not t une in by station frequenc y (like FM/A M), b ut tune in via the channel label instead. There are fi ve D AB tuning modes: ALPHANUMERIC, A CTIVE, ENSEMBLE, F A VOURITE, and PRESET.
50 En DAB (Digital Audio Broadcasting) The PRESET MEMOR Y mode is used to assign up to 99 preset numbers to D AB services. 1 T une into the D AB service you would like to assign a preset number to. 2 Press MEMOR Y. The MEMOR Y indicator flashes for about ten seconds.
51 En DAB (Digital Audio Broadcasting) BA S I C OPERA TION English ■ PRESET tuning W ith PRESET tuning, you can t une into D AB services by entering the assigned preset D AB service number . 1 Switch to D AB recepti on and select PRESET as the tuning mode by follo wing step s 1 through 3 as described in “D AB tuning” on page 49.
52 En DAB (Digital Audio Broadcasting) The DISPLA Y key sho ws v arious information about the service currently being broadcast. y A letter that cannot be displayed in the front panel displa y is displayed as “_” (underscore). Up to 16 characters can be displa yed in the fr ont panel display at one time.
53 En DAB (Digital Audio Broadcasting) BA S I C OPERA TION English Y ou can use the D AB MENU to adjust the D AB tuner parameters and ensem ble/service registry list. T here are fi v e operations in D AB MENU : INIT SCAN, TUNE AID, DRC MODE, PRUNE LIST, and PRESET DELETE .
54 En DAB (Digital Audio Broadcasting) 3 Press ENTER to confirm your selection. The unit begins scanning th e sele cted band(s) for DA B e n s e m bl e s .
55 En DAB (Digital Audio Broadcasting) BA S I C OPERA TION English Dynamic range is the decibe l (dB) range between the highest and lowest sounds in a broadcast. Some D AB broadcasters transmit a wi de dynamic rang e (enabling high quality sound), accomp anied by DRC (Dynamic Range Control) data.
56 En DAB (Digital Audio Broadcasting) Use PR UNE LIST to delete a gr oup of inacti ve ensembles and services from the D AB registry list. 1 Access D AB MENU by f ollo wing steps 1 through 4 as described in “Accessing D AB MENU” on page 53. “INIT SCAN” appears in the front panel display .
USING IPOD™ 57 En BA S I C OPERA TION English This unit has the DOCK terminal on the rear panel that allo ws you to connect the Y amaha iPod uni versal dock (such as YDS-10, sold separately). St ation your iPod in the Y amaha iPod uni versal doc k, and use the supplied remote control to operate your iPod.
58 En Using iPod™ y • For a complete list of status me ssages that appear in the front panel display an d in the OSD, see the “iPod” section in “T roubleshooting” on page 116.
59 En Using iPod™ BA S I C OPERA TION English 4 Press / and / to navigate through the iP od menu, and press ENTER to start play bac k of the selecte d song.
ENJOYING SURROUND SOUND 60 En Y ou can enjoy mu lti-channel surround sound b y changing the be am mode using the beam m ode b uttons on the remote control.
61 En Enjoying surround so und BA S I C OPERA TION English Outputs normal sound from the front left and right channels and sound beams from the center and surround left and right channels.
62 En Enjoying surround sound ■ Decoder indicat ors Depending on the input source and the selected surround mode, the indicators in the fro nt p anel display light up as follow s: y • Y ou can select an input mode (A UTO, DTS, or AN ALOG) by pressing INPUTMODE repeated ly (see page 97).
63 En Enjoying surround so und BA S I C OPERA TION English This unit can decode 2-cha nnel sources for 5.1-channel playback so that you can enjoy a v a riety of surround sound effects b y switching the surround mode.
64 En Enjoying surround sound Y ou can enjoy an alog audio signals output from yo ur TV in real surround sound. y Before perform ing the steps below , set the volume of this unit to 30. If necessary , adjust the volume le vel in step 4 belo w . 1 Select the TV channel you want to watch.
65 En Enjoying surround so und BA S I C OPERA TION English Y ou can configure the parame ters for Dolb y Pro Logic II Music and DTS Neo:6 Music to fine-tune the surround sound effect. 1 Repeat st eps 1 an d 2 in “Enjo ying 2-channel sources in surr ound sound” on page 63 and select PL II Musi c or Neo:6 Music.
ENJOYING STEREO SO UND 66 En Y ou can enjoy 2-channel and 5-channel stereo playback as the beam modes b y pressing STEREO on the remote control. • When you play back Dolby Dig ital audio signals in the 2-chan nel or 5-channel stereo playb ack, the dynamic range becomes compressed.
PLAYING BACK SOUND CLEARLY (MY BEAM) 67 En BA S I C OPERA TION English Y ou can improv e listenability in a noisy en vironment b y changing the beam mode to My Beam, which o utputs sound beams directly tow ard the liste ning position in a single channel.
68 En Playing back sound clearly (My Beam) Y ou can adjust the beam a ngle manually while playing back an input source . This function is also ideal if the listening position is out of th e operation guarantee range of the auto-adjust function. 1 Set the operation mode selector to YSP.
USING SOUND FIELD PROGRAMS 69 En BA S I C OPERA TION English This unit is equipped with a variety of precise digital de coders that allo w you to enjoy multi-channel playback from stereo or multi-channel sources.
70 En Using sound field programs ■ Sound field pr ogram des criptions Y ou can select from the following sound f i eld programs based on your listenin g pref erence when you play music, movie or sports sources. For de tails on ho w to switch betwee n the av ai lable soun d field programs, see page 71.
71 En Using sound field prog rams BA S I C OPERA TION English Y ou can select from three dif ferent CINEMA DSP programs (MUSIC, MO VIE, and SPOR TS) depending on the type of source you want to enjoy . The CINEMA DSP indicator lights up in the front p anel display when one of the CINEMA DSP programs is selected.
72 En Using sound field programs ■ Movie programs Select this CINEMA DSP pr ogram when you play back movie sources, especially th e ones encoded in Dolby Digital, DTS, or Dolby Surro und. This program clearly reproduces dialog and sound effe cts, thus creating a broad and expansi ve cinematic space amid silence.
73 En Using sound field prog rams BA S I C OPERA TION English ■ T urning off CINEMA DSP prog rams T urn of f the CINEMA DSP progr ams if you want to enjo y the original sound without the CINEMA DSP program effect. 1 Set the operat ion mode selector to YSP.
USING THE MUSIC ENHANCER 74 En Y ou can use the Music Enhancer of this unit to impro v e the sound nearest to the original depth and width of compression artifacts suc h as the MP3 format. 1 Set the operation mode selector to YSP. 2 Press ENHANCER to select the Music Enhancer .
USING THE VOLUME MODE (NIGHT LISTEN ING ENHANCER/TV VOLUME EQUAL MODE) 75 En BA S I C OPERA TION English The night listening enhancers are designed to impro ve listenabi lity at lo wer v olumes or at n i ght.
USING TH E SLEEP TIMER 76 En Use this feature to automatic ally set this unit to the st andby mode after a specif ied period of time. The sleep time r is useful if you are going to sleep after a certain amount of time while th is unit is still playing back a source.
77 En Using the sleep timer BA S I C OPERA TION English ■ Canceling th e sleep timer 1 Set the operat ion mode selector to YSP. 2 Press SLEEP repeatedly until “SLE EP OFF” appears in the fr ont panel display . 3 W ait f or a fe w seconds without op erating this unit to confirm the setti ng for the sleep timer .
DISPLAYING THE INPU T SOURCE INFORMATION 78 En Y ou can display the format and samp ling frequency of the current input signal in the front panel display .
USING THE HDMI CONTROL FEATURE 79 En BA S I C OPERA TION English Y ou can operate the following functio ns using the remote control supplied wi th your TV if this unit and an HDMI control-compatible TV (e xcept so me models) are connected via HDMI.
MANUAL SETUP 80 En T o achieve the best quality surro und sound, you can use M ANU AL SETUP to fine-tune the listening en vironment parameters, as well as to ma k e advanced settings for sound signals, sound be ams, digital i nput, and the OSD.
81 En MANUAL SETUP AD V ANC ED OPERA TION English Use the remote control to acce ss and adjust each parameter . y Y ou can adjust the SET MENU parameters while the unit is reproducing sound . 1 Set the operat ion mode selector to YSP. 2 Press MENU. The SET MENU screen appears on your TV .
82 En MANUAL SETUP Use to manually adjus t the va rious parameters related to the sound beam ou tput. SET MENU → MANU AL SETUP → BEAM MENU y Y ou can adjust the sound beam ou tput le vel of each channel in “ Adjusting the audio balance” (see page 94).
83 En MANUAL SETUP AD V ANC ED OPERA TION English • Select ANGL E TO W ALL OR CORNER if this unit is installed in the corner of your listening room. Adjust the width and length of your listen ing room as well as the distance of the listening positi on from this unit.
84 En MANUAL SETUP HORIZONT AL ANGLE (Horizonta l angle) Use to adjust the horizontal angle of sound beams fo r each channel. By adjusting the horizontal angle of the sound beams, you can optimize the so und beam path s. A test tone is automatically output.
85 En MANUAL SETUP AD V ANC ED OPERA TION English FOCAL LENGTH (Focal length) Use to set the distance from the front of t his unit to the focal point of output for each channel t o achiev e an expansi ve feeling for each channel. The focal points except for the center channel should be set near the reflection points on the w alls.
86 En MANUAL SETUP ■ IMA GE LOCA TION (Image location) Use to adjust the direction from which the front left and right channel sound is heard so that each sound can be heard closer to th e center channel.
87 En MANUAL SETUP AD V ANC ED OPERA TION English B ASS OUT (Bass out) Lo w-frequenc y (bass) signals can be directed to the subwoofer and/or the front le ft and right channels. This setting also determines the routing of LFE (lo w-frequency effect) signals found in Do lby Digital or DTS sources.
88 En MANUAL SETUP ■ DD/DTS Dyna mic Range (Dynamic range of Dolb y Digita l and DTS signal s) Use to select the amount of dynamic range compression.
89 En MANUAL SETUP AD V ANC ED OPERA TION English ■ INPUT MODE (Input mode) Use to designate the input mode for the input sources connected to the DIGIT AL IN jacks when you turn on the power of this unit. For info rmation on the types of audio signals that can be output by this unit, see “Selecting the input mode” on page 97.
90 En MANUAL SETUP ■ INPUT RENAME (Input rename) Use to change the name of the input source in the OSD and the front panel display . Pr ess an input selector button (e.g., D VD) to select the compon ent you want to change the name for and perform the follo wing procedure.
91 En MANUAL SETUP AD V ANC ED OPERA TION English VIDEO INFO (Video information) Use to display the video info rmation of the current input signal. Choices: HDMI SIGNAL, HDMI RES., HDMI ERROR • Select HDMI SIGN AL to display the type of the HDMI input/output signals.
92 En MANUAL SETUP • Select ON to ena ble the HDMI control. The sig nals input at the HDMI IN jacks are output at the HDMI OUT jack when this unit is in the standby mode. • Select OFF to disabl e the HDMI control. The signals input at the HDMI IN jacks are not output at the HDMI OUT jack when this unit is in the standby mode.
93 En MANUAL SETUP AD V ANC ED OPERA TION English ■ OSD SET (OSD sett ings) Use to adjust the display position and to set the displa y time of the OSD.
Adjusting the audio balance 94 En Y ou can adjust the sound beam output lev el of each channel by using the test tone or the a udio output being played back in each beam mode to achie v e a more true-to-life surround soun d experience.
95 En Adjusting the audio balance AD V ANC ED OPERA TION English 5 Press TEST when you have completed all your adjustments. • All channel levels cannot be adjusted when the 2-channel or 5-channel stereo playback (see page 63), My Beam (see page 61), or My Surr ound (see page 61) is selected as the beam mode.
96 En Adjusting the audio balance 3 Press / to adjust the channel v olume. Control range: –10.0 dB to +10.0 dB 4 W ait f or a few seconds without operating this unit when yo u have complet ed your adjustment .
Selecting the input mode 97 En AD V ANC ED OPERA TION English Y ou can select the type of audio input signals of the selected input source according to your preference or the conditions of the input source. This function is a v ailable for TV/STB, D VD, A UX1, and A UX2.
Adjusting the system pa rameters 98 En This unit has additional menus th at are displayed in the front panel disp lay . These menus of fer additional operations to adjust and customize the way this unit operate s. When “F .P ANEL KEY ” is set to “F .
99 En Adjusting the system parameters AD V ANC ED OPERA TION English Y ou can protect the settings you sav ed in the system memory of this unit from bei ng accidentally erased or unwantedly changed. 1 Repeat steps 1 to 3 in “Using the system parameters” on page 98.
100 En Adjusting the system pa rameters Y ou can set the maximum v olume le vel so t hat this unit will not output sound beyond th e limited v olume le vel. 1 Repeat steps 1 to 3 in “Using the sy stem parameters” on page 98. 2 Set the operation mode selector to YSP.
101 En Adjusting the system parameters AD V ANC ED OPERA TION English 3 Press / so that “TURN ON V OLUME” is displa yed in the fr ont panel displa y . 4 Press ENTER. 5 Press / to adjust the initial v olume level. Control range: MAX, 99 to 01, OFF Control step: 1 6 Press ST A NDBY/ON on the remote control to set this unit to the standby mode.
102 En Adjusting the system pa rameters 4 Press / to switch between “MON CHK: YES” and “MON CHK: SKIP”. • Select MON CHK: YES to activ ate the monitor check function. • Select MON CHK: SKIP to de acti v ate the moni tor check function. 5 Press ST ANDBY/ON on the remote control to set this unit to the standb y mode.
103 En Adjusting the system parameters AD V ANC ED OPERA TION English 4 Press / to switch between “DEMO: ON” and “DEMO: OFF”. • Select DEMO: ON to acti v ate the demo mode. • Select DEMO: OFF t o deacti v ate the demo mode. 5 Press ST A NDBY/ON on the remote control to set this unit to the standby mode.
104 En Adjusting the system pa rameters 4 Press / to switch between “P .INPUT: ON” and “P .INPUT : OFF”. • Select P .INPUT : ON to enable the INPUT key o n the front panel. • Select P .INPUT : OFF to d isable the INPUT k ey on the front panel.
105 En Adjusting the system parameters AD V ANC ED OPERA TION English 4 Press / to switch between “F .P ANEL: ON” and “F .P ANEL: OFF”. • Select F .P ANEL: ON to enable the front panel keys. • Select F .P ANEL: OFF to disable the front panel key s.
106 En Adjusting the system pa rameters 5 Press / to switch between “PRESET : RESET” and “PRESET : CANCEL”. • Select PRESET : RESET to reset all of the curren t settings. • Select PRESET : CANCEL to cancel the resetting procedure. 6 Press ST ANDBY/ON on the remote control to set this unit to the standb y mode.
Remote control features 107 En AD V ANC ED OPERA TION English In addition to controlling this unit, the remote control can also ope rate other A V components made by Y amaha and other manufacturers.
108 En Remote control features ■ Operating y our TV Set the operation mode se lector to TV/A V, an d press TV to select TV as the input source. The control area of the remote con trol changes to the TV operation mode. 1 Numeric buttons Selects a TV channe l for playback.
109 En Remote control features AD V ANC ED OPERA TION English ■ Operating y our D VD pla yer/recor der Set the operation mode selector to TV/A V and press D VD to select D VD as t he input sour ce. The control area of the remote control changes to the D VD operation mode.
110 En Remote control features ■ Operating y our VCR Set the operation mode selector to TV/A V and press A UX1 to select VCR as the input sour ce. The control area of the remote con trol changes to the A UX1 operation mode. y This operation is av ailable when your VCR is connected to the A UX 1 A UDIO IN jacks on this unit.
111 En Remote control features AD V ANC ED OPERA TION English The TV macro feature ma kes it possible to per form a series of operations with the press of a single b utton. For example, when you w ant to play a D VD, you wo uld normally turn on the component , select D VD as the input source, and press the play bu tton to start playback.
112 En Remote control features ■ Setting macr os f or the TV without the tuning capability 1 Press and hold CODE SET and press one of the input selector b utton s to select the input sour ce yo u want to set macros f or . Proceed to step 2 while holding down CODE SET.
Troubleshooting 113 En ADDITIONAL INFORMA TION English Refer to the chart belo w when this unit does not function prope rly . If the problem you are experiencing is not listed below or if the instruct.
114 En Troubleshooting Problem Cause Remedy See page No sound from the subwoofer . BASS OUT in SUBWOOFER SET is set t o FR ONT. Select SWFR. 87 The sour ce does no t conta in lo w bass sig nals. Distorted o r too little bass sound. CR OSS O VER in SUBWOOFER SET is set incorrec tly .
115 En Troubleshooting ADDITIONAL INFORMA TION English ■ Remote contr ol ■ HDMI Prob lem Cause Remedy See page The remote c ontrol does not work and/or function properly . Wrong dist ance or ang le. The remote c ontrol funct ions within a maximum range o f 6 m (20 ft) and no more than 45 de grees of f-a xis from the fr ont panel.
116 En Troubleshooting ■ DA B ■ iP od In case of a transmission error with no status message appearin g in the front panel display and in the OSD, check the connectio n between your iPod and this unit. Problem Cause Remedy See page Cannot tune into any DAB service s.
Glossary 117 En ADDITIONAL INFORMA TION English ■ Dolby Digital Dolby Digital is a digital surround sound system that giv es you completely independent mu lti-channel audio. W ith 3 front channels (left, center , and right) and 2 surround stereo channels, Dolb y Digita l pro vides 5 full-rang e audio channels.
118 En Glossary ■ LFE 0.1-chann el This channel is for the reproduction of lo w bass signals. The frequenc y range for this channel is 20 Hz to 1 20 Hz. This channel is counted as 0. 1 because it only enforces a low-frequenc y range compared to the full-range reproduction by the other 5/6 ch ann els in Dolby Digital or DTS 5.
DAB frequency table 119 En ADDITIONAL INFORMA TION English Band III DAB frequency table Frequency Channel label 218.640 MHz 11B 220.352 MHz 11C 222.064 MHz 11D 223.
Index 120 En ■ Numerics 3 Beam ............... ........... ......... ........... ........... ......... .......... 61 5 Beam ............... ........... ......... ........... ........... ......... .......... 60 ■ A A C power supply cable ........ .
Specifications 121 En ADDITIONAL INFORMA TION English AMP SECTION • Ma ximum Output Power (JEIT A) .................... ................... .......... 2 W (1 kHz, 10% THD, 4 Ω ) × 40 20 W (100 Hz, 10% THD, 4 Ω ) × 2 SPEAKER SECTION •D r i v e r Small dia.
Specifications 122 En Limited Guarantee f or Eur opean Economic Area (EEA) and Switzerland Thank you for having chosen a Y amaha product. In the unlikely ev ent that your Y amah a product ne eds guarantee serv ice, please co ntact the dealer fr om whom it was purchased.
i List of remote control codes TV ADMIRAL 292, 293, 216 AIW A 294, 276, 283, 284 AKAI 295, 296 ALB A 296 A OC 297 BELL & HOWELL 292 BEST AR 298 BLA UPUNKT 229, 222 BLUE SKY 298 BRANDT 223 BR OC SO.
ii RCA 744, 792, 793 SCIENTIFIC A TLANT A 752, 753, 754, 789 SONY 756, 757 TOCOM 755 UNIVERSAL 769 , 772, 773, 774, 775 VIEWST AR 764, 766, 776 , 777, 778, 779, 782 SA TELLI TE TUNER ECHOST AR 822 GE .
YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGE THORPE AVE., BUEN A PARK, CALIF. 90 620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER A VE., SCARBOR OUGH, ONTAR IO M1S 3R1, C ANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, 2 5462 RELLINGEN BEI HAMB URG, GERMANY YAMAHA ELECTRONIQUE FRANCE S.
Connecting external components such as a TV or DVD player to this unit. Connect your TV or DVD player to this unit using appropriate cables as shown below . After all connections are complete, plug the power supply cable into the AC wall outlet. For further information on connecting other components, see pages 17 to 28 in the Owner’s Manual.
Press ENTER to start the AUTO SETUP procedure, and then leave the room within 10 seconds. The following screen appears on the TV . Leave the room within 10 seconds before the AUTO SETUP procedure starts. The setup screen automatically changes during the AUTO SETUP procedure.
An important point after buying a device Yamaha YSP-40D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Yamaha YSP-40D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Yamaha YSP-40D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Yamaha YSP-40D you will learn all the available features of the product, as well as information on its operation. The information that you get Yamaha YSP-40D will certainly help you make a decision on the purchase.
If you already are a holder of Yamaha YSP-40D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Yamaha YSP-40D.
However, one of the most important roles played by the user manual is to help in solving problems with Yamaha YSP-40D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Yamaha YSP-40D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
